Abstract
To optimize the drilling and blasting process in underground mining using the Holmberg method to create the drilling-and-blasting mesh design. The method it is an experimental applied-type and correlational-level inductive method. The Holmberg method showed good efficiency of 95% because it works with the rock mass and volatility-index parameters of the rock. The total drilling and blasting time with the Holmberg method is 2 h, whereas with the traditional method it will be 8 h because the blasting will not be efficient and there will be an increase in the amount of cutting and/or drilling time. The total cost of the drilling and blasting process in the Holmberg method is 2143.85 soles, while with the traditional method, it is 2820.75 soles, without taking into account the loss and shutdown of production that this would cause.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bayona, F., Arauzo, L., Diaz, G., et al.: Drilling mesh model based on the Holmberg method to increase rock fragmentation in ramps of underground mining companies. In: CISCI 2019 - Decima Octava Conferencia Iberoamericana en Sistemas, Cibernetica e Informatica - Memorias (2019)
Vranješ, B., Andelković, B.: Analysis of the performance of occupational health and safety in the production business system. In: IOP Conference Series: Materials Science and Engineering, vol. 477, no. 1, pp. 0–14 (2019). https://doi.org/10.1088/1757-899X/477/1/012038
Harim S., rock: Optimización blast tira y controlar blast inducida por daños en la zona de excavación túneles mediante diversas clases de 2018. s.l.: Tunelling and underground (2018)
Exsa: Manual practico de voladura. s.l.: Exsa (2017)
Rebolledo Espinoza, F.A.: Desarrollo de metodología de diseño y planificación de tronadura controlada para administrar y controlar riesgos geotécnicos (2018). http://repositorio.uchile.cl/handle/2250/151618. Accessed 19 Nov 2018
Sebor, J., rocas.: Los costos asociados con la perforación son una parte importante de los costos totales de la voladura de 2019. s.l.: Earth Environ, vol. 17 (2019)
Sociedad Nacional de minería, petroleo y energía: SNMPE (2018). http://www.minem.gob.pe/_estadisticaSector.php?idSector=1&idCategoria=10. Accessed 21 Feb 2018
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Poma, M., Quispe, G., Mamani-Macedo, N., Zapata, G., Raymundo-Ibañez, C., Dominguez, F. (2020). Drilling-and-Blasting Mesh Design for Underground Mining Using the Holmberg Method. In: Ahram, T., Taiar, R., Gremeaux-Bader, V., Aminian, K. (eds) Human Interaction, Emerging Technologies and Future Applications II. IHIET 2020. Advances in Intelligent Systems and Computing, vol 1152. Springer, Cham. https://doi.org/10.1007/978-3-030-44267-5_103
Download citation
DOI: https://doi.org/10.1007/978-3-030-44267-5_103
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-44266-8
Online ISBN: 978-3-030-44267-5
eBook Packages: EngineeringEngineering (R0)