Abstract
The main purpose of this article is to describe a proposed methodology to integrate modern construction management tools and procedures such as Lean Construction (LC), Building Information Modeling (BIM), and Virtual Reality (VR) in the planning phase of structural intervention of heritage structures. The proposed methodology that integrates these techniques is referred to as Lean Project Delivery System (LPDS). This paper explains the main principles, tools, techniques, practices and technologies, like VR, laser scanner, and photogrammetry that integrated result in synergy with the design, and planning components of the selection of the structural retrofitting alternatives. The proposed method associates the workflow design, workflow execution, LPDS elements and Management of Heritage Structures (MHS) requirements. The proposed LPDS methodology is applied to the St. Jerome Hall, a sector of the Church of the Nativity, located in Bethlehem, Palestine where the selection of the most feasible structural consolidation technique was required to retrofit this area due to some archaeological excavations. The conclusions drawn from the application of the proposed methodology to this case history may have some biases due to unique constraints in this project related to regional and project specific considerations. However, the paper hopes to contribute by providing an integrated framework for modeling and planning that can improve the state of practice in this area of knowledge.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ICOMOS (2003) ICOMOS charter- principles for the analysis, conservation and structural restoration of architectural heritage
UNESCO World Heritage Centre (2013) Operational guidelines for the implementation of the World Heritage Convention
Koskela L (1992) Application of the new production philosophy to construction. Center for Integrated Facility Engineering, pp 1–81
Pando M, Whelan M, Ramos L, Aguilar R, Fratta D (2017) Preliminary structural and foundation assessment of the historic crusader walls and pillars at the St. Jerome Hall, Church of the Nativity, Bethlehem. Report to the UHL and Armenian Patriarchate by the University of North Carolina at Charlotte
Gonzales M, Pando MA, Whelan M, Ramos L, Aguilar R, Fratta D (2018) Damage assessment and preliminary modelling of the St. Jerome Hall of the Nativity Church in Bethlehem due to archaelogical excavations. Paper submitted to the 2018 SAHC, Cusco, Peru
Brioso X (2015) Integrating ISO 21500 guidance on project management, lean construction and PMBOK. Proced Eng 123:76–84
Brioso X, Humero A, Murguia D, Corrales J, Aranda J (2017) Using post-occupancy evaluation of housing projects to generate value for municipal governments. Alex Eng J. https://doi.org/10.1016/j.aej.2017.01.015 Article in Press
Oreni D, Brumana R, Georgopoulos A, Cuca B (2013) HBIM for conservation and management of built heritage: towards a library of vaults and wooden bean floors. ISPRS Ann Photogramm Remote Sens Spat Inf Sci II-5/W1:215–221
Wang C, Cho YK (2015) Smart scanning and near real-time 3D surface modeling of dynamic construction equipment from a point cloud. Autom Constr 49:239–249
Mills J, Barber D (2004) Geomatics techniques for structural surveying. J Surv Eng 130(2):56–64
Oreni D, Brumana R, Della Torre S, Banfi F, Barazzetti L, Previtali M (2014) Survey turned into HBIM: the restoration and the work involved concerning the Basilica di Collemaggio after the earthquake (L’Aquila). ISPRS Ann Photogramm Remote Sens Spat Inf Sci II-5:267–273
Barazzetti L, Banfi F, Brumana R, Oreni D, Previtali M, Roncoroni F (2015) HBIM and augmented information: towards a wider user community of image and range-based reconstructions. ISPRS Ann Photogramm Remote Sens Spat Inf Sci 40(5W7):35–42
Suhr J (1999) The choosing by advantages decisionmaking system. Quorum, Westport, CT
Arroyo P, Tommelein ID, Ballard G (2016) Selecting globally sustainable materials: a case study using choosing by advantages. J Constr Eng Manag 142(2):5015015
Murguia D, Brioso X (2017) Using ‘choosing by Advantages’ and 4D models to select the best construction-flow option in a residential building. Proced Eng 196:470–477
Acknowledgements
The development of the LPDS methodology component was funded by the Consejo Nacional de Ciencia, Tecnología e Innovación Tecnológica del Perú (CONCYTEC from its acronym in Spanish), according to the Convenio de Gestión N° 232-2015-FONDECYT. The support to the first two authors is greatly appreciated. The team would like to thank Dr. S. Gibson (University of the Holy Land), the head archaeologist working at the SJH for inviting the third and fourth author to work in this project. The third and fourth author would like to thank the Armenian Patriarchate and Father Asbed at the Church of the Nativity convent for the access to the site. Engineer Issa Juha, graduate students Peter Hubbard and Mauricio Gonzales, and Dr. Steve Patterson provided support to the team during the experimental campaign. The opinions presented herein do not necessarily reflect the opinions of CONCYTEC, or of these individuals and their organizations.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 RILEM
About this paper
Cite this paper
Brioso, X., Calderón, C., Aguilar, R., Pando, M.A. (2019). Preliminary Methodology for the Integration of Lean Construction, BIM and Virtual Reality in the Planning Phase of Structural Intervention in Heritage Structures. In: Aguilar, R., Torrealva, D., Moreira, S., Pando, M.A., Ramos, L.F. (eds) Structural Analysis of Historical Constructions. RILEM Bookseries, vol 18. Springer, Cham. https://doi.org/10.1007/978-3-319-99441-3_52
Download citation
DOI: https://doi.org/10.1007/978-3-319-99441-3_52
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-99440-6
Online ISBN: 978-3-319-99441-3
eBook Packages: EngineeringEngineering (R0)