Abstract
Halide perovskites are a compelling candidate for the next generation of clean-energy-harvesting technologies owing to their low cost, facile fabrication and outstanding semiconductor properties. However, photovoltaic device efficiencies are still below practical limits and long-term stability challenges hinder their practical application. Current evidence suggests that strain in halide perovskites is a key factor in dictating device efficiency and stability. Here we outline the fundamentals of strain within halide perovskites relevant to photovoltaic applications and rationalize approaches to characterize the phenomenon. We examine recent breakthroughs in eliminating the adverse impacts of strain, enhancing both device efficiencies and operational stabilities. Finally, we discuss further challenges and outline future research directions for placing stress and strain studies at the forefront of halide perovskite research. An extensive understanding of strain in halide perovskites is needed, which would allow effective strain management and drive further enhancements in efficiencies and stabilities of perovskite photovoltaics.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 print issues and online access
$259.00 per year
only $21.58 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Kim, G. et al. Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells. Science 370, 108–112 (2020).
Saidaminov, M. I. et al. Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air. Nat. Energy 3, 648–654 (2018).
Jones, T. W. et al. Lattice strain causes non-radiative losses in halide perovskites. Energy Environ. Sci. 12, 596–606 (2019).
Chen, Y. et al. Strain engineering and epitaxial stabilization of halide perovskites. Nature 577, 209–215 (2020).
Li, X., Luo, Y., Holt, M. V., Cai, Z. & Fenning, D. P. Residual nanoscale strain in cesium lead bromide perovskite reduces stability and shifts local luminescence. Chem. Mater. 31, 2778–2785 (2019).
Chen, A., Yossef, M. & Zhang, C. Strain effect on the performance of amorphous silicon and perovskite solar cells. Sol. Energy 163, 243–250 (2018).
Yang, C., Song, K., Xu, X., Yao, G. & Wu, Z. Strain dependent effect on power degradation of CIGS thin film solar cell. Sol. Energy 195, 121–128 (2020).
Watson, B. L., Rolston, N., Printz, A. D. & Dauskardt, R. H. Scaffold-reinforced perovskite compound solar cells. Energy Environ. Sci. 10, 2500–2508 (2017).
Yang, B. Stress, Strain, and Structural Dynamics (Elsevier, 2005).
Sun, Y., Thompson, S. E. & Nishida, T. Strain Effect in Semiconductors: Theory and Device Applications (Springer Science & Business Media, 2009).
Ramirez, C., Yadavalli, S. K., Garces, H. F., Zhou, Y. & Padture, N. P. Thermo-mechanical behavior of organic–inorganic halide perovskites for solar cells. Scr. Mater. 150, 36–41 (2018).
Pecharsky, V. & Zavalij, P. Fundamentals of Powder Diffraction and Structural Characterization of Materials (Springer Science & Business Media, 2008).
Tennyson, E. M., Doherty, T. A. S. & Stranks, S. D. Heterogeneity at multiple length scales in halide perovskite semiconductors. Nat. Rev. Mater. 4, 573–587 (2019).
Robinson, I. & Harder, R. Coherent X-ray diffraction imaging of strain at the nanoscale. Nat. Mater. 8, 291–298 (2009).
Rodenburg, J. M. Ptychography and related diffractive imaging methods. Adv. Imaging Electron Phys. 150, 87–184 (2008).
Xue, D. J. et al. Regulating strain in perovskite thin films through charge-transport layers. Nat. Commun. 11, 1514 (2020).
Zhao, J. et al. Strained hybrid perovskite thin films and their impact on the intrinsic stability of perovskite solar cells. Sci. Adv. 3, eaao5616 (2017).
Zhang, B. et al. NiO/perovskite heterojunction contact engineering for highly efficient and stable perovskite solar cells. Adv. Sci. 7, 1903044 (2020).
Zhang, C. C. et al. Perovskite films with reduced interfacial strains via a molecular-level flexible interlayer for photovoltaic application. Adv. Mater. 32, e2001479 (2020).
Rolston, N. et al. Engineering stress in perovskite solar cells to improve stability. Adv. Energy Mater. 8, 1802139 (2018).
Jiao, Y. et al. Strain engineering of metal halide perovskites on coupling anisotropic behaviors. Adv. Funct. Mater. 31, 2006243 (2021).
Zheng, X. et al. Improved phase stability of formamidinium lead triiodide perovskite by strain relaxation. ACS Energy Lett. 1, 1014–1020 (2016).
Howard, C. J. & Stokes, H. T. Group-theoretical analysis of octahedral tilting in perovskites. Acta Cryst. B 54, 782–789 (1998).
Carpenter, M. A. et al. Structural evolution, strain and elasticity of perovskites at high pressures and temperatures. J. Mineral. Petrol. Sci. 101, 95–109 (2006).
Carpenter, M. A., Becerro, A. I. & Seifert, F. Strain analysis of phase transitions in (Ca,Sr)TiO3 perovskites. Am. Mineral. 86, 348–363 (2001).
Khachaturyan, A. G. Theory of Structural Transformations in Solids (Courier Corporation, 2013).
Chou, C. C. & Wayman, C. M. Cubic to tetragonal martensitic transformation in lead titanate (PbTiO3) single crystals. Mater. Trans. JIM 33, 306–317 (1992).
Bhadeshia, H. K. D. H. Martensite in Steels (Department of Materials Science & Metallurgy, Univ. Cambridge, 2020).
Prakash, A. et al. Self-assembled periodic nanostructures using martensitic phase transformations. Nano Lett. 21, 1246–1252 (2021).
Kim, D. et al. Light- and bias-induced structural variations in metal halide perovskites. Nat. Commun. 10, 444 (2019).
Brennan, M. C., Draguta, S., Kamat, P. V. & Kuno, M. Light-induced anion phase segregation in mixed halide perovskites. ACS Energy Lett. 3, 204–213 (2018).
Bischak, C. G. et al. Origin of reversible photoinduced phase separation in hybrid perovskites. Nano Lett. 17, 1028–1033 (2017).
Muscarella, L. A. et al. Lattice compression increases the activation barrier for phase segregation in mixed-halide perovskites. ACS Energy Lett. 5, 3152–3158 (2020).
Tsai, H. et al. Light-induced lattice expansion leads to high-efficiency perovskite solar cells. Science 360, 67–70 (2018).
Rolston, N. et al. Comment on ‘Light-induced lattice expansion leads to high-efficiency perovskite solar cells’. Science 368, eaay8691 (2020).
Jariwala, S. et al. Local crystal misorientation influences non-radiative recombination in halide perovskites. Joule 3, 3048–3060 (2019).
Doherty, T. A. S. et al. Performance-limiting nanoscale trap clusters at grain junctions in halide perovskites. Nature 580, 360–366 (2020).
Hytch, M. J., Putaux, J. L. & Thibault, J. Stress and strain around grain-boundary dislocations measured by high-resolution electron microscopy. Phil. Mag. 86, 4641–4656 (2006).
Xiao, X. et al. Benign ferroelastic twin boundaries in halide perovskites for charge carrier transport and recombination. Nat. Commun. 11, 2215 (2020).
Yang, W., Zhong, D., Shi, M., Qu, S. & Chen, H. Toward highly thermal stable perovskite solar cells by rational design of interfacial layer. iScience 22, 534–543 (2019).
Zhu, C. et al. Strain engineering in perovskite solar cells and its impacts on carrier dynamics. Nat. Commun. 10, 815 (2019).
Feldmann, S. et al. Photodoping through local charge carrier accumulation in alloyed hybrid perovskites for highly efficient luminescence. Nat. Photon. 14, 123–128 (2020).
Prasanna, R. et al. Band gap tuning via lattice contraction and octahedral tilting in perovskite materials for photovoltaics. J. Am. Chem. Soc. 139, 11117–11124 (2017).
McKenna, K. P. Electronic properties of {111} twin boundaries in a mixed-ion lead halide perovskite solar absorber. ACS Energy Lett. 3, 2663–2668 (2018).
Ghosh, D., Aziz, A., Dawson, J. A., Walker, A. B. & Islam, M. S. Putting the squeeze on lead iodide perovskites: pressure-induced effects to tune their structural and optoelectronic behavior. Chem. Mater. 31, 4063–4071 (2019).
Du, Q. et al. Stacking effects on electron–phonon coupling in layered hybrid perovskites via microstrain manipulation. ACS Nano 14, 5806–5817 (2020).
Dou, L. et al. Atomically thin two-dimensional organic–inorganic hybrid perovskites. Science 349, 1518–1521 (2015).
Walsh, A. & Stranks, S. D. Taking control of ion transport in halide perovskite solar cells. ACS Energy Lett. 3, 1983–1990 (2018).
Yang, T. Y., Gregori, G., Pellet, N., Gratzel, M. & Maier, J. The significance of ion conduction in a hybrid organic–inorganic lead-iodide-based perovskite photosensitizer. Angew. Chem. Int. Ed. 54, 7905–7910 (2015).
Hutter, E. M. et al. Thermodynamic stabilization of mixed-halide perovskites against phase segregation. Cell Rep. Phys. Sci. 1, 100120 (2020).
Voorhees, P. W. & Johnson, W. C. The thermodynamics of elastically stressed crystals. Solid State Phys. 59, https://doi.org/10.1016/S0081-1947(04)80003-1 (2004).
Cahn, J. W. Coherent fluctuations and nucleation in isotropic solids. Acta Metall. 10, 907–913 (1962).
Cook, H. E. & de Fontaine, D. On the elastic free energy of solid solutions—I. Microscopic theory. Acta Metall. 17, 915–924 (1969).
Heimann, R. B. Classic and Advanced Ceramics: from Fundamentals to Applications (Wiley–VCH, 2010).
Wang, H. et al. Interfacial residual stress relaxation in perovskite solar cells with improved stability. Adv. Mater. 31, 1904408 (2019).
Kong, L. et al. Simultaneous band-gap narrowing and carrier-lifetime prolongation of organic–inorganic trihalide perovskites. Proc. Natl Acad. Sci. USA 113, 8910–8915 (2016).
Ong, K. P., Goh, T. W., Xu, Q. & Huan, A. Structural evolution in methylammonium lead iodide CH3NH3PbI3. J. Mater. Chem. A 119, 11033–11038 (2015).
Osherov, A. et al. The impact of phase retention on the structural and optoelectronic properties of metal halide perovskites. Adv. Mater. 28, 10757–10763 (2016).
Stavrakas, C. et al. Influence of grain size on phase transitions in halide perovskite films. Adv. Energy Mater. 9, 1901883 (2019).
Freund, L. B. & Suresh, S. Thin Film Materials: Stress, Defect Formation and Surface Evolution (Cambridge Univ. Press, 2004).
Rolston, N. et al. Mechanical integrity of solution-processed perovskite solar cells. Extrem. Mech. Lett. 9, 353–358 (2016).
Chen, H. et al. Flexible optoelectronic devices based on metal halide perovskites. Nano Res. 13, 1997–2018 (2020).
Wang, K. et al. Isothermally crystallized perovskites at room-temperature. Energy Environ. Sci. 13, 3412–3422 (2020).
Dewi, H. A. et al. Excellent intrinsic long-term thermal stability of co-evaporated MAPbI3 solar cells at 85 °C. Adv. Funct. Mater. 31, 2100557 (2021).
Chiang, Y.-H., Anaya, M. & Stranks, S. D. Multisource vacuum deposition of methylammonium-free perovskite solar cells. ACS Energy Lett. 5, 2498–2504 (2020).
Saliba, M. et al. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance. Science 354, 206–209 (2016).
Lee, J.-W. et al. 2D perovskite stabilized phase-pure formamidinium perovskite solar cells. Nat. Commun. 9, 3021 (2018).
Rolston, N. et al. Effect of cation composition on the mechanical stability of perovskite solar cells. Adv. Energy Mater. 8, 1702116 (2018).
Roose, B., Dey, K., Chiang, Y.-H., Friend, R. H. & Stranks, S. D. Critical assessment of the use of excess lead iodide in lead halide perovskite solar cells. J. Phys. Chem. Lett. 11, 6505–6512 (2020).
Li, X. et al. Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides. Nat. Chem. 7, 703–711 (2015).
Wu, J. et al. A simple way to simultaneously release the interface stress and realize the inner encapsulation for highly efficient and stable perovskite solar cells. Adv. Funct. Mater. 29, 1905336 (2019).
Cao, J. et al. Enhanced performance of planar perovskite solar cells induced by van der Waals epitaxial growth of mixed perovskite films on WS2 flakes. Adv. Funct. Mater. 30, 2002358 (2020).
Lu, C. & Tang, L. Comment on ‘Spin coating epitaxial films’. Science 365, eaay3894 (2019).
Tu, Q. et al. Out-of-plane mechanical properties of 2D hybrid organic–inorganic perovskites by nanoindentation. ACS Appl. Mater. Interfaces 10, 22167–22173 (2018).
Zhang, C. et al. Fabrication strategy for efficient 2D/3D perovskite solar cells enabled by diffusion passivation and strain compensation. Adv. Energy Mater. 10, 2002004 (2020).
Lei, Y. et al. A fabrication process for flexible single-crystal perovskite devices. Nature 583, 790–795 (2020).
Rothmann, M. U. et al. Atomic-scale microstructure of metal halide perovskite. Science 370, eabb5940 (2020).
Watson, B. L. et al. Cross-linkable, solvent-resistant fullerene contacts for robust and efficient perovskite solar cells with increased JSC and VOC. ACS Appl. Mater. Interfaces 8, 25896–25904 (2016).
Dai, Z. et al. Interfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability. Science 372, 618–622 (2021).
Dong, Q. et al. Flexible perovskite solar cells with simultaneously improved efficiency, operational stability, and mechanical reliability. Joule 5, 1587–1601 (2021).
Dong, Q. et al. Interpenetrating interfaces for efficient perovskite solar cells with high operational stability and mechanical robustness. Nat. Commun. 12, 973 (2021).
Sun, S., Fang, Y., Kieslich, G., White, T. J. & Cheetham, A. K. Mechanical properties of organic–inorganic halide perovskites, CH3NH3PbX3 (X = I, Br and Cl), by nanoindentation. J. Mater. Chem. A 3, 18450–18455 (2015).
Glazer, A. M. The classification of tilted octahedra in perovskites. Acta Cryst. B 28, 3384–3392 (1972).
Bechtel, J. S. & Van der Ven, A. Octahedral tilting instabilities in inorganic halide perovskites. Phys. Rev. Mater. 2, 025401 (2018).
Filip, M. R., Eperon, G. E., Snaith, H. J. & Giustino, F. Steric engineering of metal-halide perovskites with tunable optical band gaps. Nat. Commun. 5, 5757 (2014).
Boyd, C. C., Cheacharoen, R., Leijtens, T. & McGehee, M. D. Understanding degradation mechanisms and improving stability of perovskite photovoltaics. Chem. Rev. 119, 3418–3451 (2019).
Bush, K. A. et al. Controlling thin-film stress and wrinkling during perovskite film formation. ACS Energy Lett. 3, 1225–1232 (2018).
Yadavalli, S. K., Dai, Z., Zhou, H., Zhou, Y. & Padture, N. P. Facile healing of cracks in organic–inorganic halide perovskite thin films. Acta Mater. 187, 112–121 (2020).
Dai, Z. et al. Effect of grain size on the fracture behavior of organic–inorganic halide perovskite thin films for solar cells. Scr. Mater. 185, 47–50 (2020).
Birkholz, M. Thin Film Analysis by X-ray Scattering (Wiley-VCH, 2006).
Ma, S. et al. Strain-mediated phase stabilization: a new strategy for ultrastable α-CsPbI3 perovskite by nanoconfined growth. Small 15, 1900219 (2019).
Steele, J. A. et al. Thermal unequilibrium of strained black CsPbI3 thin films. Science 365, 679–684 (2019).
Kum, H. et al. Epitaxial growth and layer-transfer techniques for heterogeneous integration of materials for electronic and photonic devices. Nat. Electron. 2, 439–450 (2019).
Narayan, J. & Larson, B. C. Domain epitaxy: a unified paradigm for thin film growth. J. Appl. Phys. 93, 278–285 (2002).
Nishimura, K. et al. Relationship between lattice strain and efficiency for Sn-perovskite solar cells. ACS Appl. Mater. Interfaces 11, 31105–31110 (2019).
Kapil, G. et al. Strain relaxation and light management in tin–lead perovskite solar cells to achieve high efficiencies. ACS Energy Lett. 4, 1991–1998 (2019).
Li, H. & Zhang, W. Perovskite tandem solar cells: from fundamentals to commercial deployment. Chem. Rev. 120, 9835–9950 (2020).
Knight, A. J. & Herz, L. M. Preventing phase segregation in mixed-halide perovskites: a perspective. Energy Environ. Sci. 13, 2024–2046 (2020).
Grüninger, H. et al. Microscopic (dis)order and dynamics of cations in mixed FA/MA lead halide perovskites. J. Phys. Chem. C 125, 1742–1753 (2021).
Kodur, M. et al. X-ray microscopy of halide perovskites: techniques, applications, and prospects. Adv. Energy Mater. 10, 1903170 (2020).
Wu, C., Chen, K., Guo, D. Y., Wang, S. L. & Li, P. G. Cations substitution tuning phase stability in hybrid perovskite single crystals by strain relaxation. RSC Adv. 8, 2900–2905 (2018).
Szostak, R. et al. Nanoscale mapping of chemical composition in organic-inorganic hybrid perovskite films. Sci. Adv. 5, eaaw6619 (2019).
Liu, Y. et al. Chemical nature of ferroelastic twin domains in CH3NH3PbI3 perovskite. Nat. Mater. 17, 1013–1019 (2018).
Newton, M. C., Leake, S. J., Harder, R. & Robinson, I. K. Three-dimensional imaging of strain in a single ZnO nanorod. Nat. Mater. 9, 120–124 (2010).
Li, Y. et al. Unravelling degradation mechanisms and atomic structure of organic–inorganic halide perovskites by cryo-EM. Joule 3, 2854–2866 (2019).
Rothmann, M. U., Li, W., Etheridge, J. & Cheng, Y.-B. Microstructural characterisations of perovskite solar cells—from grains to interfaces: techniques, features, and challenges. Adv. Energy Mater. 7, 1700912 (2017).
Zhou, Y., Sternlicht, H. & Padture, N. P. Transmission electron microscopy of halide perovskite materials and devices. Joule 3, 641–661 (2019).
Hong, K.-H., Kim, J., Lee, S.-H. & Shin, J. K. Strain-driven electronic band structure modulation of Si nanowires. Nano Lett. 8, 1335–1340 (2008).
Manzeli, S., Allain, A., Ghadimi, A. & Kis, A. Piezoresistivity and strain-induced band gap tuning in atomically thin MoS2. Nano Lett. 15, 5330–5335 (2015).
Si, C., Sun, Z. & Liu, F. Strain engineering of graphene: a review. Nanoscale 8, 3207–3217 (2016).
Jia, M. Z. et al. Exploring ion migration in Li2MnSiO4 for Li-ion batteries through strain effects. RSC Adv. 7, 26089–26096 (2017).
Leppert, L., Reyes-Lillo, S. E. & Neaton, J. B. Electric field- and strain-induced Rashba effect in hybrid halide perovskites. J. Phys. Chem. Lett. 7, 3683–3689 (2016).
Stranks, S. D. & Plochocka, P. The influence of the Rashba effect. Nat. Mater. 17, 381–382 (2018).
Yuan, M. et al. Perovskite energy funnels for efficient light-emitting diodes. Nat. Nanotechnol. 11, 872–877 (2016).
Shu, L. et al. Photoflexoelectric effect in halide perovskites. Nat. Mater. 19, 605–609 (2020).
Acknowledgements
W.Z. acknowledges UK Engineering and Physical Sciences Research Council (EPSRC) New Investigator Award (2018; EP/R043272/1) and Newton Advanced Fellowship (192097) for financial support. S.D.S. acknowledges the support from the Royal Society and Tata Group (UF150033), the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (HYPERION, grant agreement no. 756962) and EPSRC under grant reference EP/R023980/1. D. Liu acknowledges China Scholarship Council (CSC, no. 201908310074) for financial support. D. Luo and Z.-H.L. acknowledge the Natural Science and Engineering Research Council of Canada. A.N.I. acknowledges a scholarship from the British Spanish Society. K.W.P.O. acknowledges funding from an EPSRC studentship. T.A.S.D. acknowledges support of a National University of Ireland (NUI) Travelling Studentship. We acknowledge M. Anaya for fruitful discussions.
Author information
Authors and Affiliations
Contributions
D. Liu, D. Luo, A.N.I. and K.W.P.O. contributed equally to conceiving and writing the first draft. All authors contributed to the discussion of content and revisions of the manuscript.
Corresponding authors
Ethics declarations
Competing interests
S.D.S. is a co-founder of Swift Solar, Inc. All other authors declare no competing interests.
Additional information
Peer review information Nature Materials thanks the anonymous reviewers for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Liu, D., Luo, D., Iqbal, A.N. et al. Strain analysis and engineering in halide perovskite photovoltaics. Nat. Mater. 20, 1337–1346 (2021). https://doi.org/10.1038/s41563-021-01097-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41563-021-01097-x
This article is cited by
-
Hydrothermally grown Cu doped NiMnO3 perovskite nanostructures suitable for optoelectronic, photoluminescent and electrochemical properties
Scientific Reports (2024)
-
Intragrain impurity annihilation for highly efficient and stable perovskite solar cells
Nature Communications (2024)
-
Hyperbranched polymer functionalized flexible perovskite solar cells with mechanical robustness and reduced lead leakage
Nature Communications (2023)
-
Challenges and opportunities for the mechanical reliability of metal halide perovskites and photovoltaics
Nature Energy (2023)
-
Stability challenges for the commercialization of perovskite–silicon tandem solar cells
Nature Reviews Materials (2023)