Figures
Abstract
The objective of this research was to develop a methodology for optimizing multilayer-perceptron-type neural networks by evaluating the effects of three neural architecture parameters, namely, number of hidden layers (HL), neurons per hidden layer (NHL), and activation function type (AF), on the sum of squares error (SSE). The data for the study were obtained from quality parameters (physicochemical and microbiological) of milk samples. Architectures or combinations were organized in groups (G1, G2, and G3) generated upon interspersing one, two, and three layers. Within each group, the networks had three neurons in the input layer, six neurons in the output layer, three to twenty-seven NHL, and three AF (tan-sig, log-sig, and linear) types. The number of architectures was determined using three factorial-type experimental designs, which reached 63, 2 187, and 50 049 combinations for G1, G2 and G3, respectively. Using MATLAB 2015a, a logical sequence was designed and implemented for constructing, training, and evaluating multilayer-perceptron-type neural networks using parallel computing techniques. The results show that HL and NHL have a statistically relevant effect on SSE, and from two hidden layers, AF also has a significant effect; thus, both AF and NHL can be evaluated to determine the optimal combination per group. Moreover, in the three study groups, it is observed that there is an inverse relationship between the number of processors and the total optimization time.
Citation: Castro W, Oblitas J, Santa-Cruz R, Avila-George H (2017) Multilayer perceptron architecture optimization using parallel computing techniques. PLoS ONE 12(12): e0189369. https://doi.org/10.1371/journal.pone.0189369
Editor: Alexandre G. de Brevern, UMR-S1134, INSERM, Université Paris Diderot, INTS, FRANCE
Received: November 8, 2016; Accepted: September 22, 2017; Published: December 13, 2017
Copyright: © 2017 Castro et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Data Availability: All relevant data are within the paper and its Supporting Information files.
Funding: The author(s) received no specific funding for this work.
Competing interests: The authors have declared that no competing interests exist.
Introduction
In applied research, it is common to encounter situations in which it is necessary to estimate the behavior of a variable as a function of one or many predictor variables. Traditionally, the solution is provided by statistical regression models for prediction problems, discriminant analysis, or logistic regression models [1, 2]. A group of techniques known as artificial intelligence offers other options, including artificial neural networks, genetic algorithms, and fuzzy logic, among others, which are suitable for solving complex problems [3–6].
Artificial neural networks (ANNs), which are non-linear models inspired by the neural architecture of the brain, were developed in an attempt to model the learning capacity of biological neural systems [7]. A typical ANN architecture known as multilayer perceptron (MLP) contains a series of layers, composed of neurons and their connections. An artificial neuron has the ability to calculate the weighted sum of its inputs and then applies an activation function to obtain a signal that will be transmitted to the next neuron.
The development of MLP networks has two main problems: architecture optimization and training. The definition of architecture is a very relevant point because a lack of connections can make the network incapable of solving the problem of insufficient adjustable parameters, whereas an excess of connections may cause an over-fitting of the training data [8]. Consequently, training MLP networks for large datasets is very time consuming [9].
Determination of the optimal architecture is a constant goal in research papers [10–12], which attempt to minimize an objective function, mean squared error or prediction residual sum of squares errors and avoid the oversize of the network; the method used in these research works is trial and error. However, the trial and error method limits the capacity of analyzable architectures and reduces the likelihood of finding an optimal architecture, particularly if we have a large number of possible architectures. Different approaches have been proposed to optimize the architecture of an MLP network, for example, back-propagation [13], genetic algorithms [14], ant colony [15], bee swarm [16], and Tabu search [17], among others.
Similarly, different approaches have been proposed to manage the expensive training phase, for example, the use of multicore CPU [18–20], cloud computing [21] and hybrid algorithms [8, 15], among others.
In this paper, we focus on the problem of constructing an optimal multilayer perceptron network architecture. Given the popularity and easy access to equipment with large multi-core multiprocessing or GPU capabilities, which enable the parallel calculation of multiple operations, a comprehensive approach to finding the optimal architecture of a multilayer perceptron network is proposed. Four versions of the proposed approach, i.e., sequential, multi-core, GPU and a hybrid algorithm, are introduced.
The objectives of this research are as follows: (a) propose a methodology for optimizing multilayer-perceptron-type neural networks, (b) evaluate the effects of the different structural parameters on the sum of squares error, and (c) evaluate the performance of the optimization process using parallel computing techniques.
Materials and methods
Materials
As a biological material, 252 milk samples from Holstein cows (40 cc/sample) were collected. Sampling was conducted between July and August 2014. The milk samples were not collected exclusively for this work; they were provided by employees of Nestlé S. A. from 12 centers located in the countryside of Cajamarca, Peru. Fig 1 shows the map of the Cajamarca region, where the twelve points of milk collection are indicated, and Table 1 shows the geographic coordinates of each of the twelve points.
Nestlé is an internationally recognized company that is very committed to the welfare of animals, as indicated by their strict guidelines for animal care [22].
Computing system
A computer called Perseo was used for the experiment, which is a shared-memory multiprocessor. Perseo is part of the network of computer equipment belonging to the Centro Nayarita de Innovación y Transferencia de Tecnología A.C, Mexico.
The main characteristics of Perseo are as follows:
- Processor = 24 Intel(R) Xeon(R) CPU ES-2670 v3 @ 2.30 GHz
- CPU cores = 24
- RAM Memory = 32 GB
- Graphic card = NVIDIA Quadro K4200
- Operating System = Ubuntu 14.04
The software used for implementing the logical sequences was MATLAB version 2015a.
Experimental methodology
Obtaining training and validation data.
Samples were packed in sampling bottles and transported to the lab of the Nestle plant, located in the city of Cajamarca, where they were characterized as shown in Table 2.
The data obtained from each sample were divided into three input values: density (Dn), oxidation-reduction potential (Rd), and potential of hydrogen (pH). Moreover, six output parameters were defined: proteins (Pr), lactose (Lc), total solids (Ts), solids-fat (Sf), solids-non-fat (Snf), and minerals (Mn).
Condensed architecture for multilayer perceptrons.
Fig 2 shows the proposed multilayer perceptron architecture, which is based on the following works [27–29].
The structural parameters to evaluate and their ranges were established in accordance with [30]; see Table 3.
After modifying the number of hidden layers, inter-spacing from one to three hidden layers, different architectural groups were generated, as shown in Fig 3.
For the bias parameter values and weightings, prior initiation to zero was determined during the optimization process.
Experimental designs and generation of combinations per group.
Table 4 shows the experimental designs used in this research work; the architectures were generated per group and evaluated using factorial designs without repetition.
The position of each element within the groups and the number of combinations (treatments) per experimental design are detailed in Table 5.
Combinations per group according to the proposed designs were generated using the statistical software Statgraphics Centurion XVI.
Perceptrons per group of combinations: Generation and evaluation.
To create, train and simulate MLP-type networks, MATLAB’s Neural Network Toolbox was used, particularly the function newff, whose syntax is shown in Eq (1).
(1)
where:
- p: is the vector of input values.
- t: is the vector of output values.
- Gi,j is a combination per group (i: group; j: combination number).
The networks per group were evaluated by determining the sum of squares error (SSE) using a logical sequence. This sequence was implemented in the mathematical software MATLAB 2015a; see Fig 4.
Likewise, due to the large number of combinations per group and the high calculation time cost, the analysis sequence was implemented using profiling, vectorization and parallel computing techniques.
Initially, a sequential version of the proposed algorithm was developed (MLP-SEQ), which was implemented using profiling and vectorization techniques. However, since the algorithm has a comprehensive search approach, it is time consuming. Theoretically, the time required by an algorithm to calculate the solution to a given problem using a single processor could be linearly decreased by adding more processors. Following this idea, we developed the following algorithms to attempt to reduce the processing time.
- NNTB-GPU development is based on MATLAB’s Neural Network Toolbox, where the idea is to take advantage of the computation based on the GPU and to process the search space in parallel.
- NNTB-CPU is also based on MATLAB’s Neural Network Toolbox, where the idea is to take advantage of multi-CPU architectures to process data faster.
- NNTB-Hybrid merges the two previous approaches.
- PCTB-CPU is based on MATLAB’s Parallel Computing Toolbox, proposing a distributed computing approach (master-worker).
Analysis of evaluation times per group of combinations.
Acceleration and efficiency are some of the most important measurements for assessing the quality of the implementation of a logical sequence (algorithm) on an architecture of multiprocessors [31]. The acceleration of a logical sequence implemented in parallel executed using n processors is the ratio between the time that it takes the best logical sequence implemented sequentially to be executed using a single processor in a computer and the time that it takes the corresponding logical sequence implemented in parallel to be executed on the same computer using n processors; see Eq (2).
(2)
where
- S: Acceleration.
- T0: Computing time with one processor.
- Tn: Time with n processors.
If acceleration is normalized by dividing it by the number of processors, then efficiency is obtained; see Eq (3).
(3)
where
- η: Efficiency.
- Sn: Speedup with one processor.
- n: Number of processors.
Parallel and sequential versions of the logical sequence shown in Fig 4 were developed. The obtained results were analyzed in terms of acceleration and efficiency.
Results and discussion
Training data
The data collected during the milk analysis stage and later used in constructing, training, and evaluating the networks are shown in Table 6.
The results shown are similar to those reported by [32], who analyzed the microbiological composition and quality of dairy cattle in southern Peru.
Combinations by groups of neural architectures
The first ten combinations by groups of neural architectures, which were used in the construction of neural networks, are shown in Fig 5.
As can be appreciated, the architecture groups (G1, G2, and G3) differ in the number of hidden layers (HL), which is a parameter that controls network accuracy. Within each group, the differences are found in the number of neurons and the type of activation function. This parameter has been researched as an element for neural network optimization in previous works, such as those reported by [33, 34].
Architecture group analysis
The idea of applying parallel computing techniques in the area of neural networks has been used in the following research papers [18–21]. As shown, the use of distributed computing has been used mainly in the training phase of the neural network, which generally consumes considerable computational resources when neural networks are vast and complex.
In this work, we developed three algorithms using the parallel techniques provided in MATLAB’s Neural Network Toolbox; these algorithms are NNTB-GPU, NNTB-CPU, and NNTB-Hybrid. To compare their performance, we used the G2 dataset. The NNTB-GPU algorithm used all the resources provided by a NVIDIA Quadro K4200 card; NNTB-CPU was run using four processors; finally, NNTB-Hybrid was run using four processors and the graphics card. The execution time, in seconds, of each algorithm was 3 028, 2 911, and 3 634, respectively, with the algorithm NNTB-CPU obtaining better performance.
However, by running our sequential algorithm using the G2 dataset, the processing lasted only 637 seconds. The reasons for this result could be the following: (1) the functions that we use to parallelize the NNTB-GPU, NNTB-CPU and NNTB-Hybrid algorithms obtain good performance when neural networks are complex, i.e., many input and output neurons, many hidden layers, and so forth. However, as shown in Fig 3, the neural networks that are processed in this research work do not typically have a complex structure. For this reason, the three approaches previously mentioned spend more time in establishing the parallel environment than in processing a particular neural network. In fact, the problem that we are facing is to process many small neural networks to find the optimal architecture.
Therefore, we developed the PCTB-CPU algorithm, which is based on the general functions of the MATLAB PCTB. This algorithm uses a master-slave approach and creates a balanced distribution of work among all available workers, i.e., the total number of architectures to be tested is divided equally among the workers. The workers report their partial results to the master, and the master is responsible for integrating all the information and submitting the result. Following the previous example, the PCTB-CPU algorithm was tested using four workers to process the dataset G2. This time, the duration was 218 seconds, which means that it achieved 85% of the theoretical acceleration. Using this algorithm, the datasets G1, G2, and G3 were processed.
Regarding the resulting SSE by groups, according to factors, they are illustrated in Fig 6, and they show that increasing the hidden layers reduces SSE dispersion, generating more robust multilayer perceptrons; the results agree with the work of Garcia et al. [35] about the relationship between the number of layers and the network efficiency, as well as with the results obtained by Izquierdo et al. [33], who evaluated different structures until they determined the optimal ones for their study conditions.
The analysis of the multifactorial variance for the SSE within each group according to NHL and AF is shown in Tables 7–9.
From the P-value, it is determined that the NHL has a statistically significant effect on the SSE in each group and that as of the second group (second hidden layer), the AF is added to it.
When evaluating the SSE and their relationship with the structural parameters per group, images a, b, and c in Fig 7 are obtained. It can be observed that increasing the NHL reduced the SSE until a minimal value is reached, and later increases cause an increase in the SSE. This result is possibly due to the effect of over training, as explained by Velásquez et al. [36] in their study.
It is also observed that the SSE exhibits a different behavior for the various types of AFs and the layer to which they connect. Therefore, the neural structure should be optimized by minimizing the SSE according to the NHL and AF, determining the best combination of said parameters. Table 10 presents the optimal values for the evaluated groups, as well as the minimal SSEs.
Optimization process times
During the experimental process, to measure the performance of the proposed logical sequence, three parameters (computing time, acceleration and efficiency) were used as references.
The times for determining the SSE in the various groups are shown in Fig 8. According to [33], the processing times may vary according to the characteristics of the equipment where the logical sequence is implemented. However, the trends shown by the results are similar to those obtained in the work by [37] when the number of processors was successively increased to the process.
From the analysis of the optimization process times, it is inferred that the implementation requires a large calculation capacity for practical applications. In that sense, the speedup values of the optimization process, Fig 9, show that there is an inverse relationship between the number of processors and the total optimization times with a constant tolerance for the various groups under study.
The information shown in Figs 8 and 9 are complemented with an analysis of the logical sequence efficiency. Fig 10 shows the efficiency achieved by the proposed parallel algorithm each time that it was tested using the G1, G2, and G3 treatment sets. For the G1 case, the efficiency quickly decreases, which may be because more time is spent establishing the parallel environment than processing treatment. However, for the G2 and G3 cases, the algorithm reported an efficiency of over 70% even when using the maximum number of processors. This result indicates that the proposed parallel algorithm could scale considerably for larger experimental designs.
Conclusions
The optimal architecture of a multilayer-perceptron-type neural network may be achieved using an analysis sequence of structural parameter combinations.
The number of hidden layers and the number of neurons per layer have statistically significant effects on the SSE. Likewise, the SSE shows a different behavior with respect to the various types of AF and the layer to which they connect.
The implementation of the logical sequence of the optimization is possible by applying parallel computing to the process, which reduces the process time and, depending on the number of processors, improves the performance.
References
- 1. Vu DH, Muttaqi KM, Agalgaonkar AP. A variance inflation factor and backward elimination based robust regression model for forecasting monthly electricity demand using climatic variables. Applied Energy. 2015;140:385–394.
- 2.
Box GEP, Jenkins GM, Reinsel GC, Ljung GM. Time series analysis: forecasting and control. John Wiley & Sons; 2015.
- 3. Esteva A, Kuprel B, Novoa RA, Ko J, Swetter SM, Blau HM, et al. Dermatologist-level classification of skin cancer with deep neural networks. Nature. 2017;542(7639):115–118. pmid:28117445
- 4. Nilashi M, Ibrahim O, Ahmadi H, Shahmoradi L. A knowledge-based system for breast cancer classification using fuzzy logic method. Telematics and Informatics. 2017;34(4):133–144.
- 5. Phan AV, Le Nguyen M, Bui LT. Feature weighting and SVM parameters optimization based on genetic algorithms for classification problems. Applied Intelligence. 2016; p. 1–15.
- 6. Pérez-Espinosa H, Avila-George H, Rodríguez-Jacobo J, Cruz-Mendoza HA, Martínez-Miranda J, Espinosa-Curiel IE. Tuning the Parameters of a Convolutional Artificial Neural Network by Using Covering Arrays. Research in Computing Science. 2016;121:69–81.
- 7. Salchenberger LM, Cinar E, Lash NA. Neural networks: A new tool for predicting thrift failures. Decision Sciences. 1992;23(4):899–916.
- 8. Ramchoun H, Amine M, Idrissi J, Ghanou Y, Ettaouil M. Multilayer Perceptron: Architecture Optimization and Training. International Journal of Interactive Multimedia and Artificial Intelligence. 2016;4(1):26–30.
- 9. Krogh A, Vedelsby J, et al. Neural network ensembles, cross validation, and active learning. Advances in neural information processing systems. 1995;7:231–238.
- 10. Sanger TD. Optimal unsupervised learning in a single-layer linear feedforward neural network. Neural networks. 1989;2(6):459–473.
- 11. Son JS, Lee DM, Kim IS, Choi SK. A study on genetic algorithm to select architecture of a optimal neural network in the hot rolling process. Journal of Materials Processing Technology. 2004;153:643–648.
- 12. Valdez F, Melin P, Castillo O. Modular neural networks architecture optimization with a new nature inspired method using a fuzzy combination of particle swarm optimization and genetic algorithms. Information Sciences. 2014;270:143–153.
- 13. Hecht-Nielsen R. Theory of the backpropagation neural network. Neural Networks. 1988;1(Supplement-1):445–448.
- 14.
Islam BU, Baharudin Z, Raza MQ, Nallagownden P. Optimization of neural network architecture using genetic algorithm for load forecasting. In: 2014 5th International Conference on Intelligent and Advanced Systems (ICIAS); 2014. p. 1–6.
- 15. Ghanou Y, Bencheikh G. Architecture Optimization and Training for the Multilayer Perceptron using Ant System. International journal of computer science. 2016;43(1):10 pages.
- 16. Ananthi J, Ranganathan V. Multilayer perceptron weight optimization using Bee swarm algorithm for mobility prediction. IIOAB Journal. 2016;7(9):47–63.
- 17.
Mustafa AS, Swamy YSK. Web service classification using multi-Layer perceptron optimized with Tabu search. In: Advance Computing Conference (IACC), 2015 IEEE International; 2015. p. 290–294.
- 18. Krawczak M, Sotirov S, Sotirova E. Modeling Parallel Optimization of the Early Stopping Method of Multilayer Perceptron. In: Recent Contributions in Intelligent Systems; 2017. p. 103–113.
- 19. Dawwd SA, Layla A, Noor M. Training Acceleration of Multi-Layer Perceptron using Multicore CPU and GPU under MATLAB Environment. Al-Rafadain Engineering Journal. 2015;23(3).
- 20.
Turchenko V, Bosilca G, Bouteiller A, Dongarra J. Efficient parallelization of batch pattern training algorithm on many-core and cluster architectures. In: IEEE 7th International Conference on Intelligent Data Acquisition and Advanced Computing Systems. vol. 2; 2013. p. 692–698.
- 21. Zhang Hj, Xiao Nf. Parallel implementation of multilayered neural networks based on Map-Reduce on cloud computing clusters. Soft Computing. 2016;20(4):1471–1483.
- 22.
Nestlé. Nestlé Responsible Sourcing Guideline; 2013. Available from: http://www.nestle.com/csv/rural-development-responsible-sourcing/responsible-sourcing.
- 23.
Helrich K, editor. AOAC: Official Methods of Analysis. vol. 1. 15th ed. Association of Official Analytical Chemists, Inc; 1990.
- 24. Mayorga N, Guzmán L, Unchupaico I. Evaluation of general features, physicochemical and microbiological milk produced in the experimental agricultural station Mantaro—UNCP. Convicciones. 2014;1(1):84–90.
- 25. Gómez Urrego JM, Correa Londoño G, Barahona Rosales R. Evaluation of the Agaricus bisporus Spent Compost as Feed of Dairy Cows in Mid Lactation. Revista Facultad Nacional de Agronomía, Medellín. 2014;67(2):7331–7343.
- 26.
Uria M, Lucas E. Current State of the Food Regulations in Peru and its comparison with the Regulations of the CODEX ALIMENTARIUS. Lima-Peru: FAO—DIGESA; 2003. RLA/2904.
- 27. Torrecilla JS, Aroca-Santos R, Cancilla JC, Matute G. Linear and non-linear modeling to identify vinegars in blends through spectroscopic data. LWT—Food Science and Technology. 2016;65:565–571.
- 28. Oblitas J, Castro W, Mayor-López L. Effect of different combinations of size and shape parameters in the percentage error of classification of structural elements in vegetal tissue of the pumpkin Cucurbita pepo L. using probabilistic neural networks. Revista Facultad de Ingeniería. 2016;78:30–37.
- 29. Benković M, Tušek AJ, Belščak-Cvitanović A, Lenart A, Domian E, Komes D, et al. Artificial neural network modelling of changes in physical and chemical properties of cocoa powder mixtures during agglomeration. LWT—Food Science and Technology. 2015;64(1):140–148.
- 30. Velasco-Forero S, Angulo J. Classification of hyperspectral images by tensor modeling and additive morphological decomposition. Pattern Recognition. 2013;46(2):566–577.
- 31. Avila-George H, Torres-Jimenez J, Rangel-Valdez N, Carrión A, Hernández V. Supercomputing and grid computing on the verification of covering arrays. The Journal of Supercomputing. 2012;62(2):916–945.
- 32. Brousett-Minaya M, Torres Jiménez A, Chambi Rodríguez A, Mamani Villalba B, Gutiérrez Samata H. Physiochemical, microbiological, and toxicologic quality of raw milk in dairy communities of the region of Puno. Scientia Agropecuaria. 2015;6(3):165–176.
- 33. Izquierdo C, Montenegro C. Comparative of Artificial Intelligence Techniques applied to forecasts. Visión Electrónica. 2015;8(2):55–66.
- 34. Mercado D, Caballero L, Martínez E. Comparison of Neural Networks applied to the prediction of Time Series. Prospectiva. 2015;13(2):88–95.
- 35. García I. Analysis and prediction of the time series of Colombian Coffee external price using artificial neural networks. Universitas Scientiarum. 2003;8:45–50.
- 36. Velásquez J, Fonnegra Y, Villa F. Pronóstico de series de tiempo con redes neuronales regularizadas y validación cruzada. Vínculos. 2013;10(1):267–279.
- 37. Gröger T, Zimmermann R. Application of parallel computing to speed up chemometrics for GC× GC–TOFMS based metabolic fingerprinting. Talanta. 2011;83(4):1289–1294. pmid:21215865