Modelling and Structural Analysis of Three-Dimensional Wing
Muhammad Amir Mirza Bin Mohd Zakuan1, Abdul Aabid2, Sher Afghan Khan3

1Muhammad Amir Mirza Bin Mohd Zakuan, Départment of Mechanical Engineering, Faculty of Engineering, International Islamic University of Malaysia, Gombak, Kuala Lumpur, Malaysia.
2Abdul Aabid, Départment of Mechanical Engineering, Faculty of Engineering, International Islamic University of Malaysia, Gombak, Kuala Lumpur, Malaysia.
3Sher Afghan Khan, Départment of Mechanical Engineering, Faculty of Engineering, International Islamic University of Malaysia, Gombak, Kuala Lumpur, Malaysia.
Manuscript received on September 23, 2019. | Revised Manuscript received on October 15, 2019. | Manuscript published on October 30, 2019. | PP: 6820-6828 | Volume-9 Issue-1, October 2019 | Retrieval Number: A2983109119/2019©BEIESP | DOI: 10.35940/ijeat.A2983.109119
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: This paper attempts to discover the structural behavior of the wing imperiled to flowing loads through the voyage. The study uses a method in the form of finite element analysis of wing flexure distortion. As a first step, two wing models are established by captivating factual features, wing assembly, and plan principles into consideration. The gathering wing prototypical entails of tinny membrane, two poles, and multi-ribs. Two spars which consist of primary and secondary spars. NACA 23015 is chosen as the baseline aerofoil as this is identical alike to the tailored aerofoil being castoff in Airbus A320. Two rods mostly endure the twisting moment and trim strength, which is finished of titanium contaminant to ensure enough inflexibility. The covering and wing spars are made of aluminum amalgam to lessen the structural heaviness. Later, a static structural investigation is smeared, and the overall distortion, comparable elastic strain, and corresponding Von-Mises tension are obtained to analyze the mechanical behavior of the wing. Furthermore, modal investigation is being supported out to determine the natural rate of recurrence, as well as the modal shape of the three orders, which are acquired through the pre-stress modal analysis. The outcomes of the modal scrutiny aid engineers decrease excitation on the natural occurrences and avert the wing from the flurry. In view of the results obtained from the study, designers can emphasize consolidation and analysis the stress attentiveness range and huge distortion area. In conclusion, the recreation consequences indicate that the arrangement is possible and improves the information grade of the lifting surface.
Keywords: Structural Behaviour, Wing, Deformation, Modal Analysis, Stress, Strain, ANSYS.