A Fuzzy Controlled SEPIC-ZETA Converter with Single Stage Operation for Application in Electric Vehicle
Sheba Kalapala1, C. Nagamani2, T. Anil Kumar3
1Sheba Kalapala Electrical and Electronics Engineering, Anurag Group of Institution, (Telangana) India.
2C. Nagamani , Professor ,Electrical and Electronics Engineering, Anurag Group of Institution, (Telangana) India.
3Dr.T.Anil Kumar, HOD, Electrical and Electronics Engineering, Anurag Group of Institution, (Telangana) India.
Manuscript received on September 23, 2019. | Revised Manuscript received on October 15, 2019. | Manuscript published on October 30, 2019. | PP: 6533-6538 | Volume-9 Issue-1, October 2019 | Retrieval Number: A1679109119/2019©BEIESP | DOI: 10.35940/ijeat.A6792.109119
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: In this paper a SEPIC-ZETA power factor correction converter is introduced with fuzzy control for better performance. The controller of the converter is updated with 49 rule base fuzzy interface system with 7 membership functions in each input variable. The novel proposed converter operating modes are observed with change in switching states. For application a three-phase induction machine with inverter is connected to the proposed circuit. The characteristics of the converter and the machine are studied using MATLAB Simulink environment.
Keywords: SEPIC-ZETA.