Performance and Implementation of Grid Connected Single Phase Photovoltaic System and FPGA-Design Based MPPT
B. Pragathi11, Deepak Kumar Nayak2, Polaiah Bojja3

1B. Pragathi, Research Scholar, Department of ECE, Koneru Lakshmaiah Education Foundation, Vaddeswaram, Guntur, India.
2Deepak Kumar Nayak, Associate Professor, Department of ECE, Koneru Lakshmaiah Education Foundation, Vaddeswaram,Guntur, India.
3Polaiah Bojja, Professor, Department of ECE, Koneru Lakshmaiah Education Foundation, Vaddeswaram, Guntur, India.
Manuscript received on September 03, 2019. | Revised Manuscript received on September 13, 2019. | Manuscript published on December 30, 2019. | PP: 5368-5376  | Volume-9 Issue-2, December, 2019. | Retrieval Number: B5149129219/2019©BEIESP | DOI: 10.35940/ijeat.B5149.129219
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Solar Photo Voltaic system are used for power generation by the process of photovoltaic effect. The solar power is varying continuously on a particular day due the variations in the temperature and irradiances. To overcome the power loss of PV system maximum power point tracking techniques are used to generate maximum solar power . Generally digital signal processors are used for implementing maximum power point tracking algorithms, but the performance is limited. The high degree of flexibility is achieved by the use of field-programmable gate arrays (FPGA) chips. The PV systems are used to provide stable and reliable power. The paper presents the single-phase implementation of the grid connected PV system and FPGS based P&O MPPT algorithm. The proposed system consists of P&O MPPT algorithm for maximum solar power extraction, bi-directional DC-DC converter for is used for controlling the battery. The solar power is used to serve the connected load and the excess power is used for serving grid utility. The single-phase inverter is used for DC-AC conversion. The Xilinx ISE is used for simulation of MPPT algorithm. The grid connected PV system is simulated using MATLAB SIMULINK.
Keywords: Solar PV system, DC Converter, Inverter, MPPT technique, FPGA.