Mechanical Investigation of S-Glass/Carbon Fibers Reinforced Epoxy Polymer Matrix Composites
Sandeep B1, K.S Keerthiprasad2, H.N. Divakar3, Savitha M4, Allwin Yesuvadian R5

1Sandeep B, Department of Mechanical Engineering, VVIET – VTU, Mysuru (Karnataka), India.
2Dr. K.S Keerthiprasad, Department of Mechanical Engineering, VVIET – VTU, Mysuru (Karnataka), India.
3Dr. H.N. Divakar, Department of Industrial & Production Engineering, NIE – VTU, Mysuru (Karnataka), India.
4Dr. Savitha M, Department of Industrial & Production Engineering, JSS STU, Mysuru (Karnataka), India.
5Allwin Yesuvadian R, Department of Mechanical Engineering, VVIET – VTU, Mysuru (Karnataka), India.
Manuscript received on 23 February 2023 | Revised Manuscript received on 28 February 2023 | Manuscript Accepted on 15 April 2023 | Manuscript published on 30 April 2023 | PP: 9-18 | Volume-12 Issue-4, April 2023 | Retrieval Number: 100.1/ijeat.D40510412423 | DOI: 10.35940/ijeat.D4051.0412423

Open Access | Editorial and Publishing Policies | Cite | Zenodo | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Fiber-based hybrid composite materials are used for variety of industrial purposes going on from automotive to many engineering fields such as structural, aerospace because of unique properties compared over conventional materials. Fiber based hybrid composites have greatly long-drawn-out o varying applications in today’s automotive industry reason behind is due their light weight, high strength, stiffness and ease of repair. This work aims to create a novel type of hybrid composite made by reinforcing S-glass (satin type) & carbon (twill form) in an epoxy matrix. Pure and hybrid composites are made by manual laying with 0° orientation of each fiber layer and the action has been tested with different combinations of each layer of S-glass and carbon and finally with a hybrid subjected to different mechanical stresses. The fiber matrix for the hybrid is created in a 50:50 ratio. Pure samples of fiberglass and carbon fiber-epoxy composites were compared to hybrid samples. The results showed that the hybrid samples outperformed the pure forms of the composite in mechanical tests, due to the presence of carbon fiber on the end faces of the sample, which offers the hybrid form’s superior mechanical properties. 
Keywords: Carbon, S-glass, Epoxy, Hybrid, Hand Layup.
Scope of the Article: Mechanical Design