Perovskite Solar Cell design using Tin Halide and Cuprous Thiocyanate for Enhanced Efficiency
Shiva Sharma1, Rajesh Mehra2

1Shiva Sharma*, Electronics and Communication Engineering department, National Institute of Technical Teacher’s Training and Research, Chandigarh, India.
2Rajesh Mehra, Curriculum Development Centre National Institute of Technical Teacher’s Training and Research, Chandigarh, India.
Manuscript received on July 20, 2019. | Revised Manuscript received on August 10, 2019. | Manuscript published on August 30, 2019. | PP: 2817-2825 | Volume-8 Issue-6, August 2019. | Retrieval Number: F8778088619/2019©BEIESP | DOI: 10.35940/ijeat.F8778.088619
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Utilization of Tin Halide as an absorber in Perovskite solar cells is immensely recognized as a substitute of lead halide absorber because of lead material’s toxicity. Also, Tin halide based Perovskites possess a potential for higher quantum efficiency because of their enhanced light absorption capability due to the wide-ranging absorption spectrum in the visible region with a comparatively lower bandgap of 1.3 eV than lead-based Perovskites. In the present work, glass/ transparent conductive oxide (TCO)/ titanium dioxide (buffer)/ tin halide Perovskite (Absorber)/ cuprous thiocyanate (HTM)/ Metal back solar cell structure has been designed and simulated by SCAPS software which yields Power Conversion Efficiency (PCE) of 28.32% and Fill Factor (FF) of 85.17%. The effect of total defect density, thickness, Valance Band Effective Density of States (VBEDS) and Conduction Band Effective Density of States (CBEDS) for an absorber layer has been analyzed. It has been observed that VBEDS variation has achieved PCE and FF to a significant extent i.e. up to 32.47% PCE and 85.86% FF.
Keywords: Recombination, Absorber, Solar Cell, Simulation.