Smart Cane for Blind People using Raspberry PI and Arduino
Prutha G1, Smitha B M2, Kruthi S3, Sahana D P4

1Prutha. G, Associate Professor, Department of EEE, Rajarajeswari College of Engineering, Bangalore.
2Smitha. B. M, Student, Department of EEE, Rajarajeswari College of Engineering, Bangalore.
3Kruthi. S, Student, Department of EEE, Rajarajeswari College of Engineering, Bangalore.
4Sahana. D. P, Student, Department of EEE, Rajarajeswari College of Engineering, Bangalore. 

Manuscript received on April 30, 2020. | Revised Manuscript received on May 06, 2020. | Manuscript published on May 30, 2020. | PP: 1520-1522 | Volume-9 Issue-1, May 2020. | Retrieval Number: A2498059120/2020©BEIESP | DOI: 10.35940/ijrte.A2498.059120
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: In this paper we are introducing a stick to guide blind people to move independently. It consists of raspberry pi and Arduino for monitoring the stick. Three pairs of ultrasonic sensors are used to detect obstacle in front of the users in the range of 15cm, and water sensors are used for water detection & puddles. The above sensors are interfaced in the stick. The stick can take robotic decision to move forward, backward, left and right as per obstruction detection using dc motor. Users will get alert from buzzer and vibration. Flashlight is interfaced on stick which can be noticed by others to let him pass way. Finger ring is used to give navigation using GPS. The user can maintain easily with fast response & low power consumption The main purpose of this paper is to help visually impaired people for navigating independently 
Keywords: Raspberry pi, Arduino, HC SR04 ultrasonic sensor, water sensor, L289N motor drive, dc motor, GPS.
Scope of the Article: Water Sensor