A New Technology for Dust Removal From Cotton Processing
Khodjiev Muksin1, Abbazov Ilkhom2, Karimov Javlon3

1Khodjiev Muksin, Professor of Guliston State University, Gulistan, Uzbekistan.
2Abbazov Ilkhom, PhD of Jizzakh Polytechnical Institute, Jizzakh, Uzbekistan.
3Karimov Javlon, Assistant of Guliston State University, Gulistan, Uzbekistan.

Manuscript received on 15 August 2019. | Revised Manuscript received on 25 August 2019. | Manuscript published on 30 September 2019. | PP: 583-586 | Volume-8 Issue-3 September 2019 | Retrieval Number: B2073078219/19©BEIESP | DOI: 10.35940/ijrte.B2073.098319
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: This article discusses the ways in which technology can be developed in the world. Scientific research is being carried out on a broad range of them to scientifically substantiate and improve them. It is justified on what needs to be considered. According to a study on dust collectors used in ginneries. The dust concentration is based on the relevance of today’s dust emissions to the atmospheric dust and the technology of fiber waste removal. To keep fibrous waste from dusty air content. It provides information on the operation mode of the equipment and its geometric parameters to create its technology. When selecting the parameters of the elastic waste disposal system, it is based on the width of the net surface hole, the number of turns of the grass and the length of the net surface. The results of the experiments to prevent aerodynamic resistance of airflow in the removal of fertile waste are given. These parameters, taken as an unwanted parameter, are selected to reduce the impact of dust transport on pneumatic parameters and technological processes. It is based on the obtained parameters that experiments are tested on the basis of test methods and their criteria.The main purpose of the experiment is to prevent loss of speed in the fiber optic clamp. Each experience has a schedule for planning. After each experiment, the total mass of the fibrous mass was detected and the amount of time spent. Improved performance of the enhanced device has been identified. On the basis of the obtained regression equations, the air velocity of the incoming pipe is affected by the width of the net surface of the device. Effects of the air flow in the inlet pipe on the number of rotations of the grass. Furthermore, the graphical results of the air velocity in the unwanted pipe are influenced by the effect of the fibrous waste disposal device on the surface of the net surface. Based on the findings, it is scientifically justified that the fishing gear is primarily due to the loss of fossil waste, ambient air pollution, and improved dust collector efficiency.
Index Terms:  Atmospheres, Dust Extinction, Fusible Wastes, Net Surfaces, Shrubs, Regressions,

Scope of the Article: Net Surfaces