Effect of Influence of Metakaolin and Shredded Plastic Waste on Strength and Durability Properties of M20 Grade Concrete
M. Sivaraj1, R. Sundararajan2, V. Karthik3 

1M. Sivaraj, Research Scholar, Department of Civil Engineering, Karpagam Academy of Higher Education, Coimbatore, India.
2Dr. R. Sundararajan, Supervisor, Department of Civil Engineering, Karpagam Academy of Higher Education, Coimbatore, India.
3Dr. V. Karthik, Professor, SRK Institute of Technology, Vijayawada, Andrapradesh, India.

Manuscript received on 06 March 2019 | Revised Manuscript received on 12 March 2019 | Manuscript published on 30 July 2019 | PP: 4170-4175 | Volume-8 Issue-2, July 2019 | Retrieval Number: B3242078219/19©BEIESP | DOI: 10.35940/ijrte.B3242.078219
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: The production of cement liberates the equal amount of CO2 into the environment. This will results in various social and environmental problems. There is a need in determining the new cement materials from waste or industrial waste. Second, the extraction of natural aggregates from natural resources poses other environmental problems. So in this article, the experimental programme is conducted to determine the strength and durability performance of cement partially replaced with Metakaolin (MK) (0%, 2.5%, 5%, 7.5% and 10%) and coarse aggregate substituted by shredded plastic waste (SPW) at 0.5% by weight. The main objective of this article was limited to analyzing the strength parameters along with the durability parameters.
Keywords: Metakaolin, Shredded Plastic Waste, Mechanical Strength and Durability Parameters

Scope of the Article: Mechanical Design