Hybrid Fuzzified-PID Controller for non-linear Control Surfaces for DC Motor to Improve the Efficiency of Electric Battery Driven Vehicles
Rashmi Bhardwaj1, Aashima Bangia2

1Correspondence Author Rashmi Bhardwaj*, Professor, Nonlinear Dynamics Research Lab, University School of Basic and Applied Sciences, Guru Gobind Singh Indraprastha University, Dwarka, New Delhi-110078, India.
2Aashima Bangia, Nonlinear Dynamics Research Lab, University School of Basic and Applied Sciences, Guru Gobind Singh Indraprastha University, Dwarka, New Delhi-110078, India.

Manuscript received on 9 August 2019. | Revised Manuscript received on 18 August 2019. | Manuscript published on 30 September 2019. | PP: 2561-2568 | Volume-8 Issue-3 September 2019 | Retrieval Number: C4766098319/2019©BEIESP | DOI: 10.35940/ijrte.C4766.098319
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: The paper intends to deliver a structure of speed-control for electric DC motor widely being used in the electric rechargeable-battery vehicles. Electric vehicles are the need of the hour due to increasing environmental concerns and the dependency on fuels and oils. So as to promote this hybrid and electric vehicle technology and ensure its sustenance, the Ministry of Heavy Industry and Public Enterprises in the Gazette of India on 13th of March, 2015 approved the Scheme for Faster adoption and manufacture of (Hybrid &) Electric Vehicle in India referred as FAME-India under National Electric Mobility Mission (NEMM). This scheme intends to encourage the hybrid/electric motor driven vehicles in the market and also its manufacturing for the betterment of eco-system to be implemented over a period of six years till 2020. Electric-battery driven vehicle is sourced on the restricted electrical-energy delivered by the battery in circuit. Major contribution of this work is to propose control-strategy through Fuzzified-PID controller so that the performances of the electric vehicle is comparable to that of an internal combustion-engine vehicle. Feedback is the foundation of PID control. The target or the set point is compared with the resultant of the process. Then, correction is computed and applied for the difference identified. This procedure is carried on till the time recalculation is required. PID refers to the combined computation of proportional-integral-derivative. Controllers, in general do not apply all three mathematical functions. Maximum processes were being handled through the proportional-integral-terms. However, addition of derivative control for fine control plus to avoid overshoot are required. Following models: PID controller, hybrid Fuzzified-reasoning PID controllers for linear surfaces and non-linear control surfaces using n-D Lookup-Table data have been designed for a comparative study. It has been observed that hybrid model designed for non-linear control-surfaces provided better speed response and have zero steady state error. The simulation of these models is carried out using SIMULINK under varying state conditions.
Keywords: Electric-motor, Fuzzified-PID Controller, Lookup-Table, SIMULINK

Scope of the Article:
Networked-Driven Multicourse Chips