A PV Array SEPIC Fed Single Phase Induction Motor Drives designed for Water Driving
Anjali Gupta1, Rishi Singhal2

1Anjali Gupta, Department of Electrical and Electronics Engineering, Noida Institute of Engineering and Technology.
2Rishi Singhal, Department of Electrical and Electronics Engineering, Noida Institute of Engineering and Technology.

Manuscript received on 6 August 2019. | Revised Manuscript received on 11 August 2019. | Manuscript published on 30 September 2019. | PP: 2526-2529 | Volume-8 Issue-3 September 2019 | Retrieval Number: C5339098319/2019©BEIESP | DOI: 10.35940/ijrte.C5339.098319
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: In this work a PV (Photo Voltaic) array SEPIC fed single phase induction machine for water driving is demonstrated. A SEPIC employed to maintain continuous DC link voltage through governing duty cycle. A single phase induction motor drives the centrifugal water pump which is served by the output of the single phase inverter. Constant V/F SPWM (Sinusoidal Pulse Width Modulation) controls the single phase inverter. The variable solar irradiation obtains the performance of the proposed system. The SIMSCAPE and Sim Power System tool boxes is preferred for the MATLAB/SIMULINK environment for the modelling of water pumping system. The result of the system is examined and verified with simulation.
Keywords- SEPIC, MATLAB, SIMULINK, SPWM, SIMSCAPE, Capacitor Start Induction Motor, THD.

Scope of the Article:
Bio-Science and Bio-Technology