An Effective IoT based Fuel and Cost Monitoring System
S. Rosaline1, J. Joselin Jeya Sheela2, M. Hasmitha3, Ch. Rajitha4

1S. Rosaline ,Electronics and Communiction Engineering, R.M.K. Engineering College, Chennai, India.
2J. Joselin Jeya Sheela , Electronics and Communiction Engineering, R.M.K. Engineering College, Chennai, India.
3M. Hasmitha, Electronics and Communiction Engineering, R.M.K. Engineering College, Chennai, India.
4Ch. Rajitha Electronics and Communiction Engineering, R.M.K. Engineering College, Chennai, India.

Manuscript received on 17 August 2019. | Revised Manuscript received on 22 August 2019. | Manuscript published on 30 September 2019. | PP: 4080-4083 | Volume-8 Issue-3 September 2019 | Retrieval Number: C5431098319/2019©BEIESP | DOI: 10.35940/ijrte.C5431.098319
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: As vehicles count increases day by day, the fuel consumption is also increasing. With this tremendous increase in fuel consumption, fuel price is also increasing rapidly. By taking this as an advantage, fuel bunkers are stealing fuel and this cannot be noticed by users because we have no control over the machine. A monitoring system is required to track the fuel level. So, we are proposing a system that helps to indicate the quantity of fuel for the amount we have paid. A petrol level sensor that receives real time information about tank’s fuel level is used which is directly connected to the Arduino mega. A webpage is created to get the petrol cost. The page provides the user with an Admin username and password. The petrol cost is updated only through that webpage. Once the petrol cost is updated, then the IOT module used to receive the petrol cost and transmit it to the Arduino mega. For enabling the cost displaying feature, we have to provide a signal to the controller indicating the need for displaying the petrol cost that is to be added. Now once the switch is in pressed state, the 2.4 TFT display is used to display the petrol cost and when the key is denounced, the cost is reset to zero.
Keywords: Petrol Level Sensor ,2.4 TFT Display, IOT, Arduino MEGA.

Scope of the Article:
Health Monitoring and Life Prediction of Structures