Steady State Simulation of Plastic Pyrolysis Process using Aspen Hysys V9 Simulator
Selvaganapathy.T1, Muthuvelayudham R2, Jeya Kumar M.3
1Selvaganapathy T*, Assistant Engineer, Tamilnadu, Pollution Control Board, Tamilnadu, India.
2Muthuvelayudham R, Professor, Annamalai University, Chidambaram, Tamilnadu India.

Manuscript received on November 15, 2019. | Revised Manuscript received on November 23, 2019. | Manuscript published on November 30, 2019. | PP: 2206-2211 | Volume-8 Issue-4, November 2019. | Retrieval Number: D7885118419/2019©BEIESP | DOI: 10.35940/ijrte.D7885.118419

Open Access | Ethics and Policies | Cite  | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: The present study was carrying out the simulation of plastic pyrolysis process modelled for the conversion of petroleum product from plastic wastes such as Poly-Styrene (PS), Poly-Ethylene (PE), Poly-Propylene (PP) and Poly-Styrene (PS) with the aid of Aspen Hysys V9 simulator. Aspen Hysys simulator was used to develop the steady state model and to simulate the pyrolysis process with the above mentioned plastic wastes. Peng-Robinson thermodynamics model was employed as a fluid package of this simulation. The process converts waste plastic to fuel, which was taking places in two stages in an Aspen Hysys Simulation Environment such as i) A conversion of plastic wastes into Vapour-Liquid Fraction (VLF) with small quantity of char residue using conversion reactor (Pyrolytic Reactor) and ii) Separation of produced Vapour-Liquid Fraction to pyro gases and liquid fuel with the help of water tube Condenser. The obtained results demonstrated that, a conversion of Poly-Styrene (PS) into liquid fuel is up to 88.7% was optimum than other plastics Poly-Ethylene (PE) 81.95% and Poly-Propylene (PP) 83.54 %. The simulated model can help an interested to researcher in knowing expected products and their individual component for better understanding and scale-up studies.
Keywords: Aspen Hysys V9simulator, Peng-Robinson, Pyrolysis process, Steady state model.
Scope of the Article: Digital Clone or Simulation.