Seismic Behavior of RC Buildings with Effect of Staircase and Elevator Core Wall
Aslam Hussain Hashmi1, B. Narender2
1Aslam Hussain Hashmi, Master’s Student, Structural Engineering, Anurag Group of Institutions (An Autonomous Institution), Venkatapur, Hyderabad, Telangana, India.
2Dr. B. Narender, Associate Professor, Structural Engineering, Anurag Group of Institutions (An Autonomous Institution), Venkatapur, Hyderabad, Telangana, India.

Manuscript received on November 10, 2019. | Revised Manuscript received on November 17, 2019. | Manuscript published on 30 November, 2019. | PP: 3821-3826 | Volume-8 Issue-4, November 2019. | Retrieval Number: D8181118419/2019©BEIESP | DOI: 10.35940/ijrte.D8181.118419

Open Access | Ethics and Policies | Cite  | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Staircase and elevator are the main structural components in multi-story buildings to enable access to different floor levels. In many Multi-storey buildings staircase and elevator core wall are located at different positions as per the benefits of structure plan and user. The position of the staircase and elevator core wall plays a vital role and changing the position of the stair case and core wall leads torsional irregularity in the plan regular building. The torsion in a building occurs because of eccentricity in the mass and stiffness distributions. The staircase and core wall is an integral part of the building, and its position may change the dynamic characteristic of regular plan building. In this paper, an attempt is made to understand the seismic behaviour of RC buildings with the effect of staircase and elevator core wall with changing position. Six models of 5 storey RC buildings with different positions of staircase and elevator core wall, i.e. ideal frame, Centre, Corner, Edge-Opposite, Edge-Adjacent and Corner with cantilever or balcony are considered. The modelling and analysis is done using ETABS v17. The response spectrum analysis and Modal analysis is performed, and Results of storey displacements, storey drift, storey shear, storey stiffness, base shear and torsion irregularity are discussed. From the results, it can be observed that building model with an edge-opposite position of staircase and elevator core wall performs better than other building model and torsion for it came within the code suggested ratio of 1.2.
Keywords: RC Building, Response Spectrum Analysis, Staircase and Elevator Core Wall, Torsional Effect.
Scope of the Article: Seismic Evaluation of Building Nonstructural Components.