Modified Alternator design for Automatic Voltage Regulation
Anupama Prakash1, Anurag Kumar2, Bhanu Pratap Singh3
1Anupama Prakash*,Department of Electrical and Electronics Engineering, Amity University Uttar Pradesh, India.
2Anurag Kumar, Department of Electrical Engineering, IIT Rohtak, India.
3Bhanu Pratap Singh, Department of Electrical and Electronics Engineering, Amity University Uttar Pradesh, India.

Manuscript received on November 12, 2019. | Revised Manuscript received on November 25, 2019. | Manuscript published on 30 November, 2019. | PP: 4658-4662 | Volume-8 Issue-4, November 2019. | Retrieval Number: D8394118419/2019©BEIESP | DOI: 10.35940/ijrte.D8394.118419

Open Access | Ethics and Policies | Cite  | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: For the proper operation of electrical equipment, it is important to have input voltage within permissible range (230V±5%). The input voltage supplied by the utility is generated by alternators. It is a well-known fact that the alternator terminal voltage decreases with an increase in load. In order to meet the consumer’s requirement, one needs to regulate the voltage of an alternator. This paper proposes the manner in which the design of the alternator can be modified to minimize the voltage regulation of an alternator.
Keywords: Alternator, Compensating Winding, Power Diode, Voltage Regulation.
Scope of the Article: Microstrip Antenna Design and Application.