Demand Re-Allocation in Conjunction with Feeder Input Power using Iterative Power Flows Method
M.S.N.G.Sarada Devi1, G. Yesuratnam2
1M.S.N.G.Sarada Devi, PhD scholar, Dep. of Electrical Engg Osmania University, Hyderabad.
2G.Yesuratnam , Professor, Dep. of Electrical Engg Osmania University, Hyderabad, Telangana, India.

Manuscript received on November 11, 2019. | Revised Manuscript received on November 20 2019. | Manuscript published on 30 November, 2019. | PP: 10436-10445 | Volume-8 Issue-4, November 2019. | Retrieval Number: D9128118419/2019©BEIESP | DOI: 10.35940/ijrte.D9128.118419

Open Access | Ethics and Policies | Cite  | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: The aim of this paper is to introduce the demand re-allocation process (demand estimation) in conjunction with feeder input complex power for Unbalanced Radial Distribution System (URDS) with mutual impedances using Iterative Power Flows (IPFS) method. The proposed method in this paper is to compute the individual loads on each phase in conjunction with the feeder telemetered complex power input and with the help of backward forward sweep power flow method calculate iteratively nodal voltages and total losses per phase on the feeder. The practical 8 bus and 55 bus unbalanced radial distribution systems with mutual impedances are used to describe the novelty of the proposed algorithm. The simulation results in terms of new individual demands, bus voltages and total per phase losses are summarized. The bus voltages with iterative power flows method are compared with direct approach power flow method results.
Keywords: Backward Forward Sweep, Iterative Power Flows Method, Demand Estimation.
Scope of the Article: Wireless Power Transmission.