Prediction of the Elastic Properties of the Clay-Rice Straw Composite by Numerical Homogenization Technique using Digimat
Christian Enagnon Adadja1, Clément Adéoumi Labintan2, Mohamed Gibigaye3, Hamid Zahrouni4, Mahdia Hattab5
1Clement Labintan*, Laboratory of Energetics and Applied Mechanics, University of Abomey-Calavi, Cotonou, Benin.
2Christian Adadja, Laboratory of Microstructure Studies and Mechanics of Materials, University of Lorraine, Metz, France.
3Mohamed Gibigaye, Laboratory of Energetics and Applied Mechanics, University of Abomey-Calavi, Cotonou, Benin.
4Hamid Zahrouni, Laboratory of Microstructure Studies and Mechanics of Materials, University of Lorraine, Metz, France.
5Mahdia HATTAB, Laboratory of Microstructure Studies and Mechanics of Materials, University of Lorraine, Metz, France. 

Manuscript received on November 19, 2019. | Revised Manuscript received on November 29 2019. | Manuscript published on 30 November, 2019. | PP: 9906-9910 | Volume-8 Issue-4, November 2019. | Retrieval Number: D9288118419/2019©BEIESP | DOI: 10.35940/ijrte.D9288.118419

Open Access | Ethics and Policies | Cite  | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: This paper deals with numerical modelling of the elastic properties of the rice straw-clay composite. This composite material is currently attracting interest because of its low impact on the environment but also for economic reasons. Benefiting from the advantages of a promising building material, straw reinforced composites attract more attention. This work allowed to model the effect of the straw inclusions on the elastic properties of the composite by a numerical approach considering the aspect ratio, the volume fraction, the orientation and the distribution of the straw inclusions. The Mori-Tanaka homogenization scheme for the RVEs is done using Digimat-MF software and the 3D composite microstructure models are generated by the Digimat-FE software. This made it possible to calculate the effective elastic properties of the clay-rice straw composites by numerical simulation. An empirical linear correlation between the volume fraction of the inclusions and the Young’s modulus has been proposed. The results obtained can help to better control the formulation of the composite in developing countries.
Keywords: Composite, Homogenization, Young’s Modulus, Digimat.
Scope of the Article: Properties and Mechanics of Concrete.