Measuring the Quality of Water using Ph Sensor and Filling Automatically Into Bottles
Aswin Kumer S V1, Sai Ram N L S P2, Pavan B3, Guru Sai Teja C4, Arun Kumar S5
1Aswin Kumer S V, Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Vaddeswaram, A.P., India.
2Sai Ram N L S P, Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Vaddeswaram, A.P., India.
3Pavan B,Undergraduate Student, Associate Professor, Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Vaddeswaram, A.P., India.
4Guru Sai Teja C,Undergraduate Student, Associate Professor, Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Vaddeswaram, A.P., India.
5Arun Kumar S,Undergraduate Student, Associate Professor, Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Vaddeswaram, A.P., India.

Manuscript received on November 15, 2019. | Revised Manuscript received on November 28, 2019. | Manuscript published on 30 November, 2019. | PP: 8865-8869 | Volume-8 Issue-4, November 2019. | Retrieval Number: D9483118419/2019©BEIESP | DOI: 10.35940/ijrte.D9483.118419

Open Access | Ethics and Policies | Cite  | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Automatic monitoring and regulation of the water quality allows for the design of the process. This technology uses the engine-based water motor ON / OFF remotely. This indicates the pH sensor and when it is at the water quality level is neutral than water pump is automatically filling the water; the pump is gradually triggered to refill the Bottle. Whenever the Bottle is filled to its maximum potential, the pump is contra-energized gradually. Many circuits were fitted together to ensure the right operation of this design and the diagram involves the power unit, the Arduino (micro-controller unit), the sensor system, the monitor unit and the motor drive device. The power unit is responsible for switching on the whole circuit. Some components are used to set up and include a power unit; a 12v step down transformer, a smoothing capacitor and an IC voltage regulator. The microcontroller (ATmega328) controls absolutely all of the actions carried out in this functionality. The sensor module is for detecting the water quality as well as transferring the Present position of the water to the microcontroller or Arduino. The Control device in the circuit is used to actually fire.
Keywords: Arduino Uno Microcontroller),pH sensor, Water motor, LCD, solenoid valve, Stepper motor.
Scope of the Article: Logic, Functional Programming and Microcontrollers for IoT.