Potential Effects of Microorganism to Reduce Building Defects in Malaysia
Monirul Islam1, Sarajul Fikri Mohamed2, Shogo Musbau Adeniyi3, Alghamdi Khalid Ahmed M4, Karban Abdullah Saeed5

1Monirul Islam, Department of Quantity Surveying, Faculty of Built Environment, University Teknologi Malaysia, Johor Bahru, Malaysia.
2Sarajul Fikri Mohamed, Department of Quantity Surveying, Faculty of Built Environment, University Teknologi Malaysia, Johor Bahru, Malaysia.
3Shogo Musbau Adeniyi, Department of Quantity Surveying, Faculty of Built Environment, University Teknologi Malaysia, Johor Bahru, Malaysia.
4Alghamdi Khalid Ahmed M, Umm Alqura University, College of Engineering and Islamic Architecture.
5Karban Abdullah Saeed, Umm Alqura University, College of Engineering and Islamic Architecture.
Manuscript received on January 02, 2020. | Revised Manuscript received on January 15, 2020. | Manuscript published on January 30, 2020. | PP: 9-16 | Volume-8 Issue-5, January 2020. | Retrieval Number: E4968018520/2020©BEIESP | DOI: 10.35940/ijrte.E4968.018520

Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Over the last few years, building defects is major concern in Malaysian construction industry. Design mistake or building flaw define as a defect which reduces building value and make a hazardous situation. A Building defect arises due to various reason, such as low handiwork or the use of adherent components, climatic construction, and faulty design. Building defects never emerge to have been minimized in contempt of new improvement in building technology. Defective building construction contributes both final cost of the product and cost of maintenance, which can be generous. By using effective microorganism (EM) in concrete building defects such as surface cracks, fatigue cracks and thermal contraction can be reduced significantly. Previous works in Japan and Malaysia found that effective in agriculture microorganism makes it possible increasing crop yields to twice or three times what they are at present to do so without the agricultural chemicals or artificial fertilizers, 5% of EM mixed into the concrete the tensile, compressive and flexural strength were 25.23%, 143.90% and 19.17% that are compared to design compressive strength that signify improve the concrete strength and durability. By using 25% EM in concrete the tensile strength was higher than the lower dosage. From the previous study, fermentation is the main notion in EMC in which the process will not produce detrimental texture. The research was carried out to investigate the potential usage of effective microorganism and its application in concrete that can help to reduce the building defects and improve building strength and durability. It was observed that most cost-effective and maximum percentage of EM mixed into the concrete is 5% in which enhancing its compressive, tensile and flexural strength.
Keywords: Effective Microorganism of Concrete (EMC), Crack, Defects, Cost, Effectiveness.
Scope of the Article: Building and Environmental Acoustics.