Smart Wastage Segregation using Arduino UNO
E. Malleswari1, S. Nanda Kishore2
1Miss. E. Malleswari, PG Scholar, Department of ECE, Kuppam engineering college, Andhra Pradesh, India.
2Dr. S. Nanda Kishore, Associate professor, Department of ECE, Kuppam engineering college, Andhra Pradesh, India.

Manuscript received on January 02, 2020. | Revised Manuscript received on January 15, 2020. | Manuscript published on January 30, 2020. | PP: 2074-2078 | Volume-8 Issue-5, January 2020. | Retrieval Number: E5734018520/2020©BEIESP | DOI: 10.35940/ijrte.E5734.018520

Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: The rates of waste generation in India are increasing with population and urbanization. For reducing pollution levels within the atmosphere it’s terribly helpful. The most aim of this project is to segregate the various forms of wastage from the rubbish. This technique uses metal detector and soil wetness detector to separate the metal waste, dry waste and wet waste from the waste within the mud bin. The complete mud passes through the belt. This method uses a metal detector to find the metal elements within the garbage. Once it detects the metal, the system can open the corresponding gate else it’ll open other gate. The soil wetness detector can find the presence of the dry waste or wet waste. The system encompasses a dc motors interfaced with the small controller that rotates the belt.
Keywords: Arduino UNO, ATmega328P microcontroller, CPU[Central process Unit], EEPROM, Metal detection sensor, Soil wetness detector, Servo motor, SRAM..
Scope of the Article: Environmental Engineering.