Design of Penta-Band Antenna for Concurrent Multiband Single Chain Radio Receiver
D. Lalitha Kumari1, S. Hemavardhan2
1Mrs.D. Lalitha Kumari, Assistant Professor, Department of Electronics and Communication Engineering, JNTUA College of Engineering (Autonomous) Ananthapuramu,, Andhra Pradesh.
2Mr.S. Hemavardhan, Department of Electronics and Communication Engineering, JNTUA College of Engineering (Autonomous) Ananthapuramu,, Andhra Pradesh.

Manuscript received on January 02, 2020. | Revised Manuscript received on January 15, 2020. | Manuscript published on January 30, 2020. | PP: 2587-2590 | Volume-8 Issue-5, January 2020. | Retrieval Number: E6387018520/2020©BEIESP | DOI: 10.35940/ijrte.E6387.018520

Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: In this paper, penta-band antenna is presented for concurrent, multiband, and single chain radio receivers. The antenna is manufactured on a 50 × 100 mm FR4 printed circuit board, and is able to provide five concurrent, operating bands covering a frequency range from 2 to 6 GHz. The antenna bandwidth can be increased up to 280 MHz. Using hexahedral mesh the slot antenna design we can achieve more accurate concurrent bands. These five bands are having larger bandwidth than conventional antennas. Using CM-FARAD (Concurrent Multiband Frequency Agile Radio) architecture we design the antenna for achieving concurrent multiband and single chain radio receiver. Using five slots we achieve our five concurrent bands that operate over wide bands which operate at 2.4,3.0,3,7,4.5,5.6 GHz respectively.
Keywords: Microstrip Feed, Slot Antenna, Hexahedral ,Concurrent, Multiband ,Single Chain.
Scope of the Article: Blockchain-enabled IoT Device and Data Security and Privacy.