Reduction of Current Harmonics by Cascaded Multilevel Inverter based Shunt Active Power Filters
R. Sheba Rani1, C. Srinivasa Rao2, M. Vijaya Kumar3
1R. Sheba Rani *, Assistant Professor EEE Department, G. Pullaiah College of Engineering and Technology, Kurnool, Andhra Pradesh, India.
2Dr. C. Srinivasa Rao *, Professor, EEE Department, G. Pullaiah College of Engineering and Technology, Kurnool, Andhra Pradesh, India.
3Dr. M. Vijaya Kumar, Professor, EEE Department, JNTUA, Ananthapuramu, Andhra Pradesh, India.

Manuscript received on January 05, 2020. | Revised Manuscript received on January 25, 2020. | Manuscript published on January 30, 2020. | PP: 4952-4961 | Volume-8 Issue-5, January 2020. | Retrieval Number: E6773018520/2020©BEIESP | DOI: 10.35940/ijrte.E6773.018520

Open Access | Ethics and Policies | Cite  | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Majority of loads in use today are power electronics based non-linear devices. Despite being compact and providing low energy consumption these loads generate inherent harmonics. Harmonics have several adverse effects such as interference with the communication lines, incorrect meter readings, increased losses, increased heating of electrical and sensitive electronic equipment. Sophisticated power electronic converter based filters named as Shunt Active Power Filters (SAPF) are widely being employed that provide superior harmonic filtering capabilities. Basic objective of SAPF is to generate or absorb currents that compensate harmonic currents produced by non- linear loads. These currents should be opposite in phase but have equivalent magnitude as that of harmonic currents. As compared to Diode-Clamped and Flying capacitor multilevel inverters, Cascaded multilevel configuration is employed for many applications due to ease of control and simple structure. In this research paper, power quality in a three-phase three- wire system is improved by reducing source side current harmonics produced by a non-linear load. Initially a three-level Cascaded multilevel inverter based SAPF is developed and its performance is analyzed by using advanced Adaptive Neuro Fuzzy Inference System (ANFIS) controller. DC link capacitor voltage and percentage Total Harmonic Distortion (%THD) in source currents is measured at PCC for balanced loading conditions and results are compared. In this paper, it is also proposed to incorporate multilevel inverter topology concepts by employing Five-Level and Seven-Level Cascaded Multilevel Inverters as VSI circuit for SAPF. Performance of these multilevel Shunt Active power filters is analyzed by ANFIS controller. Instantaneous Active-Reactive power theory is implemented to compute reference compensating currents for all Shunt Active power filter models. Phase Disposition type Pulse Width modulation is chosen for generating gate pulses for VSI circuits of all Cascaded multilevel inverter configurations. Three-level, Five-level and Seven-level Shunt active power filter models are developed and simulated using MATLAB/ Simulink and results are presented.
Keywords: Adaptive Neuro Fuzzy Inference System (ANFIS), Cascaded Multilevel Inverter (CMLI), Fuzzy inference system (FIS), Level Shifted Pulse Width Modulation (LSPWM), Percentage Total Harmonic Distortion (%THD), Phase Disposition PWM (PDPWM), Point of Common Coupling (PCC), Shunt Active Power Filter (SAPF).
Scope of the Article: Reasoning and inference.