Performance Measurement and Optimization of Relays Used for 5G Ultra Reliable Low Latency Communication Network
Saraju Prasad Padhy1, Madhusmita Panda2, Srinivas Seth3, Aruna Tripathy4
1Mr. Saraju Prasad Padhy*, Eastern Telecom Project, Bharat Sanchar Nigam Limited (BSNL), Gangtok, India.
2Mrs. Madhusmita Panda, Department of ECE -ITER, SOA University, Bhubaneswar, India.
3Dr. Srinivas Sethi, Department of Computer Science Engineering & Applications, Indira Gandhi Institute of Technology (IGIT), Sarang, India.
4Dr. Aruna Tripathy, Department of Instrumentation and Electronics College of Engineering and Technology ( CET), Bhubaneswar, India. 

Manuscript received on January 05, 2020. | Revised Manuscript received on January 25, 2020. | Manuscript published on January 30, 2020. | PP: 5017-5023 | Volume-8 Issue-5, January 2020. | Retrieval Number: E6899018520/2020©BEIESP | DOI: 10.35940/ijrte.E6899.018520

Open Access | Ethics and Policies | Cite  | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: The objective of this paper is to analyse and optimize the performance parameters of Relay nodes used in the finite block length (FBL) regime. A relaying system with a single Decode and Forward (DF) Relay is used for this purpose. Here using FBL, the performance parameters like coding rate, decoding error probability etc are obtained for different scenarios like without relay, with relay and using cooperative relaying. Effects of SNR and code Block length on performance parameters are analyzed. To enhance the performance of the Relay in URLLC scenario, power distribution between source and Relay node is optimized using evolutionary algorithms such as Multi-Objective Particle Swarm Optimization (MOPSO) and Infeasibility Driven Evolutionary Algorithm (IDEA). Low error probability and high throughput at the desired block length and power were the optimization goals. After using both the algorithms, the optimized Relay has shown improvement in performances like throughput (coding rate) and decoding error probability. It is also observed that IDEA optimization approach is found to be more efficient than MOPSO to provide optimum design parameters.
Keywords: Relays, URLLC, MOPSO, IDEA.
Scope of the Article: Measurement & Performance Analysis.