Design and Fabrication of Drawing Die for Fly Press
B. Joga Rao1, K. Sai Sudheer2, M. Sekhar3, K. Siva4, G. Eswar Naved5

1B. Joga Rao*, Associate Professor, Department of Mechanical Engineering, Godavari Institute of Engineering & Technology (A),Rajahmahendravaram, Andhra Pradesh, India.
2K. Sai Sudheer, UG Scholars, Department of Mechanical Engineering, Godavari Institute of Engineering & Technology (A), Rajahmahendravaram, Andhra Pradesh, India.
3M. Sekhar,UG Scholars, Department of Mechanical Engineering, Godavari Institute of Engineering & Technology (A), Rajahmahendravaram, Andhra Pradesh, India.
4K. Siva, UG Scholars, Department of Mechanical Engineering, Godavari Institute of Engineering & Technology (A), Rajahmahendravaram, Andhra Pradesh, India.
5G. Eswar Naved, UG Scholars, Department of Mechanical Engineering, Godavari Institute of Engineering & Technology (A), Rajahmahendravaram, Andhra Pradesh, India.

Manuscript received on April 06 2020. | Revised Manuscript received on April 15, 2020. | Manuscript published on May 30, 2020. | PP: 52-56 | Volume-9 Issue-1, May 2020. | Retrieval Number: F9510038620/2020©BEIESP | DOI: 10.35940/ijrte.F9510.059120
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Press working is defined as a non -chip removal manufacturing process by which various components are made from sheet metal. There are various types of components are produced from sheet metal operation. The main aim of this project is to “Design and fabrication of drawing die used in the fly press”. The design aspects of drawing die is accomplished in CATIA v5 and ansys 15.0 software. As coming to the manufacturing of drawing die, drawing die are manufactured in hot-chamber process which has the capacity to cast high melting point materials. The press tool leads to different operations namely blanking, drawing, trimming, bending, lancing, perforating, curling and shaving operations. Generally, drawing operation is the process of producing cylindrical objects. There is a vast use of press tools in industries like defense, textile, automobile, aircraft and food processing. The press machine is of the hand-operated fly press. 
Keywords:  CATIA, Press, Die, Design, Fabrication.
Scope of the Article: Microstrip Antenna Design and Application.