Combined Effects of Eccentricity and Internal Fins on the Shell and Tube Latent Heat Storage Systems
Ahmad K AL-Migdady1, Ali M Jawarneh2, Hussein N Dalgamoni3, Mohammad Tarwaneh4

1Ahmad K AL-Migdady, Assistant Professor, Department of Mechanical Engineering, Hashemite University, Zarqa, Jordan.
2Ali M Jawarneh, Associate Professor, Department of Mechanical Engineering, Hashemite University, Zarqa, Jordan.
3Hussein N Dalgamoni, Assistant Professor, Department of Mechanical Engineering, Hashemite University, Zarqa, Jordan.
4Mohammad Tarawneh, Associate Professor, Department of Mechanical Engineering, Hashemite University, Zarqa, Jordan.

Manuscript received on April 02, 2020. | Revised Manuscript received on April 15, 2020. | Manuscript published on May 30, 2020. | PP: 230-236 | Volume-9 Issue-1, May 2020. | Retrieval Number: F9537038620/2020©BEIESP | DOI: 10.35940/ijrte.F9537.059120
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: A numerical simulation study was performed on shell and tube configuration for latent heat storage applications where a Phase Change Material “PCM” – N-eicosane -was used to fill the shell side. The effects of smooth tube eccentricity from the shell center were investigated first, two values of eccentricity (ε=0.267, ε=0.533) were compared to the concentric case (ε=0). It was found out that increasing the eccentricity reduces the melting time by 5% and 10% for ε=0.267 and 0.533 respectively. Then the combined effects of eccentricity and attaching fins to the tube within the shell side were investigated for two fin types: straight rectangular fins and flipped triangular fins. The fin addition to the concentric tube reduced the melting time by about 36%, whereas combining the fins – of either type – to the tube of eccentricities of 0.267 and 0.533 reduced the melting by almost 41 % and 48% respectively, when compared to the smooth concentric tube case. 
Keywords: Phase Change material, shell and tube configuration, Eccentricity , Latent heat storage, fins.
Scope of the Article: Heat Transfer