Abstract
Statistical SPICE modeling is necessary for low risk IC design. Here existing approaches to statistical modeling are reviewed, and their limitations are discussed. A four level hierarchy of IC manufacturing variations is presented. Using physically based process and geometry level modeling, sensitivity analysis, and propagation of variance, it is shown how statistical models can be accurately and efficiently derived from the statistical distributions of key device electrical performances, as measured on manufacturing lines. The procedure runs in minutes of am engineering workstation, and guarantees accurate modeling of manufacturing variations.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
12. References
Chen, J. C., Hu, C., Liu, Z., and Ko, P. K. (1995) Realistic worst-case SPICE file extraction using BSIM3. Proc. IEEE CICC, 375–8.
Cox, P., Yang, P., Mahant-Shetti, S. S., and Chatterjee, P. (1985) Statistical modeling for efficient parametric yield estimation of MOS VLSI circuits. IEEE Trans. Electron Dev., ED-32, 471–8.
Davis, W. F. and Ida, R. T. (1989) Statistical IC simulation based on independent wafer extracted process parameters and experimental designs. Proc. IEEE BCTM, 262–5.
McAndrew, C. C., Bates, J., Ida, R. T., and Drennan, P. (1997) Efficient statistical BJT modeling, why * is more than Ic/Ib. Proc. IEEE BCTM.
Nagel, L. W. (1975) SPICE2: A computer program to simulate semiconductor circuits. Memo. no. ERL-520, Electronics Research Laboratory, University of California, Berkeley.
Nassif, S. R. (1994) Statistical worst-case analysis for integrated circuits, in Statistical Approach to VLSI (eds. S. W. Director, W. Maly, and A. Strowjas), North-Holland, 233–53.
Ogrodzki J., Opalski, L., and Styblinski, M. (1980) Acceptability regions for a class of linear networks. Proc. IEEE ISCAS, 187–90.
Papoulis, A. (1991) Probability, random variables, and stochastic processes, 3rd. edition. McGraw-Hill, New York.
Power, J. A., Donellan, B., Mathewson, A., and Lane, W. A. (1994) Relating statistical MOSFET model parameter variabilities to IC manufacturing process fluctuations enabling realistic worst-case design. IEEE Trans. Semicond. Manufact., 7, 306–18.
Power, J. A., Kelly, S., Griffith, E., Doyle, D., and O’Neill, M. (1997) Statistical modeling for 0.6µm BiCMOS technology. Proc. IEEE BCTM.
Prendergast, E. J. and Lloyd, P. (1985) A highly automated integrated modeling system; MECCA. Proc. IEEE CICC.
Rencher, M. and Salamina, N. (1989) Statistical bipolar circuit design using MSTAT. Proc. IEEE ICCAD.
Veeraraghavan, S. (1990) SSIM: a new charge-based MOSFET model. MCNC Circuit Simulation Workshop.
Vladimirescu, A. and Liu, S. (1980) The simulation of MOS integrated circuits using SPICE2. Memo. no. ERL-M80/7, Electronics Research Laboratory, University of California, Berkeley.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2004 Kluwer Academic Publishers
About this chapter
Cite this chapter
McAndrew, C.C. (2004). Efficient Statistical Modeling for Circuit Simulation. In: Reis, R., Jess, J.A.G. (eds) Design of System on a Chip. Springer, Boston, MA. https://doi.org/10.1007/1-4020-7929-X_4
Download citation
DOI: https://doi.org/10.1007/1-4020-7929-X_4
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4020-7928-3
Online ISBN: 978-1-4020-7929-0
eBook Packages: Springer Book Archive