Abstract
The manufacture of high performance grinding wheels is heavily dependent upon the selecting the correct abrasive grain in terms of cutting ability, fracturing ability and the shape of the grain that controls metal removal rate, dressing interval, coolant delivery to the wheel-workpiece interface and chip evacuation. This chapter explains the recent developments in abrasive grains and bonding systems and should allow the reader to better select the correct abrasive grain and bonding system to economically machine materials.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
De Pellegrin D.V., Corbin N.D., Baldoni G., Torrance A.A., Wear 253 (2002) 1016–1025.
De Pellegrin D.V., Corbin N.D., Baldoni G., Torrance A.A., Tribol. Int. 42(1) (2008) 160–168.
De Pellegrin D.V., Stachowiak G.W., Tribol. Int. 37 (2004) 255–270.
Diashape – World Wide Web, (2006), “Diashape Parameters, Innovative Sintering Technologies” http://www.istag.ch/diamonds/parameters.html.
Sysmex – World Wide Web, “FPIA-3000 Particle Analyzer – Parameters,” Sysmex (2006), http://www.particle.sysmex.co.jp/en/fpia/parameter.html.
Verspui M.A., van der Velden P., de With G., Slikkerveer P.J., Wear 199 (1996) 122–126.
Hamblin M.G., Stachowiak G.W., Tribol. Trans. 39(4) (1996) 803–810.
Kaye B.H., “Fractal description of fine particle systems,” in: J.C. Beddow (Ed.), Particle Characterization in Technology, Applications and Microanalysis, vol. 1, CRC Press, Boca Raton, FL (1984).
Swanson P.A., Vetter A.F., ASLE Trans. 28(2) (1984) 225–230.
Leavers V.F., IEEE Trans. Pattern Anal. Mach. Intell. 22(12) (2000) 1411–1423.
Roquefeuil F., Abras. Mag. December (2003) 24–29.
Komanduri R., Shaw M.C., “Attritious Wear of Silicon Carbide,” ASME Paper #75-WA/Prod-36 (1975).
Kugemai N., Kiyoshi K., Titanium Science & Technology, Proc. Fifth Intl. conf. on Titanium, September 10–14 (1984), Munich.
Hirosaki K., Shintani K., Kato H., Asakura F., Matsuo K., JSME Int. J. Ser. C 47(1) (2004) 14–20.
Kumar K.V., Fourth Intl Grinding Conf. SME, October 9–11 (1990), Detroit.
Hagiwara S., Obikawa T., Usui E., Trans. ASME 120 (1998) 708–714, J. Manufact. Sci. Eng.
Ishikawa T., Kumar K., “Conditioning of Vitrified Bond Superabrasive Wheels” Superabrasives’ 91 SME MR91–172 (1991).
Takagi J., Liu M., J. Mater. Process. Technol. 62 (1996) 397–402.
Jakobuss M., Webster J. Abras. Mag. August/September (1996) 23.
Fujimoto M., Ichida Y., Sato R., Morimoto Y., JSME Int. J. Ser. C 19(1) (2006) 106–113.
Yonekura M., Yokogawa K., Bull. JSPE 17(2) (1983) 113–118.
Mindek R., MSc Thesis (1992), Univ. Connecticut.
Acheson E.G., US Patent 492,767 (1893).
Cowles A.H., Cowles E.H., US Patent 319945 (1885).
Kern, E.L., Hamill, D.W., Deem, H.W., Sheets, H.D., Mater. Res. Bull. 4 (1969) S25–S32.
Kern, E.L., Hamil D.W., Deam H.W., Sheets, Mater. Res. Bull., Special Issue 4, 1969, S25–S32, Proceedings of the International Conference on Silicon Carbide, University Park, Pennsylvania, USA, October 20–23 (1968).
Nilsson O., Mehling H., Horn R., Fricke J., Hofmann R., Muller S.G., Eckstein R., Hofmann D., High Temp. High Press. 29 (1997), 73–79.
Tymeson M.M., “The Norton Story,” Norton Co., USA (1953).
Wikipedia “Bayer Process” Online Encyclopedia Reading, December 12 (2009).
Wolfe L.A., Lunghofer E.P., 13th Industrial Minerals International Congress, Kuala Lumpur, Malaysia, April 26–29 (1998).
Lunghofer E.P., Wolfe L.A., “Fused brown alumina production in China,” Posted: August 6 (2000), http://www.ceramicindustry.com/copyright/77d58fabca9c7010VgnVCM100000f932a8c0_...9/24/2009.
Whiting Equipment Canada Inc., “Metallurgical Equipment,” Commercial brochure (n.d.).
U.S.G.S. Geological Survey, Mineral Commodity Summaries, January (2009).
U.S.G.S. Geological Survey, Minerals Yearbook Abrasives, Manufactured (advance release) (2008).
Wellborn W.W., AES Mag. 31(1) (1991) 6–13.
Coes L., “Abrasives,” Springer-Verlag, Berlin (1971) p. 65.
Polch, US Patent 2769699, November (1956).
Robie N.P., US Patent 2877104, March 10 (1959).
Foot D.G., US Patent 3,175,8943/30 (1965).
Marshall D.W., US Patent 3181939 May 4 (1965).
Cichy P., US Patent 3,726,6214/10 (1973).
Richmond W.Q., Cichy P. US Patent 3,861,849, January 21 (1975).
Richmond W.Q., Cichy P. US Patent 3,928,515, December 23 (1975).
Sekigawa H., US Patent 3,977,132, August 31 (1976).
Ilmaier B., Zeiringer H., US Patent 4,059,417, November 22 (1977).
Cichy P., US Patent 4,061,699, December 6 (1977).
Ueltz H.F.G., US Patent 4,194,887, March 25 (1980).
Richmond W.Q., US Patent 4,415,510, November 15 (1983).
Richmond W.Q., US Patent 4,439,895, April 3 (1984).
Scott J.J., US Patent 3,993,119, November 23 (1976).
Scott J.J., US Patent 4,070,796, January 31 (1978).
Rowse R.A., Watson G.R., US Patent 3,891,408, June 24 (1975).
Bange D., Wood B., Erickson D., Abras. Mag. June/July (2001) 24–30.
Webster J.A., Tricard M., “Innovations in abrasive products for precision grinding,” CIRP Innovations in Abrasive Products for Precision Grinding Keynote STC G, August 23 (2004).
Bauer R. “Process for production of alpha alumina bodies by sintering seeded boehmite 2039 made from alumina hydrates,” US Statutory Invention Disclosure H000189, January 6 (1987).
Leitheiser M.A., Sowman H.G., US Patent 4,314,827, February 9 (1982).
Wood W.P., Monroe L.D., Conwell S.L., US Patent 4,881,951, November 21 (1989).
Bange D., Wood B., Erickson D., Abras. Mag. June/July (2001) 24–30.
Cottringer T.E., van de Merwe R.H., Bauer R., US Patent 4,623,364, November 18 (1986).
Schwebel M.G., US Patent 4,744,802, May 17 (1988).
Rue C.V., US Patent 4,543,107, September 24 (1985).
Pellow S.W., US Patent 5,090,968, February 25 (1992).
DiCorletto J., Conf. Precision Grinding & Finishing in the Global Economy, Oak Brook, IL, October 1–3 (2001).
Roffman R., Finer Point Mag. (2005) 26–30.
Cockburn C., National Geographic, March (2002) 2–3.
Trautman R., Griffin B.J., Scharf D., Sci. Am. 279(2) (1998) 82–87.
U.S. Geological Survey, Data Series 140 (2005).
Ladd R.“Manufacutured large single crystals” Finer Points – Wire Die Products and Applications (n.d.) 23–28.
Bailey M.W., Juchem H.O., “The advantages of CBN grinding: low cutting forces and 2064 improved workpiece integrity,” IDR Pt. 3 (1993) 83–89.
Woodbury R.S., “History of the Grinding Machine – A Historical Study in Tools and 2066 Precision Production,” Technology Press, Massachusetts Institute of Technology, USA (1959).
Bateman A.H., J. Soc. Arts (London), March 22 (1878) 362.
Grinding Data Book. Unicorn Abrasives, Stafford, England (1995).
Black J.T., Trans. ASME J. Eng. Ind. 101 (1979) 403.
Rowe G.W., Wetton A.G., J. Inst. Met. 97 (1969) 193.
Marshall E.R., Shaw M.C., Trans. ASME 74 (1952) 51.
Backer W.R., Marshall E.R., Shaw M.C., Trans. ASME 74 (1952) 61.
Merchant M.E., J. Appl. Phys. 16 (1945) 207.
Doyle E.D., Agahn R.L., Metall. Trans. B 6B (1975) 143.
Malkin S., Cook N.H., Trans. ASME J. Eng. Ind. 93 (1971) 1120.
Shonazaki T., Shigematu H., Bull. Jpn. Soc. Precision Eng. 2 (1966) 8.
Takenaka N., Proc. Int. Conf. on Manufact. Tech., Ann Arbor, MI, USA (1967) 617.
Okamura K., Nakajima K., Proc. Int. Conf. Grinding, Pittsburgh, USA (1972) 305.
Hahn R.S., Proc. Third. Int. Mach. Tool Des. and Res. Conf., UK, (1962) 129.
Doyle E.D., Dean S.K., Ann CIRP 29 (1980) 571.
Mulhearn T.O., Samuels T.O., Wear 6 (1963) 457.
Malkin S., Proc. Ninth North American Metalworking Research Conference, USA, Carnegie Press (1981) 235.
Malkin S., Proc. Third North American Metal Working Research Conference, USA, Carnegie Press (1975) 453.
Malkin S., Joseph S., Wear 32 (1975) 15.
Werner G., Doctoral Dissertation, Technische Hochschule Aachen (1971).
Malkin S., Ann. CIRP 29 (1979) 209.
Tarasov L., Am Soc. Met. 43 (1951) 1144.
Opitz H., Ernst W., Meyer H., Proc. Sixth Int. MTDR Conf., Manchester, England (1962) 155.
Reichenbach G.S., ASTME Paper no. MR67-594, USA (1967) 1.
Malkin S., Grinding Technology. Ellis Horwood, England (1989).
Krabacher E.J., Trans. ASME J. Eng. Ind. 81 (1959) 187.
Pattinson E., Chisholm A., Int. Conf. On Manufacturing Technology, ASTME (1967) 601.
Malkin S., Murray T., Proc. Fifth North American Metalworking Research Conference, S.M.E., USA (1977), p. 278.
Kannapan S., Malkin S., Trans. ASME J. Eng. Ind. 94 (1972) 833.
Grisbrook H., Hollier R.H., Varley P.G., Int. J. Prod. Res. 1 (1961–1962) 57.
Tonshoff H.K., Grabner T., Proc. Fifth Int. Conf. On Prod. Eng., Jap. Soc. of Precision Engrs., Tokyo (1984) 326.
Yoshikawa H., Int. Res. Prod. Eng. ASTME 23 (1963) 209.
Tarasov L.P., Int. Res. Prod. Eng. ASTME 21 (1963) 196.
Yoshikawa H., Sata T., Trans. ASME J. Eng. Ind. 85 (1963) 39.
Tsuwa H., Tech. Rep. of Osaka Univ., Japan 10 (1960) 733.
Tsuwa H., Tech. Rep. of Osaka Univ., Japan 11 (1961) 287.
Tsuwa H., Tech. Rep. of Osaka Univ., Japan 11 (1961) 299.
Tanaka Y., Ikawa N., Tech. Rep. of Osaka Univ., Japan 12 (1962) 345.
Geopert G.J., Williams J.L., Mech. Eng. 81 (1959) 69.
Tsuwa H., Trans. ASME J. Eng. Ind. 86 (1964) 371.
Lal G.K., Shaw M.C., Proc. Int. Grinding Conf., Pittsburgh, Pennsylvania, USA (1972) 107.
Eiss N.S., Trans. ASME J. Eng. Ind. 89 (1967) 463.
Bhattacharyya S.K., Grisbrook H., Moran H., Microtechnic 22 (1965) 114.
Mohun W., Trans. ASME J. Eng. Ind. 84 (1962) 431.
Tsuwa H., Yasui H., Proc. of the Int. Grinding Conf., Pittsburgh, Pennsylvania, USA (1972) p. 142.
Saito K., Kagiwada T., Bull. Jpn. Soc. of Precision Eng. 8 (1974) 125.
Stetiu G., Lal G.K., Wear 30 (1974) 229.
Trent E.M., Metal Cutting. 3rd Edition, Butterworth-Heinemann, London (1991), p. 113.
Marshall E.R., Shaw M.C., Trans. ASME 72 (1952) 51.
Grisbrook H., Prod. Eng., 37 (1960) 251–269 and 341–346.
Davis C.E., Rubenstein R., Int. J. Mach. Tool. Des. Res. 12 (1972) 165.
Rowe W.B., Chen X., Morgan M.N., Proc. 30th Int. Mach. Tool Des. and Res. Conf., Manchester, UK (1993) 195.
Rowe W.B., Chen X., Morgan M.N., Proc. 31st Int. Mach. Tool Des. And Res. Conf., Manchester, UK (1995) 415.
Lindsay R.P., Trans. ASME J. Eng. Ind. 92 (1970) 683.
Lindsay R.P., Hahn R.S., Proc. Fourth All India Mach. Tool Des. Res. Conf., Indian Institute of Technology, Madras, India, p. 537.
Lindsay R.P., Hahn R.S., Society of Manufacturing Engineers’ Technical Report no. MR71, USA (1971).
Coes L. Abrasives. Springer-Verlag, New York (1971), Chapter 14.
Graham W., Nee A.Y.C., Prod. Eng. (1974) 186.
Loladze T.N., Bockuchava G.V., The Wear of Diamonds and Diamond Wheels. Mashinostroneniye, Moscow, USSR (1967).
Tanaka Y., Ueguchi T., Ann. CIRP 19 (1971) 449.
Outwater J.O., Shaw M.C., Trans. ASME 74 (1972) 73.
Duwell E.J., Hong I.S., McDonald W.J., ASLE Trans. 12 (1969) 86.
Yossifon S., Rubenstein C., Trans. ASME J. Eng. Ind. 103 (1981) 144.
Komanduri R., Shaw M.C., Trans. ASME J. Eng. Ind. 98 (1976) 1125.
Konig W., Messer J., Ann. CIRP 30 (1981) 457.
Komanduri R., Ann. CIRP 25(1) (1976) 161.
Komanduri R., Shaw M.C., Proc. Third North American Metalworking Research Conference, USA (1975), p. 481.
Graham W., Voutsadopolous C.M., Int. J. Mach. Tool Des. Res. 18 (1978) 95.
Carniglia S.C., J. Am. Ceram. Soc. 55 (1972) 610.
Duckworth W., J. Am. Ceram. Soc. 36 (1953) 68.
Parmalee C.W., Morgan W.R., Ceram. Ind. 22 (1934) 146.
Ryskewitch E., J. Am. Ceram. Soc. 55 (1953) 610.
Fiero D.C., et al., IEEE Trans. Power App. Syst. 89 (1970) 680.
Knudsen F.P., J. Am. Ceram. Soc. 42 (1959) 376.
Koenig J.H., Bull. Am. Ceram. Soc. 19 (1940) 424.
Zoellner H., Sprechsaal 41 (1908) 71.
Sane S.C., Cook R.L., J. Am. Ceram. Soc. 34 (1951) 145.
Eitel W., Phys. Chem. Der Silic. Barth 2 (1941) 649.
Budnikov P.P., Technologie der Keramishen Erzeugnisse. V.E.B. Verlag, Berlin, (1958) p. 532.
Geller R.F., Am. Ceram. Soc. Bull. 12 (1933) 18.
Krause O., Keetman E., Sprechsaal 68 (1935) 177.
Grofcsik J., Proc. Eighth Conf. Silicate Ind., Budapest, Hungary (1965) 367.
Mattyasovsky-Zsolnay L., J. Amer. Ceram. Soc. 40 (1957) 299.
Weidman T., Sprechsaal 92 (1959) 2.
Kalnin I.C., et al., Bull. Am. Ceram. Soc. 47 (1968) 498.
Koch H., Ber. Deut. Keram. Ges. 47 (1970) 538.
Lach V., Intern. Ceram. 23 (1974) 27.
Winterling A., Ber. Deut. Keram. Ges. 38 (1961) 9.
Washaw S.I., Seider R., J. Am. Ceram. Soc. 50 (1967) 337.
Weyland J.D., MSc Thesis, University of Missouri, USA (1964).
Avgustinik A.I., Adamashvili I.P., Ceram. Abst. (1971) 98h.
Austin C.R., et al., J. Am. Ceram. Soc. 29 (1946) 341.
Batchelor R.W., Dinsdale A., Seventh International Ceramic Congress (1961), p. 31.
Allen C.J., Trans. Br. Ceram. Soc. 63 (1964) 13.
Pass D., German W.L., Ceramics 20 (1969) 15.
Weyl D., Ber. Deut. Keram. Ges. 36 (1959) 319.
Davidge R.W., Green T.J., J. Mater. Sci. 3 (1968) 629.
Krause O., Sprechsaal 70 (1937) 611.
Washaw S.I., Seider R., Ceramic Microstructures, in: R.M. Fulrath and J.A. Pask (Eds.), John Wiley and Sons, New York (1966), p. 559.
Ludas M., Proc. Sixth Conf. Silicate Ind., Budapest, Hungary (1961) p. 297.
Evans A.G., Linsner M., J. Am. Ceram. Soc. 56 (1973) 575.
Krause O., Sprechsaal 72 (1939) 611.
Krause O., Sprechsaal 75 (1942) 229.
Beech D., Norris A.W., Trans. J. Br. Ceram. Soc. 60 (1961) 556.
Dinsdale A., Wilkinson W.T., Trans. J. Br. Ceram. Soc. 65 (1966) 391.
Kirchoff G., et al., J. Mater. Sci. 17 (1982) 2809.
Oral M.S., et al., Trans. J. Br. Ceram. Soc. 82 (1983) 31.
Filonenko N.E., Lavrov J.V., Petrography of Artificial Abrasives. Mashgiz, Moscow, USSR (1958).
Guilleaume A., Ber. Deut. Keram. Ges. 11 (1930) 284.
Guilleaume A., Doctoral Dissertation, Technische Hochschule Berlin, Germany (1927).
Franz W., Doctoral Dissertation, Technische Hochschule Braunschweig, Germany (1936).
Reike R., Haeberle C., Ber. Deut. Keram. Ges. 24 (1934) 117.
Moser M., Microstructure of Ceramics. Akademiai Kiado, Budapest, Hungary (1980).
Hartline S.D., Ph.D. Thesis, Pennsylvania State University, USA (1975).
Barry T.I., et al., Trans. J. Br. Ceram. Soc. 79 (1980) 139.
Ogawa S., Okamoto T., Bull. Jpn. Soc. Precision Eng. 20 (1986) 264.
Tanaka T., et al., Bull. Jpn. Soc. Precision Eng. 19 (1985) 221.
Yang J., et al., Ceram. Int. 19 (1993) 87.
Kuznichenko A.N., et al., Steklo i Keramika 8 (1983) 22.
Jackson M.J., et al., J. Mater. Sci. Lett. 13 (1994) 1287.
Hondros E.D., Br. Ceram. Trans. J. 90 (1991) 139.
Moseley D., et al., Br. Ceram. Trans. J. 88 (1989) 41.
Beevers C.A., Ross M.A., Z. Kristallogr. 97 (1937) 59.
Harata M., Mater. Res. Bull. 6 (1971) 461.
Moser M., Microstructure of Ceramics. Akademiai Kiado, Budapest, Hungary (1971).
Winkler E.R., et al., J. Am. Ceram. Soc. 49 (1966) 634.
Deer W.A., et al., Rock-Forming Minerals, Vol. 5: Non-silicates, Longman, London (1962).
Moser M., Proc. Int. Conf. Grinding, Pittsburgh, Pennsylvania (1972), p. 91.
Moser M., Period Polytech. Chem. Eng. 21 (1977) 27.
Shilo A.E., et al., Sverkhtverdye Mater. 5 (1983) 5.
Royle J.D., Trans. J. Br. Ceram. Soc. 73 (1974) 291.
Schramm E., Hall F.P., J. Am. Ceram. Soc. 19 (1936) 159.
Bowen N.L., J. Am. Ceram. Soc. 26 (1943) 285.
Scott P.M., et al., J. Mater. Sci. 1 (1975) 1833.
Evens D., et al., India Rev. (1977) 306.
Shilo A.E., Malogolovets V.G., Khizhnyak G.I., Sverkhtverdye Materialy, (1983), Vol. 5, p. 5.
Hall F.P., Insley H., Phase Diagrams for Ceramists. Columbus Press, USA (1947).
Foster W.R., J. Am. Ceram. Soc. 34 (1951) 151.
N’Dala I., et al., Br. Ceram. Trans. J. 83 (1984) 105.
Deletta M., et al., Br. Ceram. Trans. J. 83 (1984) 108.
Shelton G.R., J. Ceram. Soc. 31 (1948) 39.
Dietzel A., Padurow N.N., Ber. Deut. Keram. Ges. 31 (1954) 7.
Schairer J.F., Bowen N.L., Am. J. Sci. 245 (1947) 193.
Comeforo J.E., et al., J. Am. Ceram. Soc. 31 (1948) 254.
Weiss A., et al., Proc. Int. Clay Conf., Tokyo, in: L. Heller (Ed.), Israel Universities Press, Jerusalem, Vol. 2, (1969) p.34.
Brindley G.W., Nakahira M., J. Am. Ceram. Soc. 42 (1959) 319.
Hyslop J.F., Rokksby H.P., Trans. Ceram. Soc. 42 (1928) 299.
Jay A.H., Trans. Br. Ceram. Soc. 38 (1939) 455.
Colegrave E.B., Rigby G.R., Trans. Br. Ceram. Soc., 51 (1952) 355.
Richardson H.M., Wilde F.G., Trans. Br. Ceram. Soc. 51 (1952) 387.
Mazumdar S., Mukherjee B., J. Am. Ceram. Soc. 66 (1983) 610.
Chauduri S.P., Trans. Indian Ceram. Soc. 36 (1977) 71.
McVay T.N., J. Am. Ceram. Soc. 19 (1936) 195.
Morey G.W., Bowen N.L., Am. J. Sci. 4(5) (1922) 1.
Klein A.A., Trans. Am. Ceram. Soc. 18 (1916) 377.
Parmalee C.W., Amberg C.R., J. Am. Ceram. Soc. 12 (1929) 699.
Lundin S.T., Studies on Triaxial Whiteware Bodies. Almqvist and Wiksell Publishers, Stockholm, Sweden (1959).
Shelton G.R., Meyer W.W., J. Am. Ceram. Soc. 21 (1938) 371.
Hermannson L., Carlsson R., Trans. J. Br. Ceram. Soc. (1978) 32.
Tuttle M.A., Cook R.L., J. Am. Ceram. Soc. 32 (1949) 279.
Storch W., et al., Ber. Deut. Keram. Ges. 61 (1984) 335.
Binns E., Sci. Ceram. 1 (1962) 315.
Ford W.F., White J., Trans. J. Br. Ceram. Soc. 50 (1951) 46.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer US
About this chapter
Cite this chapter
Jackson, M.J., Hitchiner, M.P. (2011). Abrasive Tools and Bonding Systems. In: Jackson, M., Davim, J. (eds) Machining with Abrasives. Springer, Boston, MA. https://doi.org/10.1007/978-1-4419-7302-3_1
Download citation
DOI: https://doi.org/10.1007/978-1-4419-7302-3_1
Published:
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4419-7301-6
Online ISBN: 978-1-4419-7302-3
eBook Packages: EngineeringEngineering (R0)