Abstract
Most developing countries seldom have possessed hazardous waste incinerators or decomposition technologies for treatment of hazardous waste such as PCB stockpiles, obsolete pesticides and other hazardous waste. For solving this issue, using cement kilns as a hazardous waste management option is gaining increasing favour around the world. The cement industry is an intensive energy consuming industry. Reusing the hazardous waste as the substitution of raw materials, fuel or gypsum during the cement manufacturing process provides an energy and material recovery which could be described as a great example of win–win situation. This chapter discusses the key aspects in hazardous waste management by cement kilns.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ahling B (1987) Alternative raw materials for the production of cement–are waste materials a resource. Paper prepared for CEMENTA AB, Sweden
Basel Convention (2010) Draft technical guidelines on co-processing of hazardous waste in cement kilns. http://www.basel.int/techmatters/index.html
Baxendale T (1990) Co-processing waste derived fuels help solve compliance problems and produce useable materials. Hazmat World 3(1):57–58
Blumenthal M (1992) The rationale for using whole tyres. Rock Prod 95(7):48–50
Canadian Portland Cement Association (1989) Resource recovery: the cement kiln solution. Report published by the canadian portland cement association, Canada
Chadbourne JF, Freeman HM (1988) Hazardous waste as fuel in cement kilns. In: Abbou R (ed) Hazardous waste: detection, control, treatment, Part B. Elsevier, New York, pp 1315–1324
Dawson B (1992) Emerging technologies for utilising waste in cement production. In: Proceedings of international conference on the role of cement kilns in waste management—KILNBURN’92, Brisbane, Australia, pp 109–115
Directive 2000/76/EC of the European Parliament and of the Council (2000) Council directive 2000/76/EC of the European parliament and of the council of 4 Dec 2000 on the incineration of waste. J Eur Communities, L 332/91. http://www.central2013.eu/fileadmin/user_upload/Downloads/Document_Centre/OP_Resources/Incineration_Directive_2000_76.pdf
FAO (1997) FAO pesticide disposal series 5—prevention and disposal of obsolete and unwanted pesticide stocks in Africa and the near east, Second consultation meeting. http://www.fao.org/ag/AGP/AGPP/Pesticid/Disposal/pdf/w3338e.pdf
Ferdo AM, Hawks RL (1990) Processing of multimedia waste in cement kilns. In: Proceedings of air and waste management association international specialty conference on waste combustion in boilers and industrial furnaces, Missouri, USA
Gabbard WD, Gossman D (1990) Hazardous waste fuels and the cement kiln. ASTM Stand News 18(9):38–41
Gossman D (1992) Reuse of petroleum and petrochemical waste in cement kilns. Environ Prog 11(1):1–6
Hazelwood D, Smith F, Gartner E (1982) Assessment of waste fuel use in cement kilns. United States Environmental Protection Agency, USA (Report No. EPA–600/2–82–103)
Herat S (1997) Protecting the environment from waste disposal: the cement kiln option. Environ Prot Eng 23:25–34
Huden GH (1989) Opportunities and constraints for hazardous waste disposal in developing countries. Paper presented at 2nd international symposium of Pacific basin consortium for hazardous waste, Singapore
Huhta RS (1985) Waste fuel survey report–II. Rock Prod 88(5):46–49
Huhta RS (1986) Another look at waste fuels. Rock Prod 89:55–59
Ishikawa Y, Noma Y, Mori Y, Sakai S (2007) Congener profiles of PCB and a proposed new set of indicator congeners. Chemosphere 67:1838–1851
Ishikawa Y, Noma Y, Yamamoto T, Mori Y, Sakai S (2007) PCB decomposition and formation in thermal treatment plant equipment. Chemosphere 67:1383–1393
Jones PH, Herat S (1992) Incineration of intractable wastes in cement kilns. In: Proceedings of 1st national hazardous and solid waste convention, Sydney, Australia, pp 181–188
Karstensen KH (2008) Formation, release and control of dioxins in cement kilns. Chemosphere 70:543–560
Karstensen KH, Kinh NK, Thang LB, Viet PH, Tuan ND, Toi DT, Hung NH, Quan TM, Hanh LD, Thang DH (2006) Environmental science and policy, vol 9, pp 577–586
Karstensen KH, Mubarak AM, Gunadasa HN, Wijagunasekara B, Ratnayake N, Alwis AD, Fernando J (2010) Test burn with PCB-oil in a local cement kiln in Sri Lanka. Chemosphere 78:717–723
Mantus EK (1992) All fired up. Report published by environmental toxicology international, Seattle, Washington
Marcil AG (1990) Cement kiln incineration of out–dated agricultural chemicals in Pakistan. Waste Mange Res 8(2):171–174
Milne DD, Clark AI, Perry R (1986) Acid tars: their production, treatment and disposal in the UK. Waste Manage Res 4(4):407–418
Mourighan RE (1992) An overview of the disposal of solid and hazardous wastes in cement kilns. Technical information document prepared by US environmental protection agency, Kansas, USA
Mullick AK, Aluwalia SC (1992) Utilisation of wastes in Indian cement industry. In: Proceedings of 1st international symposium on cement industry solutions to waste management, Alberta, Canada, pp 489–512
Nemerow NL, Agardy FJ, Sullivan P, Salvato JA (2009) Environmental engineering, sixth edition–environmental health and safety for municipal infrastructure, land use and planning, and industry. Wiley, Hoboken, NJ
Neumann E (1992) Energy alternatives—the substitution of fossil fuels in cement kilns. Int Cement Rev (May) pp 61–67
Neumann E, Duerr M, Kreft W (1990) The substitution of fossil fuels in cement kilns. World Cem 21(3):80–88
Obrist A, Lang T (1987) Incineration of sewage sludge in cement kilns. Paper presented at 1987 IEEE cement industry technical conference, California, USA, pp 369–380
Parker A (1987) Modern methods of treatment of contaminated land and waste disposal. Paper presented at international pollution abatement conference, Birmingham, UK
Serumgard JR, Bluementhal MH (1992) The use of scrap tyres in cement rotary kilns. In: Paper presented at proceedings of 1st international symposium on cement industry solutions to waste management, Alberta, Canada
SINTEF (2006) Formation and release of POPs in the cement industry, Second edition. In: World business council for sustainable development. Cement Sustainability Initiative. http://www.wbcsd.org/DocRoot/piF5rKj2ulwpFpYRMI8K/formation_release_pops_second_edition.pdf. Accessed 23 Jan 2006
Spiegel SJ, Pelis TK (1990) Regulations and practices for the disposal of spent potliner by the aluminium industry. J Metals 42:70–73
Stockholm Convention (2004) Article 5 and annex C of the stockholm convention on persistent organic pollutants. Available at http://www.pops.int/documents/meetings/bat_bep/2nd_session/egb2_followup/draftguide/1BArticle5andAnnexC.pdf
Tabery RS, Dangtran K (1990) Fluidised bed combustion of aluminium smelting waste. Environ Prog 9(1):61–67
The Portland Cement Association. http://www.cement.org/
UNEP/IOMC (2001) Thailand–PCDD/DF sampling and analysis program—report UNEP Chemicals, Geneva, Switzerland. http://www.chem.unep.ch/Pops/pdf/thdioxsamprog.pdf
UNESCAP (2000) State of the environment of Asia and the Pacific
Weber R (2007) Relevance of PCDD/PCDF formation for the evaluation of POPs destruction technologies—review on current status and assessment gaps. Chemosphere 67:S109–S117
Yan D, Karstensen KH, Huang Q, Wang Q, Cai M (2010) Coprocessing of industrial and hazardous wastes in cement kilns: a review of current status and future needs in China. Envi Eng Sci 27(1):37–45
Zimmerman L, Coles C (1992) The utilisation of processed waste by–products for cement manufacturing. In: Proceedings of 1st international symposium on cement industry solutions to waste management, Alberta, Canada, pp 533–545
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag London Limited
About this chapter
Cite this chapter
Ishikawa, Y., Herat, S. (2012). Use of Cement Kilns for Managing Hazardous Waste in Developing Countries. In: Karagiannidis, A. (eds) Waste to Energy. Green Energy and Technology. Springer, London. https://doi.org/10.1007/978-1-4471-2306-4_6
Download citation
DOI: https://doi.org/10.1007/978-1-4471-2306-4_6
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-2305-7
Online ISBN: 978-1-4471-2306-4
eBook Packages: EngineeringEngineering (R0)