Abstract
In mechatronic assemblies, future developments require smaller installation spaces and lead therefore to increasing demands on Mechatronic Integrated Devices (MID), e.g., for aerospace industry. Since thermoplastic substrates and conventional production techniques like Injection Molding cannot fulfill these demands, additive manufacturing of ceramics seems to be a promising approach. However, processes to integrate electrical conductors into the ceramic bodies still have to be developed. This paper provides first steps for solving this problem. First, ideas are systematically searched, evaluated by means of a SWOT analysis and elaborated into detailed concepts considering possible process chains. The most promising concepts are investigated experimentally focusing on (i) pouring molten conductor material and (ii) inserting conductor wires into capillaries located in the ceramic body as well as (iii) manufacturing of aluminum oxide-copper-composites by active metal brazing. This paper is a starting point for detailed studies of the most promising concept “pouring molten conductor material”.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Franke, J.: Räumliche elektronische Baugruppen (3D-MID). Hanser, Munich (2013)
Franke, J., Gausemeier, J., Goth, C., Dumitrescu, R.: MID-Studie 2011. Paderborn (2011)
Gebhardt, A.: Additive Fertigungsverfahren, 5th edn. Hanser, Munich (2016)
Hofmann, H., Spindler, J.: Werkstoffe in der Elektrotechnik. Hanser, Munich (2018)
Auerkari, P.: Mechanical and physical properties of engineering alumina ceramics. VTT Manufacturing Technology. Research Notes 1792. Espoo (1996)
Bergmann, W.: Werkstofftechnik 2, 4th edn. Hanser, Munich (2009)
Götze, E., Postler, K., Buschulte, S., Zanger, F., Schulze, V.: Limits of ceramics in the 3D-MID with additively produced aluminum substrate. In: 13th International Congress Molded Interconnect Devices (MID). Würzburg (2018)
Müller, H., et al.: Laser Based Patterning Process for Robust 3-Dimensional Interconnect Devices. IGF 488ZN Ladisk. Fürth (2014)
Stoll, T., Franke, J.: Electrical and mechanical qualification of selectively dispensed active brazes. In: 13th International Congress Molded Interconnect Devices. Würzburg (2018)
Bührig-Polaczek, A., Michaeli, W., Spur, G.: Handbuch Urformen. Hanser, Munich (2014)
Polianska, O., Bähr, R., Gutko, J.: Casting alloy properties in gravity die casting of thin aluminium components. In: Casting Plant Technology International, pp. 8–13. Düsseldorf (2012)
Heraeus Edelmetalle GmbH: Combilabor® Vakuum-Druck-Gießgerät CL-G77. Operating instructions. Hanau (o.J.)
LOT-TEK GmbH: APA 5. Technical Data Sheet. Erlangen (o.J.)
Acknowledgement
The authors thank the Ministry of Science, Research and Arts of the Federal State of Baden-Württemberg for the financial support of the project within the InnovationsCampus Mobilität der Zukunft.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Schubert, J., Rosen, M., Zanger, F. (2022). Concept Development and Validation of Manufacturing Processes for Integrating Current-Carrying Conductors in Ceramic Substrates. In: Behrens, BA., Brosius, A., Drossel, WG., Hintze, W., Ihlenfeldt, S., Nyhuis, P. (eds) Production at the Leading Edge of Technology. WGP 2021. Lecture Notes in Production Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-78424-9_38
Download citation
DOI: https://doi.org/10.1007/978-3-030-78424-9_38
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-78423-2
Online ISBN: 978-3-030-78424-9
eBook Packages: EngineeringEngineering (R0)