Abstract
Rock joint roughness characterization is often an important aspect of rock engineering projects. Various methods have been developed to describe the topography of the joint surface, for example Joint Roughness Coefficient (JRC) correlation charts or disc-clinometer measurements. The goal of this research is to evaluate the accuracy, precision and limits of Terrestrial Laser Scanning (TLS) for making remote measurements of large-scale rock joints. In order to find the most appropriate roughness parameterization method for TLS data and to analyse the capability of TLS for roughness estimation, experiments were made with a 20 × 30 cm joint sample. The sample was scanned with TLS and compared to reference measurements made with the Advanced TOpometric Sensor (ATOS) system. Analysis of two roughness parameterization methods, virtual compass and disc-clinometer, and angular threshold method, showed that the latter is less sensitive to noise. Comparative studies of ATOS and TLS roughness parameters indicate that the TLS can adequately quantify surface irregularities with a wavelength greater than 5 mm from a distance of 10 m.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Barton N, Choubey V (1977) The shear strength of rock joints in theory and practice. Rock Mech Rock Eng 10(1):1–54
Capture3D (2013) Atos I, configurations. Accessed Oct 2013, from http://www.capture3d.com/products-ATOSI-configuration.html
Fecker E, Rengers N (1971) Measurement of large scale roughness of rock planes by means of profilograph and geological compass. In: Proceedings symposium on rock fracture, Nancy, France
Grasselli G (2001) Shear strength of rock joints based on quantified surface description. École Polytechnique Fédérale de Lausanne. Lausanne, EPFL
Grasselli G, Egger P (2003) Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters. Int J Rock Mech Min Sci 40(1):25–40
Khoshelham K, Altundag D et al (2011) Influence of range measurement noise on roughness characterization of rock surfaces using terrestrial laser scanning. Int J Rock Mech Min Sci 48(8):1215–1223
Kregar K, Grigillo D, et al (2013) High precision target center determination from a point cloud. ISPRS workshop laser scanning 2013. Antalya, Turkey. ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, vol II-5/W2
Patton FD (1966) Multiple modes of shear failure in rock. 1st ISRM Congress. Lisbon, Portugal, International Society for Rock Mechanics, pp 509–513
Riegl (2013) Laser Scanner VZ-400, Datasheet. Accessed Oct 2013, from http://www.riegl.com/nc/products/terrestrial-scanning/produktdetail/product/scanner/5/
Sturzenegger M, Stead D (2009) Close-range terrestrial digital photogrammetry and terrestrial laser scanning for discontinuity characterization on rock cuts. Eng Geol 106(3–4):163–182
Tatone B, Grasselli G (2012) An investigation of discontinuity roughness scale dependency using high-resolution surface measurements. Rock Mech Rock Eng 1–25
Acknowledgements
The Slovenian National Building and Civil Engineering Institute kindly provided access to their ATOS measuring system and assisted in data acquisition.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Bitenc, M., Kieffer, D.S., Khoshelham, K., Vezočnik, R. (2015). Quantification of Rock Joint Roughness Using Terrestrial Laser Scanning. In: Lollino, G., et al. Engineering Geology for Society and Territory - Volume 6. Springer, Cham. https://doi.org/10.1007/978-3-319-09060-3_150
Download citation
DOI: https://doi.org/10.1007/978-3-319-09060-3_150
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-09059-7
Online ISBN: 978-3-319-09060-3
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)