Abstract
This chapter presents numerical simulations of water waves using the Finite Volume Method. Wave loads exerted on a truncated circular cylinder are calculated and compared to experimental data.
Mathematical model of two-phase incompressible flow is based on Navier–Stokes equations with Volume-Of-Fluid method for interface capturing. Waves are generated and absorbed using relaxation zones with prescribed potential flow solution. Potential flow and CFD solutions are blended implicitly within governing equations. The novel approach allows stable simulations at higher Courant–Friedrichs–Lewy numbers. The algorithm is described in detail and implemented within OpenFOAM/FOAM-extend in Naval Hydro pack.
The method is validated on two test cases, both regarding truncated circular cylinder. The first test case considers maximum regular wave loads with different frequencies and wave heights. The second test case simulates phase focused freak wave and its impact on the cylinder.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Boo SY (2006) Measurements of higher harmonic wave forces on a vertical truncated circular cylinder. Ocean Eng 33:219–233
Brackbill JU, Kothe DB, Zemach C (1992) A continuum method for modelling surface tension. J Comput Phys 100:335–354
Dommermuth DG, Yue DKP (1987) A high-order spectral method for the study of nonlinear gravity waves. J Fluid Mech 184:267–288
Higuera P, Lara JL, Losada IJ (2013) Realistic wave generation and active wave absorption for Navier-Stokes models: application to OpenFoam®;. Coast Eng 71:102–118
Higuera P, Lara JL, Losada IJ (2013) Simulating coastal engineering processes withOpenFoam®;. Coast Eng 71:119–134
Jacobsen NG, Fuhrman DR, Fredsøe J (2012) A wave generation toolbox for the open-source CFD library: OpenFoam®;. Int J Numer Methods Fluids 70(9):1073–1088
Jasak H (1996) Error analysis and estimation for the finite volume method with applications to fluid flows. PhD thesis, Imperial College of Science, Technology & Medicine
Kharif C, Pelinovksy E (2003) Physical mechanisms of the rogue wave phenomenon. Eur J Mech B/Fluids 22:603–634
Monroy C, Ducrozet G, Bonnefoy A, Babarit A, Ferrant P (2010) RANS simulations of a CALM buoy in regular and irregular seas using the SWENSE method. In: Proceedings of the twentieth (2010) international offshore and polar engineering conference, Beijing, 20–25 June 2010
Rusche H (2002) Computational fluid dynamics of dispersed two - phase flows at high phase fractions. PhD thesis, Imperial College of Science, Technology & Medicine
Ubbink O (1997) Numerical prediction of two fluid systems with sharp interfaces. PhD thesis, Imperial College of Science, Technology & Medicine
Ubbink O, Issa RI (1999) A method for capturing sharp fluid interfaces on arbitrary meshes. J Comput Phys 153:26–50
van Leer B (1977) Towards the ultimate conservative difference scheme. IV. A new approach to numerical convection. J Comput Phys 23:276–299
West BJ, Brueckner KA, Janda RS (1987) A new numerical method for surface hydrodynamics. J Geophys Res 92(C11):11803–11824
Zhao X (2010) Numerical simulation of extreme wave generation using VOF method. J Hydrodyn 22:466–477
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this chapter
Cite this chapter
Jasak, H., Vukčević, V., Gatin, I. (2015). Numerical Simulation of Wave Loading on Static Offshore Structures. In: Ferrer, E., Montlaur, A. (eds) CFD for Wind and Tidal Offshore Turbines. Springer Tracts in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-16202-7_9
Download citation
DOI: https://doi.org/10.1007/978-3-319-16202-7_9
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-16201-0
Online ISBN: 978-3-319-16202-7
eBook Packages: EngineeringEngineering (R0)