Abstract
Each year in the Carpathian Mountains and the Sudety Mountains snow avalanches cause a great number of accidents. Avalanches also threaten buildings and affect the environment. The latest studies in Poland aim to implement advanced snow avalanche hazard mapping procedures, which would allow the creation of complex cartographic products for the location of avalanche hazard areas. These preliminary studies showed that results of these procedures strongly depend on the quality of the input digital surface data. The main goal of this study is to investigate this problem in detail through comparison of different types of Digital Elevation Models (DEMs), putting stress on high resolution DEMs generated from airborne and terrestrial laser scanning, in the context of estimating potential avalanche release areas and making run-out calculations. Test sites in the Tatra Mountains in the Carpathians and in the Karkonosze Mountains in the Sudety Mountains were selected for this study. The analysis was performed using Swiss Rapid Mass Movements (RAMMS) model and modified script on delineation automated release area. The study recognized that not only quality but also resolution of a digital surface models influence the accuracy of release area and volume estimation, calculated topography parameters, location of avalanche track and other parameters calculated by dynamic models.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Axelsson P (2000) DEM generation from laser scanner data using adaptive TIN models. Int Arch Photogram Remote Sens 33/4B:203–210
Christen M, Bartelt P, Gruber U (2002) AVAL-1D: an avalanche dynamics program for the practice. Interpraevent 2002. Matsumoto - Japan. Congress publication 2:715–725
Christen M, Kowalski J, Bartelt P (2010a) RAMMS: Numerical simulation of dense snow avalanches in three-dimensional terrain. Cold Reg Sci Technol 63:1–14
Christen M, Bartelt P, Kowalski J (2010b) Back calculation of the In den Arelen avalanche with RAMMS: interpretation of model results. Ann Glaciol 51(54):161–168
Chrustek P (2005) Zastosowanie GIS w typologii obszarów potencjalnego występowania lawin śnieżnych na przykładzie rejonu Kasprowego Wierchu w Tatrach. MSc Thesis. Jagiellonian University, Kraków
Chrustek P, Wężyk P (2009) Using high resolution LiDAR data to estimate potential avalanche release areas on the example of polish mountain regions. In: Schweizer J, Van Herwijnen A (eds) International Snow Science Workshop. 27 Sep to 2 Oct 2009, Davos, Switzerland. Proceedings. Swiss Federal Institute for Forest, Snow and Landscape Research Birmensdorf
Chrustek P, Biskupič M (2010) Extreme snow avalanche events in Tatra Mountains. In: Ostapowicz K, Kozak J (eds) Conference proceedings of the 1st forum carpaticum, integrating nature and society towards sustainability, Cracow, Institute of Geography and Spatial Management, Jagiellonian University, Kraków
Deems J, Painter T (2006) Lidar measurement of snow depth: Accuracy and error sources. In: proceedings of the international snow science workshop, 1–6 October 2006, Telluride, CO, USA
Gruber U (2001) Using GIS for avalanche hazard mapping in Switzerland. In: proceedings of the 2001 ESRI international user conference, July 9–13, 2001, San Diego, USA
Gruber U, Bartelt P (2007) Snow avalanche hazard modelling of large areas using shallow water numerical methods and GIS. Environ Model Softw 22(10):1472–1481
Gruber U, Maggioni M, Stoffel A (2002) Definition and characterization of potential avalanche release areas. In: Proceedings of the 22nd ESRI international user conference, October 15, 2002, San Diego, USA
Gruber U, Margreth S (2001) Winter 1999: a valuable test of the avalanche-hazard mapping procedure in Switzerland. Ann Glaciol 32:328–332
Heritage GL, Large ARG (2009) Laser scanning for the environmental sciences. Blackwell Publishing ltd, West Sussex
Jamieson B, Margreth S, Jones A (2008) Application and limitations of dynamic models for snow avalanche hazard mapping. In: Proceedings of the ISSW 2008, Whistler, Canada
Jörg P, Fromm R, Sailer R, Schaffhauser A (2006) Measuring snow depth with a terrestrial laser ranging system. In: proceedings of the international snow science workshop, 1–6 October 2006, Telluride, CO, USA
Maggioni M (2005): Avalanche release areas and their influence on uncertainty in avalanche hazard mapping. PhD Thesis, Department of Geography, University of Zurich UZH, Switzerland
Maggioni M, Gruber U (2003) The influence of topographic parameters on avalanche release dimension and frequency. Cold Reg Sci Technol 37:407–419
McCollister CH, Comey R (2009) Using LiDAR (light distancing and ranging) data to more accurately describe avalanche terrain. In: Schweizer J, Van Herwijnen A (eds) international snow science workshop. 27 Sep to 2 Oct 2009, Davos, Switzerland. Proceedings. Swiss federal institute for forest, snow and landscape research, birmensdorf
Pagliardi M, Barbolini M, Corradeghini P, Ferro F (2009) Identification of areas potentially affected by extreme snow avalanche combining expert rules, flow-routing algorithms and statistical analysis. In: Schweizer J, Van Herwijnen A (eds) International snow science workshop. 27 Sep to 2 Oct 2009, Davos, Switzerland. Proceedings. Swiss Federal Institute for Forest, Snow and Landscape Research, Birmensdorf
Perla R, Cheng TT, McClung D (1980) A two-parameter model of snow-avalanche motion. J Glaciol 26(94):197–207
Prokop A, Schirmer M, Rub M, Lehning M, Stocker M (2008) A comparison of measurement methods: terrestrial laser scanning, tachymetry and snow probing for the determination of the spatial snow-depth distribution on slopes. Ann Glaciol 49:210–216
Reiss R, Thomas M (1997) Statistical analysis of extreme values. Birkhäuser Verlag, Basel
Riegl (2010) Data sheet of the LPM-321 http://www.riegl.com/uploads/tx_pxpriegldownloads/ 10_DataSheet_LPM-321_18-03-2010.pdf. Accessed 20 October 2010
Salm B (2004) A short and personal history of snow avalanche dynamics. Cold Reg Sci Technol 39(2–3):83–92
Salm A, Burkard A, Gubler HU (1990) Berechnung von Fliesslawinen eine Anleitung für Praktiker mit Beispielen. Eidgenössisches Institut für Schnee und Lawinenforschung Technical Report 47, Davos
Sampl P, Zwinger T (2004) Avalanche simulation with SAMOS. Ann Glaciol 38:393–398
Sauermoser S, Illmer D (2002) The use of different avalanche calculation models practical experiences. In: International congress Interpraevent, Matsumoto, Japan
Shan J, Toth CK (ed) (2008) Topographic laser ranging and scanning. Principles and Processing, Taylor & Francis Group, Boca Raton
Vallet J, Skaloud J, Koelbl O, Merminod B (2000) Development of a helicopter-based integrated system for avalanche mapping and hazard management. Int Arch Photogramm Remote Sens Spatial Inf Sci 33:565–572
Vallet J (2008) High precision LiDAR mapping for complex mountain topography. In: Hurni L, Kriz K (eds) Proceedings of the 6th ICA mountain cartography workshop 11–15 February 2008, Zurich, Switzerland
Voellmy A (1955) Ueber die Zerstörungskraft von Lawinen. Schweiz Bauztg 73:159–285
VRMesh (2010) http://www.vrmesh.com/. Accessed 14 October 2010
Wężyk P, Borowiec N, Szombara S, Wańczyk R (2008) Generation of digital surface and terrain models in Tatra based on point cloud from airbone laser scanning (ALS). Archive of photogrammetry, Cartography and remote sensing. ISBN 978-83-61576-08-2, Szczecin, 18b, 651–661
Wężyk P (2006) Introduction to the laser scanning technology in forestry. Annals of Geomatics 4:119–132
Acknowledgments
We would like to express our gratitude to the Foundation for Polish Science for financial support of Paweł Chrustek. Performing analyses was possible mainly thanks to the VENTURES program organized by the Foundation of Polish Science and co-funded by the European Regional Development Fund under the Operational Program Innovative Economy 2007–2013. We would also like to thank to the Anna Pasek Foundation for additional financial support. Natalia Kolecka is a grant holder of “Doctus” Programme. We would like to also thank the Karkonosze National Park, ProGea Consulting Company and Kraków Branch of the Institute of Meteorology and Water Management (IMGW) for deriving the Geodata (ALS, GIS, Meteo data), Andrzej Brzeziński and Jakub Radliński from the Mountain Rescue Services (GOPR), for assistance in collecting data and materials concerning avalanches in the Karkonosze Mountains and Marek Świerk from the Anna Pasek Foundation in Poland, for assistance in collecting field data.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Chrustek, P., Wężyk, P., Kolecka, N., Biskupič, M., Bühler, Y., Christen, M. (2013). Using High Resolution LiDAR Data for Snow Avalanche Hazard Mapping. In: Kozak, J., Ostapowicz, K., Bytnerowicz, A., Wyżga, B. (eds) The Carpathians: Integrating Nature and Society Towards Sustainability. Environmental Science and Engineering(). Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-12725-0_42
Download citation
DOI: https://doi.org/10.1007/978-3-642-12725-0_42
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-12724-3
Online ISBN: 978-3-642-12725-0
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)