Abstract
Rough terrain control optimization for space rovers has become a popular and challenging research field. Improvements can be achieved concerning power consumption, reducing the risk of wheels digging in and increasing ability of overcoming obstacles.In this paper, we propose a terrain profiling and wheel speed adjustment approach based on terrain shape estimation. This terrain estimation is performed using sensor data limited to IMU, motor encoders and suspension bogie angles. Markov Localization was also implemented in order to accurately keep track of the rover position.Tests were conducted in and outdoors in low and high friction environments. Our control approach showed promising results in high friction environment: the profiled terrain was reconstructed well and, due to wheel speed control, wheel slippage could be also decreased. In the low friction sandy test bed however, terrain profiling still worked reasonably well, but uncertainties like wheel slip were too large for a significant control performance improvement.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
K. Iagnemma, S. Dubowsky, Mobile Robot rough-terrain control (RTC) for planetary exploration. in Proceedings of the 26th ASME Biennal Mechanisms and Robotics Conference, DETC (2000)
K. Iagnemma, H. Shibley, S. Dubowsky, On-line terrain parameter estimation for planetary rovers. in IEEE International Conference on Robotics and Automation, Washington D.C., USA (2002)
P. Lamon, A. Krebs, M. Lauria, S. Shooter, R. Siegwart, Wheel torque control for a rough terrain rover, in IEEE International Conference on Robotics and Automation, New Orleans, USA (2004)
P. Lamon, R. Siegwart, Wheel torque control in rough terrain-Modeling and simulation, in IEEE International Conference on Robotics and Automation (ICRA), Barcelona, Spain (2005)
M. Lauria, Y. Piguet, R. Siegwart, Octopus—An autonomous wheeled climbing Robot, in Proceedings of the Fifth International Conferance on Climbing and Walking Robots (2002)
R. Siegwart, P. Lamon, T. Estier, M. Lauria, R. Piguet, Innovative design for wheeled locomotion in rough terrain. J Robot. Auton. Syst. Elsevier 40(2–3), 151–162
T. Thueer, P. Lamon, A. Krebs, R. Siegwart, CRAB—Exploration rover with advanced obstacle negotiation capabilities. in 9th ESA Workshop on Advanced Space Technologies for Robotics and Automation (ASTRA), Noordwijk, The Netherlands (2006)
A. Krebs, F. Risch, T. Thueer, J. Maye, C. Pradalier, R. Siegwart, Rover control based on an optimal torque distribution—Application to 6 motorized wheels passive rover. in IEEE/RSJ International Conference on Intelligent Robots and Systems(IROS), Taipei, Taiwan (2010)
P. Strupler, Control Optimization for Space Rovers Using Suspension Angles (Master Thesis, ETH Zürich, Switzerland, 2010)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Strupler, P., Pradalier, C., Siegwart, R. (2014). Terrain Mapping and Control Optimization for a 6-Wheel Rover with Passive Suspension. In: Yoshida, K., Tadokoro, S. (eds) Field and Service Robotics. Springer Tracts in Advanced Robotics, vol 92. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-40686-7_20
Download citation
DOI: https://doi.org/10.1007/978-3-642-40686-7_20
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-40685-0
Online ISBN: 978-3-642-40686-7
eBook Packages: EngineeringEngineering (R0)