Summary
The paper records and interprets a series of tests on 316 stainless steel at 600°C which seek to investigate the interaction of short term plastic deformation and subsequent creep deformation. Strain controlled tests have been used to determine the influence of strain range, the number of cycles and the dwell period. The implications for structural behaviour and the prediction of stress relaxation are discussed.
Some of the tests have been extended to failure of the specimen and examined by optical and scanning microscopy. The failure modes are described and failure times are compared with corresponding behaviour under monotonic loading.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
AINSWORTH R.A. 1979 Int.J. solids Struct. 12, 981
ASHBY M.F. and RAJ M. 1975 Proc. Conference on the Mechanics and Physics of Fracture, the Institute of Physics and the Metals Society, Paper 16, Cambridge
ASME CODE CASE N-47 1977 ASME, New York
BREE, J. 1967 J.Strain Anal. 2, 226
CHABOCHE J.L., DANG VAN K. and CORDIER G 1979 Proc.Conf. on Structural Mechanics in Reactor Technology, Paper Lll/3, Berlin
CHRZANOWSKI M. 1976 Int.J.Mech.Sci. 18, 69
DYSON B.F. and MEAN D. 1977 Metals Science, 11, 37
FREDERICK C.O. and ARMSTRONG P.J. 1966a J. Strain Anal. 1, 154.
FREDERICK C.O. and ARMSTRONG P.J. 1966b CEGB Report RD/B/N73l
GOODALL I. W., LECKIE F.A., PONTER A.R.S. and TOWNLEY C.H.A. 1979 J. Engng. Materials and Technology, ASME, 101, 349
HALES R. 1979 CEGB Report RD/B/N46l8
LECKIE F.A. and HAYHURST D.R. 1977 Acta.Met. 9, 1059
MANSON S.S., HALFORD G.R. and NACHTIGALL A.J. 1975 Proc. of 2nd National Congress on Pressure Vessels and Piping, San Francisco, 17.
MEGAHED M.M. and PONTER A.R.S. 1979 Univ. of Leicester Department of Engineering Report 79–9.
MROZ Z. and LIND N.C. 1975 Acta. Mechanica 22, 131.
TOMKINS B. 1968 Phil.Mag. 18, 1041
YAMAMOTO A., KANO T. and YOSHITOSHI A. 1976 Elevated Temperature Design Symposium, ASME.
MIN, B.K. and RAJ, R. 1979, Canadian Metallurgical Quarterly, Vol. 18, No. 2, P. 171.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1981 Springer-Verlag, Berlin, Heidelberg
About this paper
Cite this paper
Goodall, I.W., Hales, R., Walters, D.J. (1981). On Constitutive Relations and Failure Criteria of an Austenitic Steel under Cyclic Loading at Elevated Temperature. In: Ponter, A.R.S., Hayhurst, D.R. (eds) Creep in Structures. International Union of Theoretical and Applied Mechanics. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-81598-0_6
Download citation
DOI: https://doi.org/10.1007/978-3-642-81598-0_6
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-81600-0
Online ISBN: 978-3-642-81598-0
eBook Packages: Springer Book Archive