Summary
The paper gives a survey of closed-loop control algorithms developed in the course of the project “very advanced industrial robots”. In line with the original objectives, a modular system of efficient algorithms has been obtained, which can be adapted with low effort to a wide manifold of existing and future manipulation problems, robot configurations and hardware components (servo and sensor systems). The basic approach to the design of a joint control algorithm which is tailored for a special manipulation problem will be provided by the inverse system principle. Because it warrants both the joint decoupling and a global system linearization, the option is obtained of introducing a controller separately for each joint which optimally tatisfies special performance requirements (e. g. time optimality, no overshoot) and hardware conditions. The efficiency of the developed algorithms for typical classes of manipulation problems will be demonstrated by investigations and practical case studies carried through at the Fraunhofer-Institute IITB.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literatur
Steusloff, H. (ed.): Wege zu sehr fortgeschrittenen Handhabungssystemen. Fachberichte Messen-Steuern-Regeln, Bd. 4, Springer-Verlag Berlin, Heidelberg, New York (1980).
Kuntze, H.-B.: Stand und Entwicklungstendenzen des Projektes “Sehr fortgeschrittene Handhabungssysteme”. FhG-Berichte (1981) No. 1/2, pp. 30–36.
Meisel, K.-H.: Programmierung und Führung von Roboterbewegungen. In [1].
Pieper, D.L.: The kinematics of manipulators under computer control. Stanford A.I., Res.Rep. Memo 72, Oct. (1968).
Paul, R.P.: Modeling trajectory calculation and servoing of a computer controlled arm. Rep. Stanford Artificial Intell. Lab. Stanford Univ. Memo. 177, Sept (1972).
Schiehlen, W.; E. Kreuzer: Rechnergestütztes Aufstellen der Bewegungsgleichungen gewöhnlicher Mehrkörpersysteme. Ingenieur-Archiv Vol. 46 (1977), pp. 185–194.
Patzelt, W.: Zur Lageregelung von Industrierobotern auf der Grundlage des inversen Systems. Dissertation Uni. Duisburg (1982).
Kuntze, H.-B.: Regelungsalgorithmen für Industrieroboter - eine Übersicht. In diesem Band.
Patzelt, W.: Zur Lageregelung von Industrierobotern bei Entkopplung durch das inverse System. Regelungstechnik, Vol. 29 (1981), No. 12, pp. 411–422.
Föllinger, Anwendung.O.: Regelungstechnik-Einführung in die Methoden und ihre Elitera-Verlag Berlin, (1978), 414p.
Stute, G.; sierung in No. 6, pp.D. Plasch: Trends bei technischen Mitteln zur Automatider Fertigung. Regelungstechnische Praxis Vol. 25 (1983), 229–232.
Stute, G.: Die Lageregelung an Werkzeugmaschinen. Umdruck des Institutes für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen der Universität Stuttgart, Stuttgart (1973), S. 274.
Luh, J.Y; M.W. Walker; R.P. Paul: Resolved-acceleration control of mechanical manipulators. IEEE Trans. on Auto. Control, Vol. AC-25 (1980), No. 3, pp. 468–474.
Becker, P.-J.; A. Jacubasch; H.-B. Kuntze: On the design of a computer controlled elastic industrial robot. Proc. IASTED Symp. on Applied Control 8 identification, Copenhagen, (1983).
Becker, P.-J.; A. Jacubasch; H.-B. Kuntze: Möglichkeiten und Grenzen rechnergestützter Verfahren bei der Entwicklung fortgeschrittener Regelungssysteme für Industrieroboter. Tagungsband VDI/VDE-GMRAussprachetag (1983) Langen b. Frankfurt.
Becker, P.-J.: Roboter als Werkzeugmaschine. FhG-Berichte (1982), No. 2, pp. 34–37.
Meisel, K.-H.; Steusloff, H.: Koordinatentransformation bei Industrierobotern, realisiert mit PEARL. Elektrotechnische Zeitschrift (1982), No. 14.
Nevins, J.L.; D. E. Whitney et al.: Exploratory research in industrial modular assembly. Charles Draper Lab. M.I.T. Cambridge MA, 6th Rep. Aug. (1978).
Nevins, J.L.; D.E. Whitney: Computer controlled assembly. Sci. American, Vol. 238 (1978), pp. 62–74.
Kuntze, H.-B.; W. Schill: Methods for collision avoidance in computer controlled industrial robots. Proc. 12th Intern. Symp. on Industrial Robots 6th Int. Conf. on Ind. Robot. Techn., June (1982) Paris.
Kuntze, H.-B.; W. Schill: Verfahren zur Steigerung der Zuverlässigkeit und Sicherheit von Industrierobotern. In diesem Band.
Haass, U.; H.-B. Kuntze; W. Schill: A surveillance system for obstacle recognition and collision avoidance control. Proc. 2nd Int. Conf. on Robot Vision and Sensory Controls, Stuttgart, Nov. (1982).
Foith, J.P.: Intelligente Bildsensoren zum Sichten, Handhaben, Steuern und Regeln. Springer-Verlag Berlin, Heidelberg, New York (1982).
Syrbe, M.: Übersicht über ein Projekt “Sehr fortgeschrittene Hand, habungssysteme”. In [1].
Folberth, O.G.: Grenzen der digitalen Elektronik. Tagungsberichte NTG-Fachtagung, März ( 1983 ), Baden-Baden, VDE-Verlag Berlin-Offenbach (1983).
Büchsenschütz, B.; R. Grimm; M. Rudolf: Ein-/Ausgabe-Farbbildschirmsystem zur Bahnvorgabe. In [1].
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1984 Springer-Verlag Berlin, Heidelberg
About this chapter
Cite this chapter
Kuntze, HB., Patzelt, W. (1984). Einsatz regelungstechnischer Verfahren für typische Roboteranwendungen. In: Becker, PJ. (eds) Sehr fortgeschrittene Handhabungssysteme. Fachberichte Messen · Steuern · Regeln, vol 9. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-82315-2_2
Download citation
DOI: https://doi.org/10.1007/978-3-642-82315-2_2
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-13594-4
Online ISBN: 978-3-642-82315-2
eBook Packages: Springer Book Archive