Abstract
The useful life of a driveshaft is determined mainly by the joints. For this reason the other component parts will not be discussed here; they can in any case be designed using the general principles of strength of materials.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literature to Chapter 4
Karas, F.: Der Ort größter Beanspruchung in Wälzverbindungen mit verschiedenen Druckfiguren. (The location of the greatest stress in rolling connections with various pressure distributions). Forsch. Ingenieuwes. 12 (1941) p. 237–43
Beljajef, N. M.: Memoirs on Theory of Structures. St. Petersburg 1924
Foeppl, L.: Der Spannunszustand und die Anstrengung des Werkstoffes bei der Berührung zweier Körper. (The stress state and strain of the material when two bodies touch) Forsch. Ingenieurwes. 7 (1936) p. 209–221
Timoshenko, St.: Theory of elasticity. New York: McGraw-Hill 1934, 339–352
Mundt, R.: Ermüdungsbruch und zulässige Belastung von Wälzquerlagern. (Fatigue fracture and permissible loading of roller bearings). VDI Z. 73 (1929) p. 52–59
Gough, H. J.: The fatigue of metals, London: Benn 1926
Moore, H. F.: Kommers, J. B.: The fatigue of metals, New York: McGraw-Hill 1927
Niemann, G.: Maschinenelemente (Machine Elements). Vol. 1. Berlin: Springer 1963 p. 210
Loroesch, H. K.: Influence of Load on the Magnitude of the Life Exponent for Rolling Bearings. American Society for Testing and Materials (ASTM), Special Technical Publication 771, p. 275–292. Philadelphia 1982.
ISO 76, 1987, Sect. 6. 1, p. 5
Fischer, W.: Die Berechnung der dynamischen Tragfähigkeit von Wälzlagern (Calculating the dynamic load capacity of roller bearings). 2nd Edition. Schweinfurt: SKF Kugellagerfabriken GmbH 1958, p. 19, 21
DIN ISO 281, 1979, Part 1, sect. 6. 1, p. 9
Jante, A.: Kraftfahrt-Mechanik, 3 Der Kraftschluß m. d. Fahrbahn (Motor vehicle mechanics, 3. Friction at the road surface). In: Bussien, R. (Publisher): Automobiltechnisches Handbuch(Handbook on Automotive Engineering). 14th Edition:, M. Krayn, Techn. Verlag 1941, p. 9–15
Reuthe, W.: Die Bewegungsverhältnisse bei Kreuzgelenkantrieben (Relationships of movement for Hooke’s jointed drives). Konstruktion 2 (1950) 305–312
Kleinschmidt, H. J.: Gelenkwellen. In: Anwendungen der Antriebstechnik (Driveshafts. In: Applications of driveline technology). Vol. II Kupplungen (Couplings). Mainz: Krausskopf 1974, p. 45/46
Dunkerley, S.: The Whirling and Vibration of Shafts. Phil Soc. Trans. London 185 (1984)
Grammet, R.: Neuere Untersuchungen über kritische Zustände rasch umlaufender Wellen (Recent investigations into the critical states of rapidly rotating shafts). Ergeb. d. Exakten Naturwiss. 1 (1922) p. 92–119
Biezeno, C. B.; Grammel, R.: Technische Dynamik (Engineering Dynamics) Berlin: Springer 1939 4.19 Foeppl, A.: Technische Mechanik. (Engineering mechanics) Vol. IV Dynamik. 2nd Edition. Munich: Oldenbourg 1901, p. 248–252
Stodola, A.: Die Dampfturbinen (Steam turbines), 3rd Edition Berlin: Springer 1905, p. 193–196 4.21 Dietz, H.: Die Übertragung von Momenten in Kreuzgelenken (Torque transmission in Hooke’s joints). VDI Z. 82 (1938) 825–828 and 83 (1939) p. 508
Lehr, E.: Die umlaufenden Massen als Schwingungserreger (Rotating masses as vibration sources) Masch. Bau/Gestaltung 1 (1982) p. 629–634
Richtlinie VDI (VDI Directive)•2060: Beurteilungsmaßstäbe für den Auswuchtzustand rotierender starrer Koerper (Criteria for assessing the state of balance of rotating rigid bodies). Düsseldorf: VDI-Verlag 1966
Phillips, J. R.; Winter, H.: Über die Frage des Gleitens in Kugel-Gleichganggelenken (On the question of sliding in constant velocity ball joints). VDI Z. 110 (1968) p. 228–233
Macielinski, J. W.: Propeller shafts and universal joints—Characteristics and methods of selection. Conf. Drive Line Engineering 1970. Inst. Mechanical Engineers, Automotive Division, Session 3, Paper 29
Stellrecht, H.: Die Belastbarkeit der Wälzlager (The load carrying capacity of roller bearings). Berlin: Springer 1928
Schuetz, W.: Zenner, H.: Schadensakkumulationshypothesen zur Lebensdauervorhersage (Hypotheses on the accumulation of damage for life prediction). Z. Werkstofftech. 4 (1973) 25–33, p. 97–102
Schreier, G.; Mittag, H.: Messungen an Kfz-Getrieben im Fahrbetrieb (Measurements on vehicle transmissions in service) Kfz-Technik 9 (1959) p. 319–325
Dickenson, J. I.: Vehicle data acquisition and its application in drive shaft endurance testing. Driveline ‘84. The Automobile Division of the Institution of Mechanical Engineers (1984) Paper C4/84
Sharp, F.: Techniques for endurance testing of automotive driveshaft components. Production and Simulation of In-Service Conditions. The Automobile Division of the Institute of Mechanical Engineers (1985) Paper C102/85.
Drury, S. E.; Walters, R. M.; Hill, S. J.: Techniques for optimizing the weight and durability of 4 x 4 driveline components. Production and Simulation of In-Service Conditions. The Automobile Division of the Institution of Mechanical Engineers (1985) Paper C109/85
Hill, S. J.; Everitt, D. R.: The use of service load measurement and analysis for driveline components. First International Conference of the Engineering Integrity Society (1986).
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1992 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Schmelz, F., Seherr-Thoss, C.HC., Aucktor, E. (1992). Designing Joints and Driveshafts. In: Universal Joints and Driveshafts. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-02746-2_4
Download citation
DOI: https://doi.org/10.1007/978-3-662-02746-2_4
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-53314-6
Online ISBN: 978-3-662-02746-2
eBook Packages: Springer Book Archive