Abstract
The term “parametric pumping” implies the idea of pumping, that is of transport of material (in our case, ionic species) up along some potential scale (in our case, chemical potential), at the cost of degradation of some flux of energy (to be specified later). The term “parametric” refers to the fact that the energy flux just mentionned is obtained by modulating some intensive thermodynamic parameter such as temperature, pressure, ionic strength, pH, electric potential, … Typical examples are temperature-swing ion-exchange and pressure-swing adsorption. The concept of parametric pumping is due to Wilhelm and coworkers (1966, 1968). Their original results deal with adsorption from the liquid phase, modulated by temperature. Let us examine how these phenomena are implemented.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
References
Review Articles
Chen H.T., 1979, “Parametric pumping”, Section 1–15, p. 467–486 in “Handbook of separation techniques for chemical engineers”, P.A. Schweitzer (Ed.), McGraw-Hill, New York
Grevillot G., 1985; “Principles of parametric pumping” chapter 36, p. 1283–1321, in “Handbook for heat and mass transfer”, N.P. Cheremisinoff (Ed.), Gulf Publ., West Orange, N.J., U.S.A. (to be published )
Rice R.G., 1976, “Progress in parametric pumping”, Separ. Purif. Methods, 5 (n° 1), p. 139–176
Wankat P.C., 1974, “Cyclic separation processes”, Separ. Science, 9 (n° 2), p. 85–116
Wankat P.C., 1978, “Cyclic separation techniques”, p. 443–515 in “Percolation processes, theory and applications”, A.E. Rodrigues and D. Tondeur (Eds), Sijthoff and Noordhoff, Alphen aan den Rijn (Netherlands).
References Quoted in Text
Ackermann G.R., Barrett J.H., Bossier J.F., Dabby S.S., 1976, “Industrial deionization with Amberlite XD-2; a thermally regenera ble ion-exchange resin”, p. 107–111 in “Water 1976 — Physical, chemical wastewater treatment”, A.I.Ch. E. Symp. Series 73 (n° 166).
Almeida F., Grevillot G., Costa C., Rodrigues A., 1982, “Removal of phenol from wastewater by recuperative mode parametric pumping”, p. 169–178 in “Physicochemical Methods for Water and Wastewater Treatment”, L. Pawlowski, Editor, Elsevier, Amsterdam.
Bailly M., Tondeur D., 1980, “Thermal fractionation by moving-bed ion-exchange: principles and experiments”, J. Chromatog., 201, p. 343–357.
Baker B., Pigford R.L., 1971, “Cycling-zone adsorption: quantitative theory and experimental results”, Ind. Eng. Chem. Fundam., 10 (n° 2), p. 283–292.
Bolto B.A. et al, 1970, “Thermal regeneration of weak-electrolyte resins”, p. 270–279 in “Ion-exchange in the process industries”, Society of Chem. Industr. Editor, London 1970.
Bolto B.A., 1975, “Sirotherm Desalination”, Chem. Tech., May 1975, p. 303–307.
Bolto B.A., Swinton E.A. et al, 1984, “The present status of continuous ion-exchange using magnetic micro-resins”, p. 542–562 in “Ion-exchange technology”, D. Naden and M. Streat (Eds), Ellis Horwood Ltd, Chichester, 1984.
Butts T.J., Sweed N.H., Camero A.A., 1973, “Batch fractionation of ionic mixtures by parametric pumping”, Ind. Eng. Chem. Fundam. 12 (n° 4) p. 467–472.
Camero A.A., Sweed N.H., 1976, “Separation of non-linearly sorbing solutes by parametric pumping”, A.I.Ch. E. Journal 22 (n° 2), p. 369–376.
Chen H.T., Hill F.B., 1971, “Characteristics of batch and continuous equilibrium parametric pumps”, Separ. Sci., 6 (n° 3), p. 411–434.
Chen H.T., Rak J.L., Stokes J.P., Hill F.B., 1972, “Separations via continuous parametric pumping”, A.I.Ch. E. Journal, 18 (n° 2), p. 356–361.
Chen H.T., Reiss E.R., Stokes J.D., Hill F.B., 1973, “Separations via semi-continuous parametric pumping”, A.I.Ch. E. Journal, 19 (n° 3), p. 589–595.
Chen H.T., Manganaro J.A., 1974, “Optimal performance of equilibrium parametric pumps”, A.I.Ch.E. Journal, 20 (n° 5), p. 1020–1022.
Chen H.T., Lin W.W., Stokes J.D., Fabrisiak W.R., 1974, “Separation of multicomponent mixtures via thermal parametric pumping”, A.I.Ch.E. Journal, 20 (n° 2), p. 306–310.
Chen H.T., D’Emidio V.J., 1975, “Separation of isomers via thermal parametric pumping”, A.I.Ch.E. Journal, 21 (n° 4), p. 813–815.
Chen H.T., Wong Y.W., Wu S., 1975, “Continuous fractionation of protein mixtures by pH parametric pumping”, A.I.Ch.E. Journal, 25 (n° 2), p. 320–327.
Chen H.T., Ahmed Z.M., Rollen V., 1981, “Parametric pumping with pH and ionic strength: enzyme purification”, Ind. Eng. Chem. Fundam., 20, p. 171–174.
Foo S.C., Rice R.G., 1975, “On the prediction of ultimate separations in parametric pumps”, A.I.Ch. E. Journal, 21 (n° 6), p. 1149–1158.
Foo S.C., Rice R.G., 1977, “Steady-state predictions for non- equilibrium parametric pumps”, A.I.Ch.E. Journal, 23 (n°1) p. 120–123.
Ginde V.R., Chu C., 1972, Desalination, 10, p. 309.
Goto S., Sato N., Teshima H., 1979, “Periodic operation for desalting water with thermally regenerable ion-exchange resin”, Separ. Sci. Technol., 14 (n° 3), p. 209–217. See also Matsuda et al, 1971, Ibid., 16 (n° 1), p. 31–41.
Gregory R.A., Sweed, N.H., 1981, “Parametric pumping: behavior of open systems. II: Experiment and computation”, The Chem. Eng. J., 4, p. 139–148.
Grevillot G., Tondeur D., 1976, “Equilibrium-staged parametric pumping. I: Single transfer step per half-cycle and total reflux. The analogy with distillation”, A.I.Ch.E.Journal, 22 (n° 6), p. 1055–1063.
Grevillot G., Tondeur D., 1977, “Equilibrium-staged parametric pumping. II: Multiple transfer steps per half-cycle and reservoir staging”, A.I.Ch. E. Journal, 23 (n° 6), p. 840–851.
Grevillot G., 1980, “Equilibrium-staged parametric pumping. Ill: Open systems at steady-state-McCabe-Thiele diagrams”, A.I.Ch. E. Journal, 26 (n° 1), p. 120–131.
Grevillot G., Dodds J., Marques S., 1980, “Separation of silver- copper mixtures by ion-exchange parametric pumping. Total reflux separation”, J. Chromatogr. 201, p. 329–342.
Grevillot G., Marques S., Tondeur D., 1984, “Donnan partition parametric pumping”, Reactive Polymers, 2, p. 71–77.
Grevillot G., Tondeur D., 1984, “Silver-copper separation by continuous ion-exchange parametric pumping”, p. 653–660 in “Ion-exchange technology”, D. Naden and M. Streat (Eds), Ellis Horwood Ltd., Chichester, 1984.
Hollein H.C. et al, 1982, “Parametric pumping with pH and electric field: protein separations”, Ind. Eng. Chem. Fundam., 21, p. 205–214.
Kenney C.N., Kirkby N.F., 1984, “Pressure-Swing Adsorption” in “Zeolites: science and technology”, Ribeiro et al (Eds), Martinus Nijhoff, The Hague.
Kraus K.A., Raridon R.J., 1959, “Temperature dependence of some cation exchange equilibria in the range 0 to 200°C”, J. Phys. Chem., 63, p. 1901.
Marques S., 1978, internal report, Lab. Sciences Génie Chimique- CNRS, ENSIC-Nancy (France).
Pigford R.L., Baker B., Blum D.E., 1969, “An equilibrium theory of the parametric pump”, Ind. Eng. Chem. Fundam., 8, p. 603–604.
Pigford R.L., Baker B., Blum D.E., 1969, “Cycling-zone adsorption; a new separation process”, Ind. Eng. Chem. Fundam., 8 (n° 4), p. 848–851.
Rachez D., Delaveau G., Grevillot G., Tondeur D., 1982, “Stagewise liquid-liquid extraction parametric pumping — Equilibrium analysis and experiments”, Separ. Sci. Technol., 17 (n° 4), p. 589–619.
Rice R.G., 1975, “The effect of purely sinusoïdal potentials on the performance of equilibrium parapumps”, Ind. Eng. Chem. Fundam., 14 (n° 4), p. 362–365.
Rice R.G., 1975, Ind. Eng. Chem. Fundam., 14, p. 362.
Rice R.G., 1976, “Progress in Parametric Pumping”, Separ. Purif. Methods, 5 (n° 1), p. 139–188.
Rice R.G., Foo S.C., Gough G.G., 1979, “Limiting separations in parametric pumps”, Ind. Eng. Chem. Fundam., 18 (n° 2), p. 117–123.
Rice R.G., 1981, “Adsorptive distillation”, Chem. Eng. Communic., 10, p. 111–126.
Rice R.G., Foo S.C., 1981, “Continuous desalination using cyclic mass-transfer on bifunctional resins”, Ind. Eng. Chem. Fundam., 20 (n° 2), p. 150–155.
Rolke R.W., Wilhelm R.H., 1969, “Recuperative parametric pumping”, Ind. Eng. Chem. Fundam., 8 (n° 2), p. 235–245.
Sabadell J.E., Sweed N.H., 1970, “Parametric pumping with pH”, Separ. Sci., 5 (n° 3), p. 171–181.
Shaffer A.G., Hamrin C.E., 1975, “Enzyme separation by parametric pumping”, A.I.Ch. E. Journal, 21 (n° 4), p. 782–786.
Shi T.T., Pigford R.L., 1977, “Removal of salt from water by thermal cycling of ion-exchange resins”, p. 129–150 in “Recent Developments in Separation Science”, Li N.N. (Ed), CRC Press, Cleveland (USA )
Sweed N.H., Gregory R.A., 1970, “Parametric pumping: modeling direct thermal separation of sodium chloride-water in open and closed systems”, A.I.Ch. E. Journal, 17 (n° 1), p. 171–176.
Sweed N.H., Rigaudeau J., 1975, “Equilibrium theory and scale-up of parametric pumps”, A.I.Ch. E. Symp. Series, 71 (n° 152), p. 1–5.
Tondeur D., 1978, “Dual-step countercurrent processes”, p. 517–538 in “Percolation processes”, A.E. Rodrigues and D. Tondeur (Eds), Sijthoff and Noordhoff, Alphen aan den Rijn (Netherlands).
Tondeur D., Wankat P.C., 1985, “Gas purification by pressure-swing adsorption”, Separ. Purif. Methods (to be published).
Treybal R.E., 1955, “Mass Transfer Operations”, McGraw Hill, New York.
Van der Schoot M.R., 1977, “Boron thermal regeneration system”, U.S. Pat. 4,017,358 (April 12, 1977 ).
Vermeulen T., 1977, “Process arrangements for ion-exchange and adsorption”, Chem. Eng. Progr., oct 1977, p. 57.
Wakao N.H., Matsumoto K., Suzuki M., Kawahara A., 1968, “Adsorption separation of liquids by mean of parametric pumping”, Kagaku Kogaku 32, 169 (in Japanese).
Wankat P.C., 1973a,“Liquid-liquid extraction parametric pumping”, Ind. Eng. Chem. Fundam., 12 (n° 3) p. 372–381.
Wankat P.C., 1973b, “Cycling-zone extraction”, Separ. Sci., 8 (n°4) p. 473–500.
Wankat P.C., 1974, “Cyclic separation processes”, Separ. Science, 9 (n° 2), p. 85–116.
Wankat P.C., 1977, “Fractionation by cycling-zone adsorption”, Chem. Eng. Sci., 32, p. 1283–1287.
Wankat P.C., 1978, “Continuous recuperative mode parametric pumping”, Chem. Eng. Sci., 33, p. 723–733.
Weiss D.E., Bolto B.A. et al, 1965–1982, “An ion-exchange process with thermal regeneration”. Part I: J. Austr. Instn. Engrs. 1965, 37, p. 193. Parts II to VI: Aust. J. Chem., 1966–1968. Parts VII to XVI: Desalination, 1970–1982.
Wilhelm R.H., Rice A.W., Bendelius A.R., 1966, “Parametric pumping a dynamic principle for separating fluid mixtures”, Ind. Eng. Chem. Fundam., 5 (n° 1), p. 141–144.
Wilhelm R.H., Rolke D.W., Sweed N.H., 1968, “Parametric pumping: a dynamic principle for separating fluid mixtures”, Ind. Eng. Chem. Fundam., 7, p. 337–349.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1986 Martinus Nijhoff Publishers, Dordrecht
About this chapter
Cite this chapter
Tondeur, D., Grevillot, G. (1986). Parametric Ion-Exchange Processes (Parametric Pumping and Allied Techniques). In: Rodrigues, A.E. (eds) Ion Exchange: Science and Technology. NATO ASI Series, vol 107. Springer, Dordrecht. https://doi.org/10.1007/978-94-009-4376-6_14
Download citation
DOI: https://doi.org/10.1007/978-94-009-4376-6_14
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-010-8445-1
Online ISBN: 978-94-009-4376-6
eBook Packages: Springer Book Archive