Abstract
Three-dimensional (3D) composites have good delamination resistance along with high specific stiffness and high specific strength. Composite tube shafts are modeled with different reinforcement architecture such as multi-axial, stitched, knitted, braided, orthogonal woven, interlock and z-pinned. The in-plane elastic properties at different fiber volume fractions of these composites are obtained from the literature. 3D composite tube shafts are modeled with length: 1 m, internal radius: 25 mm and thickness: 4 mm using modified equivalent modulus beam theory formulation. Modal analysis is carried out, and bending natural frequencies are calculated for different 3D composite tube shafts with E-glass, carbon and kevlar fibers and epoxy as matrix materials. The natural frequency reduces with through thickness reinforcement for orthogonal, knitted, z-pinned and stitched composites. Braided composites tube shafts have higher natural frequencies compared to that of other types.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Mouritz AP, Bannister MK, Falzon PJ, Leong KH (1999) Review of applications for advanced three-dimensional fibre textile composites. Compos A Appl Sci Manuf 30(12):1445–1461
Bilisik K (2012) Multiaxis three-dimensional weaving for composites: a review. Text Res J 82(7):725–743. https://doi.org/10.1177/0040517511435013
Gereke T, Cherif C (2019) A review of numerical models for 3D woven composite reinforcements. Compos Struct 209:60–66
Mouritz AP, Cox BN (2010) A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned composites. Compos A Appl Sci Manuf 41(6):709–728
Huang T, Wan Y, Wang G (2017) A review of the mechanical properties of a 3D Woven composite and its applications. Polym-Plast Technol Eng. https://doi.org/10.1080/03602559.2017.134485
Gnaba I, Legrand X, Wang P, Soulat D (2018) Through-the-thickness reinforcement for composite structures: a review. J Indus Textil 1–26. https://doi.org/10.1177/1528083718772299
Mohamed M, Bogdanovich AE (2009) Comparative analysis of different 3D weaving processes, machines and products. In: Proceedings of 17th international conference on composite materials (ICCM-17), Edinburgh, CD edition
Mouritz AP (2007) Review of z-pinned composite laminates. Compos A Appl Sci Manuf 38(12):2383–2397
Steeves CA, Fleck NA (2006) In-plane properties of composite laminates with through-thickness pin reinforcement. Int J Solids Struct 43(10):3197–3212
Singh SP, Gupta K (1994) Free damped flexural vibration analysis of composite cylindrical tubes using beam and shell theories. J Sound Vib 172(2):171–190
Gubran HBH, Gupta K (2005) The effect of stacking sequence and coupling mechanisms on the natural frequencies of composite shafts. J Sound Vib 282:231–248
Gubran HBH (2005) Dynamics of hybrid shafts. Mech Res Commun 32:368–374
Alwan V, Gupta A, Sekhar AS, Velmurugan R (2010) Dynamic analysis of shafts of composite materials. J Reinf Plast Compos 29(22):3364–3379
Udatha P, Sekhar AS, Velmurugan R, The effect of CNT to enhance the dynamic properties of hybrid composite tube shafts. Mech Adv Mater Struct. https://doi.org/10.1080/15376494.2018.1534172
Labanieh AR, Liu Y, Vasiukov D, Soulat D, Panier S (2017) Influence of off-axis in-plane yarns on the mechanical properties of 3D composites. Compos A Appl Sci Manuf 98:45–57
Chun HC, Kim HW, Byun JH (2006) Effects of through-the-thickness stitches on the elastic behavior of multi-axial warp knit fabric composites. Compos Struct 74(4):484–494
Li N, Tahar NB, Aboura Z, Khellil K (2016) A dynamic analysis approach for identifying the elastic properties of unstitched and stitched composite plates. Compos Struct 152:959–968
Huang ZM, Ramakrishna S (2000) Micromechanical modeling approaches for the stiffness and strength of knitted fabric composites: a review and comparative study. Compos A Appl Sci Manuf 31:479–501
Hamada H, Ramakrishna S, Huang ZM (1999) 3-D textile reinforcements in composite materials—knitted fabric composites. Woodhead Publishing Ltd
Jiang L, Zeng T, Yan S, Fang D (2013) Predicting mechanical properties of 3D braided composites using a helix geometry model. Compos Struct 100:511–516
Mahmood S, Sadegh S (2012) A new analytical model for calculation of stiffness of three-dimensional four-directional braided composites. Composite Structures
Lomov SV, Bogdanovich AE, Ivanov DS, Mungalov D, Karahan M, Verpoest I (2009) A comparative study of tensile properties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites. Part 1: Materials, methods and principal results. Compos Part A: Appl Sci Manuf 40(8):1134–1143
Tan P, Tong L, Steven GP (2001) Mechanical behavior for 3-D orthogonal woven E-Glass/epoxy composites. J Reinf Plast Compos 20(4):274–303
Naik NK, Durga Prasad S, Thuruthimattam JB, Stress and failure analysis of 3D orthogonal interlock woven composites. J Reinf Plast Compos 20(17):1485–1523
Grassi M, Zhang M, Meo M (2002) Prediction of stiffness and stresses in z-fibre reinforced composite laminates. Compos Part A: Appl Sci Manuf 33(12):1653–1664
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Udatha, P., Sekhar, A.S., Velmurugan, R. (2021). Dynamic Analysis of Three-Dimensional Composite Tube Shafts. In: Rao, J.S., Arun Kumar, V., Jana, S. (eds) Proceedings of the 6th National Symposium on Rotor Dynamics. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-5701-9_5
Download citation
DOI: https://doi.org/10.1007/978-981-15-5701-9_5
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-5700-2
Online ISBN: 978-981-15-5701-9
eBook Packages: EngineeringEngineering (R0)