Abstract
Accurate data allow one to draw a precise pressure — P CO/P SiO ratio — temperature (PRT) diagram taking into account the mass balance of the independent components in the Si-C-O system. The existence of a congruent point for the mixture 2SiO2+1SiC is shown, when the total pressure is lower than 36 700 Pa. From the PRT diagram it is possible to construct the phase diagrams at all temperatures and pressures.
Similar content being viewed by others
References
W. A. Krivsky and R. Schuhmann Jr, Trans. Metall. Soc. AIME 221 (1961) 898.
A. Ghosh and G. R. St Pierre, ibid. 245 (1969) 2106.
H. L. Lukas, J. Weiss, H. Krieg, E. T. Henig and G. Petzow, High Temp. High Press. 14 (1982) 607.
V. I. Berdnikov and M. I. Karteleva, Izv. Vysš. Učeb. Zaved., Čern Metallurg. 12 (1983) 132.
A. Schei and K. Larsen, in Proceedings of 39th Electric Furance Conference (ISS AIME, Warrendale, Pennsylvania 1981) p. 301.
T. Rosenqvist, “Principles of Extractive Metallurgy”, 2nd Edn (McGraw-Hill, New York, 1983).
V. I. Berdnikov, V. G. Mizin and M. I. Karteleva, Izv. Vysš. Učeb Zaved., Čern. Metallurg. 12 (1982) 31.
Idem, Ibid. 2 (1983) 31.
M. Nagamori, I. Malinsky and A. Claveau, Metall. Trans. B 17b (1986) 503.
O. Minster, Thesis, INP Grenoble (1984).
R. W. Olesinski and G. J. Abbaschian, Bull. Alloy Phase Diagr. 5 (1984) 486.
E. T. Turkdogan, “Physical Chemistry of High Temperature Technology” (Academic, New York, 1980).
O. Kubaschewsky and C. B. Alcock, “Metallurgical Thermochemistry”, 5th Edn (Pergamon, Oxford, 1979).
T. Rosenqvist and J. K. Tuset, Metall. Trans. B 18B (1987) 471.
JANAF Thermochemical Tables, 2nd Edn (National Bureau of Standards, US Department of Commerce, Washington, DC, 1971).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Danes, F., Saint-Aman, E. & Coudurier, L. The Si-C-O system. JOURNAL OF MATERIALS SCIENCE 28, 489–495 (1993). https://doi.org/10.1007/BF00357828
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00357828