Summary
The engineering design of furniture frames was investigated. The stiffness method of matrix structural analysis was applied to furniture frame design, and modifications of it which are needed to treat frames with semi-rigid, elastically non-linear joints of finite size were developed. A method of designing two-pin moment-resisting dowel joints was also developed. An experimental furniture frame was designed using the theories formulated. Results of tests performed on this frame agreed satisfactorily with those predicted theoretically.
Zusammenfassung
Die technische Konstruktion von Möbelrahmen wurde untersucht. Ein Rechenverfahren zur Bestimmung der Steifigkeit wurde mit Hilfe der Matrizen-Analyse auf Möbelrahmen-Konstruktionen angewendet und entsprechende Abwandlungen, die zur Behandlung von Rahmen mit halbstarren, elastisch nicht-linearen Verbindungen bestimmter Größe benötigt werden, wurden entwickelt. Gleichzeitig wurde ein Verfahren zur Konstruktion von biegesteifen Doppel-Dübelverbindungen entwickelt. Ein Versuchs-Möbelrahmen wurde aufgrund der erarbeiteten Theorie gebaut. Die Ergebnisse aus den Versuchen mit diesem Rahmen stimmten weitgehend mit den hierfür theoretisch berechneten Werten überein.
Similar content being viewed by others
References
Eckelman, C. A.: The Strength Design of Furniture. For. Prod. J. 16 (1966) No. 3, 21–24
Eckelman, C. A.: Furniture Mechanics: Framed Cabinet Furniture. Purdue University, Agriculture Experiment Station, Bulletin No. 826, 1967a, Lafayette, Indiana.
—: Furniture Mechanics: Chair Frame Analysis and Design. For. Prod. J. 17 (1967) No. 9, 100–106
Eckelman, C. A.: Furniture Frame Analysis and Design. Unpublished PhD Thesis 1968, Purdue University, Lafayette, Indiana.
Large, G. E.: Basic Reinforced Concrete Design. New York 1957: The Ronald Press Company.
Lothers, J. E.: Advanced Design in Structural Steel. Englewood Cliffs 1960: Prentice-Hall Inc.
Parcel, J. I., and R. B. Moorman: Analysis of Statically Indeterminate Structures. New York 1955: John Wiley and Sons, Inc.
Pei, Ming L.: Stiffness Method of Rigid Frame Analysis. ASCE 2nd Conference on Electronic Computation 1960, Pittsburgh.
Rubinstein, M. F.: Matrix Computer Analysis of Structures. Englewood Cliffs 1966: Prentice-Hall Inc.
Tezcan, S. S.: Computer Analysis of Plane and Space Structures. J. of Structural Division, ASCE Volume 92 (1966).
Wilson, E. L.: Matrix Analysis of Non-Linear Structures. ASCE 2nd Conference on Electronic Computation 1960, Pittsburgh.
Author information
Authors and Affiliations
Additional information
“Journal Paper No. 3575 of Purdue University Agr. Expt. Station”.
Rights and permissions
About this article
Cite this article
Eckelman, C.A., Suddarth, S.K. Analysis and design of furniture frames. Wood Science and Technology 3, 239–255 (1969). https://doi.org/10.1007/BF00367215
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00367215