References
T. Angel, J. Iron and Steel Inst. 177 (1954) 165.
J. p. Bressanelli and A. Moskowitz, Trans. Amer. Soc. Metals 59 (1966) 223.
D. v. Neff, T. e. Mitchell and A. r. Troiano, ibid. 62 (1969) 858.
D. Fahr, Metall. Trans. 2 (1971) 1883.
J. Singh, J. Mater. Sci. 20 (1985) 3157.
P. c. Maxwell, A. Goldberg and J. c. Shyne, Metall. Trans. 5 (1974) 1305.
H. Fujita and S. Ueda, Acta Metall. 20 (1972) 759.
P. l. Mangonon and G. Thomas, Metall. Trans. 1 (1970) 1577.
F. Lecroisey and A. Pineau, ibid. 3 (1972) 387.
F. Abrassart, ibid. 4 (1973) 2205.
G. Olson and M. Cohen, ibid. 6A (1975) 791.
S. c. Tjong and N. j. Ho, Mater. Sci. Engng A102 (1988) 125.
T. Narutani, Mater. Trans., JIM 30 (1989) 33.
R. g. Luther and T. r. g. Williams, Metal Sci. 11 (1977) 219.
P. c. Maxwell, A. Goldberg and J. c. Shyne, Metall. Trans. 5 (1974) 1319.
D. Bhandarkar, V. f. Zackay and E. r. Parker, ibid. 3 (1972) 2619.
P. Marshall, “Austenitic stainless steels - microstructure and mechanical properties” (Elsevier, London, 1984) p. 31.
G. e. Dieter, “Mechanical metallurgy” (McGraw-Hill, Singapore, 1988) p. 192.
S. ganesh Sundara raman and K. a. Padmanabhan, Int. J. Fatigue 14 (1992) 295.
A. r. Entwisle, Metall. Trans. 2 (1971) 2395.
N. Narita, C. j. Altstetter and H. k. Birnbaum, ibid. 13A (1982) 1355.
S. s. Hecker, M. g. Stout, K. p. Staudhammer and J. l. Smith, ibid. 13A (1982) 619.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sundara Raman, S.G., Padmanabhan, K.A. Tensile deformation-induced martensitic transformation in AISI 304LN austenitic stainless steel. J Mater Sci Lett 13, 389–392 (1994). https://doi.org/10.1007/BF00420808
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00420808