Abstract
There are important differences in the microstructures of specimens of a superplastic copper alloy deformed in the three regions of flow associated with superplasticity. There is very extensive dislocation activity at high strain rates in Region III, whereas at intermediate and low strain rates in Regions II and I the dislocation density is low and many of the grains appear to be dislocation-free. Measurements show that grain-boundary sliding is important in Region II but decreases in magnitude in the less superplastic Regions I and III.
Similar content being viewed by others
References
J. W. Edington, K. N. Melton and C. P. Cutler, Prog. Mater. Sci. 21 (1976) 61.
D. M. R. Taplin, G. L. Dunlopand T. G. Langdon, Ann. Rev. Mater. Sci. 9 (1979) 151.
H. Naziri, R. Pearce, M. Henderson Brown and K. F. Hale, J. Microsc. 97 (1973) 229.
H. Naziri, R. Pearce, M. Henderson Brown and K. F. Hale, Acta Met. 23 (1975) 489.
R. H. Bricknell and J. W. Edington, ibid. 25 (1977) 447.
R. C. Gifkins, J. Mater. Sci. 13 (1978) 1926.
L. C. A. Samuelsson, K. N. Melton and J. W. Edington, Acta Met. 24 (1976) 1017.
K. Matsuki, Y. Uetani, M. Yamada and Y. Murakami, Metal Sci. 10 (1976) 235.
R. Z. Valiev and O. A. Kaibyshev, Phys. Stat. Sol. (a) 44 (1977) 477.
O. A. Kaibyshev, B. V. Rodionov and R. Z. Valiev, Acta Met. 26 (1978) 1877
K. Matsuki, K. Minami, M. Tokizawa and Y. Murakami, Metal Sci. 13 (1979) 619.
R. Z. Valiev, O. A. Kaibyshev, M. M. Myshlayev and D. R. Chalaev, Scripta Met. 14 (1980) 673.
T. G. Langdon, J. Mater. Sci. 16 (1981) 2613.
S.-A. Shei and T. G. Langdon, Acta Met. 26 (1978) 639.
Idem, ibid. 26 (1978) 1153.
Idem, J. Mater. Sci. 13 (1978) 1084.
R. L. Bell, C. Graeme-Barber and T. G. Langdon, Trans. AIME 239 (1967) 1821.
T. G. Langdon, Met Trans. 3 (1972) 797.
R. L. Bell and T. G. Langdon, J. Mater. Sci 2 (1967) 313.
R. Z. Valiev and O. A. Kaibyshev, Phys. Stat. Sol. (a) 44 (1977) 65.
H. Ishikawa, F. A. Mohamed and T. G. Langdon, Phil. Mag. 32 (1975) 1269.
M. M. I. Ahmed and T. G. Langdon, Met. Trans. A 8A (1977) 1832.
J. E. Bird, A. K. Mukherjee and J. E. Dorn, “Quantitative Relation Between Properties and Microstructure,” edited by D. G. Brandon and A. Rosen (Israel Universities Press, Jerusalem, 1969) p. 255.
T. G. Langdon and F. A. Mohamed, Proceedings of the 4th International Conference on the Strength of Metals and Alloys, Vol. 1 (Laboratoire de Physique du Solide, ENSMIM, Nancy, France, 1976) p. 428.
S. C. Misro and A. K. Mukherjee, “Rate Processes in Plastic Deformation of Materials,” edited by J. C. M. Li and A. K. Mukherjee (American Society for Metals, Metals Park, Ohio, 1975) p. 434.
M. F. Ashby and R. A. Verrall, Acta Met. 21 (1973) 149.
J. H. Gittus, J. Eng. Mater. Technol. 99 (1977) 244.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Shei, S.A., Langdon, T.G. A microstructural examination of the flow behaviour of a superplastic copper alloy. J Mater Sci 16, 2988–2996 (1981). https://doi.org/10.1007/BF00540303
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00540303