Abstract
The previous paper, Part 1, reviewed surface and interfacial phenomena, including mechanisms of adhesion. The present paper, Part 2, reviews the mechanics and mechanisms of failure of adhesive joints and the effects of various operating environments on joint performance.
Similar content being viewed by others
References
A. J. Kinloch, J. Mater. Sci. 15 (1980) 2141.
R. S. Alwar and Y. R. Nagaraja, J. Adhesion 7 (1976) 279.
R. D. Adams, J. Coppendale and N. A. Peppiatt, J. Strain Anal. 13 (1978) 1.
E. W. Kuenzi and G. H. Stevens, U.S. Forest Products Laboratory, Report Number FPL-011 (1963).
A. N. Gent and P. B. Lindley, Proc. Roy. Soc. A249 (1958) 195.
Idem, Proc. Inst. Mech. Eng. 173 (1959) 111.
B. P. Holownia, J. Strain Anal. 7 (1972) 236.
L. J. Hart-Smith, in “Developments in Adhesives-2” edited by A. J. Kinloch (Applied Science Publishers, London, 1981) p. 1.
R. D. Adams, in “Developments in Adhesives-2” edited by A. J. Kinloch (Applied Science Publishers, London, 1981) p. 45.
N. L. Harrison and W. J. Harrison, J. Adhesion 3 (1972) 195.
O. Volkersen, Luftfahrtforsch 15 (1938) 41.
M. Goland and E. Reissner, J. Appl. Mech. 2 (1944) A-17.
C. Mylonas, Proc. Soc. Exp. Stress Anal. 12 (1954) 129.
I. Sneddon, in “Adhesion” edited by D. D. Eley (Oxford University Press, London, 1961) p. 207.
L. Greenwood, in “Aspects of Adhesion-5” edited by D. J. Alner (University of London Press, London, 1970) p. 40.
R. D. Adams, S. H. Chambers, P. J. A. Del Strother and N. A. Peppiatt, J. Strain Anal. 8 (1973) 52.
R. D. Adams and N. A. Peppiatt, ibid. 8 (1973) 134.
R. D. Adams and N. A. Peppiatt, ibid. 9 (1974) 185.
R. D. Adams, J. Coppendale and N. A. Peppiatt, in “Adhesion-2” edited by K. W. Allen (Applied Science Publishers, London, 1978) p. 105.
W. J. Renton and J. R. Vinson, J. Adhesion 7 (1975) 175.
Idem, Eng. Fract. Mechs. 7 (1975) 175.
Idem, J. Appl. Mech. 44 (1977) 101.
D. J. Allman, Mechs. Appl. Maths. 30 (1977) 415.
D. W. Cherry and N. L. Harrison, J. Adhesion 2 (1970) 125.
L. J. Hart-Smith, National Aeronautics and Space Administration, Washington D.C., Report Number CR-2218, 1974.
Idem, Douglas Aircraft Co., Long Beach, CA, Report Number 6059A, 1972.
Idem, Douglas Aircraft Co., Long Beach, CA, Report Number 6224, 1974.
Idem, Douglas Aircraft Co., Long Beach, CA, Report Number 6707, 1978.
Idem, Douglas Aircraft Co., Long Beach, CA, Report Number 6922, 1980.
P. J. Grant, “Jointing in Fibre Reinforced Plastics” (IPC, Guildford, 1978) p. 41.
C. Mylonas and N. A. De Bruyne, in “Adhesion and Adhesives” edited by W. A. De Bruyne and R. Houwink (Elsevier, Amsterdam, New York and Oxford, 1951) p. 91.
O. Ishai, D. Peretz and S. Gali, Expt. Mechs. 17 (1977) 265.
R. P. Penning, Engineering Sciences Data Unit, London, Report Number 78042, 1978.
O. Volkersen, Const. Met. 4 (1965) 3.
F. Erdogan and M. Ratnani, J. Adhesion 5 (1971) 378.
F. Thamm, ibid. 7 (1976) 301.
B. W. Cherry and N. L. Harrison, ibid. 2 (1970) 125.
M. D. Wright, Composites 9 (1978) 259.
G. N. Sage, in “Adhesion-3” edited by K. W. Allen (Applied Science Publishers, London, 1979) p. 123.
D. H. Kaelble, Trans. Soc. Rheol. 3 (1959) 161.
Idem, ibid. 4 (1960) 45.
Idem, ibid. 9 (1965) 135.
D. H. Kaelble and C. L. Ho, ibid. 18 (1974) 219.
J. J. Bikerman, J. Appl. Phys. 28 (1957) 1484.
Y. Inoue and Y. Kobatake, Appl. Sci. Res. A8 (1959) 321.
J. L. Gardon, J. Appl. Polymer Sci. 7 (1963) 625.
Idem, ibid. 7 (1963) 643.
G. J. Spies, Aircraft Eng. 30 March (1953) 2.
C. Jouwersma, J. Polymer Sci. 45 (1960) 253.
C. Mylonas, Proceedings of the 4th International Congress on Rheology, Providence, USA, 1963, Part 2 (Wiley Interscience, New York, 1965) p. 423.
J. J. Bikerman, “The Science of Adhesive Joints” (Academic Press, New York, 1968) p. 243.
W. C. Wake, “Adhesion and the Formulation of Adhesives” (Applied Science Publishers, London, 1976) p. 121.
A. W. Gent and G. R. Hamed, J. Adhesion 7 (1975) 91.
A. Crocombe and R. D. Adams, “Adhesion and Adhesives: Science, Technology and Applications” (Plastics and Rubber Institute, London, 1980) p. 10.1.
R. D. Adams and A. Crocombe, J. Adhesion 12 (1981) 127.
R. L. Lubkin and E. Reissner, Trans. ASME 78 (1956) 1213.
N. M. Kukovyakin and I. A. Skoryi, Russ. Eng. J. 52(4) (1972) 40.
L. P. Terekhova and I. A. Skoryi, Strength Mater. 4 (1973) 1271.
R. D. Adams and N. A. Peppiatt, J. Adhesion 9 (1977) 1.
Y. R. Nagaraja and R. S. Alwar, ibid. 10 (1979) 97.
H. Foulkes, J. Shields and W. C. Wake, ibid. 2 (1970) 254.
R. W. Bryant and W. A. Dukes, Brit. J. Appl. Phys. 16 (1965) 101.
Idem, Appl. Polymer Sympos. 3 (1966) 81.
R. T. Humpidge and B. J. Taylor, J. Sci. Instrum. 44 (1967) 457.
W. T. McCarvill and J. P. Bell, J. Adhesion 6 (1974) 185.
F. C. Bossler, N. C. Franzblau and J. L. Rutherford, J. Phys. E. 1 (1968) 829.
C. Mylonas, Proceedings of the VIIth International Congress on Applied Mechanics, London, Vol. 4 (1948) p. 137.
N. J. Dellois and O. Montoya, Appl. Polymer Sympos. 19 (1972) 417.
F. Swanson, Polymer Eng. Sci. 17 (1977) 122.
B. W. Cherry and K. W. Thomson, in “Adhesion-1” edited by K. W. Allen (Applied Science Publishers, London, 1977) p. 251.
S. E. Garf, V. I. Myshko and R. A. Iuchenko, Sintez-I-Fizikv-Khiniya Polimerov 13 (1974) 162.
Y. Inoue and Y. Kobatake, Appl. Sci. Res. A7 (1958) 53.
A. C. Elm, Official Digest 28 (1956) 752.
N. A. De Bruyne, J. Appl. Chem. 6 (1956) 303.
Y. Inoue and Y. Kobatake, Appl. Sci. Res. A7 (1958) 314.
Idem, Kolloid Z. 18 (1958) 18.
H. Danneberg, SPE J. 21 (1965) 669.
S. Gusman, Official Digest 34 (1962) 884.
J. J. Bikerman, in “The Science of Adhesive Joints” (Academic Press, New York and London, 1968) p. 192.
W. C. Wake, Trans. I.R.I. 35 (1959) 145.
J. A. Carlson and L. P. Sapetta, Adhesives Age 19(12) (1967) 26.
M. H. Stone, “Adhesion and Adhesives: Science Technology and Applications” (Plastics and Rubber Institute, London, 1980) p. 101.
L. Greenwood, T. R. Boag and A. S. McLaren, “Adhesion, Fundamentals and Practice” (McLaren, London, 1969) p. 273.
J. F. Knott, “Fundamentals of Fracture Mechanics” (Butterworths, London, 1973) p. 94.
J. G. Williams, “Stress Analysis of Polymers” 2nd edn (Ellis Horwood, Chichester, 1980) p. 291.
A. N. Gent, Rubb. Chem. Technol. 47 (1974) 202.
A. J. Kinloch and S. J. Shaw, in “Developments in Adhesives-2” edited by A. J. Kinloch (Applied Science Publishers, London, 1981) p. 82.
G. P. Anderson, S. J. Bennett and K. L. Devries, “Analysis and Testing of Adhesive Bonds” (Academic Press, New York and London, 1977).
A. A. Griffith, Phil. Trans. Roy. Soc. A221 (1920) 163.
E. Orowan, Rep. Progr. Phys. 12 (1948) 185.
G. R. Irwin, Appl. Mats. Res. 3 (1964) 65.
R. S. Rivlin and A. G. Thomas, J. Polymer Sci. 10 (1953) 291.
A. N. Gent, A. Ahagon, N. J. Kim and Y. Kumagi, Rubb. Chem. Technol. 48 (1975) 896.
J. R. Rice, in “Fracture — An Advanced Treatise” Vol. 2, edited by H. Liebowitz (Academic Press, New York and London, 1968) p. 191.
E. H. Andrews (ed), in “Developments in Polymer Fracture-1” (Applied Science Publishers, London, 1979) p. 1.
H. W. Westergaard, J. Appl. Mech. A 6 (1939) 46.
D. P. Rooke and D. J. Cartwright, “Compendium of Stress Intensity Factors” (HMSO, London, 1976) p. 7.
H. Tada, P. C. Paris and G. R. Irwin, “The Stress Analysis of Cracks Handbook” (Del Research Corporation, Hellertown, PA, 1973) p. 1.
F. Erdogan, Eng. Fract. Mech. 4 (1972) 811.
H. T. Corten, in “Fracture — An Advanced Treatise” Vol. 7, edited by H. Liebowitz (Academic Press, New York and London, 1972) p. 676.
J. G. Williams, Adv. Polymer Sci. 27 (1978) 68.
G. G. Trantina, J. Compos. Mater. 6 (1972) 192.
S. S. Wang, J. F. Mandell and F. J. McGarry, Int. J. Fract. 14 (1978) 39.
G. G. Trantina, J. Composite Mater. 6 (1972) 371.
K. Arin and F. Erdogan, Int. J. Eng. Sci. 9 (1971) 213.
E. Wu and R. L. Thomas, Proceedings of the 5th International Congress on Rheology, Kyoto, 1968 Vol. 1 (University Park Press, Baltimore, 1969) p. 575.
A. Piva and E. Viola, Eng. Fract. Mechs. 13 (1980) 143.
S. G. Sawyer and R. B. Anderson, ibid. 4 (1972) 605.
P. B. Lindley, J. Inst. Rubber Ind. 5 (1971) 243.
T. Hata, M. Gamo and Y. Doi, Kobienshi Kagaku 22 (1965) 152.
B. V. Deryaguin and N. A. Krotova, Doklady Akad. Nauk SSSR 61 (1948) 849.
A. N. Gent and G. R. Hamed, J. Appl. Polymer Sci. 21 (1977) 2817.
A. N. Gent and A. J. Kinloch, J. Polymer Sci. A-29 (1971) 659.
E. H. Andrews and A. J. Kinloch, Proc. Roy. Soc. A332 (1973) 385.
Idem, ibid. A332 (1973) 401.
Idem, J. Polymer Sci., Sympos. 46 (1974) 1.
E. H. Andrews and N. E. King, J. Mater. Sci. 11 (1976) 2004.
H. Danneberg, J. Appl. Polymer Sci. 14 (1961) 125.
B. M. Malyshev and R. L. Salganik, Int. J. Fract. Mechs. 1 (1965) 114.
M. L. Williams, J. Appl. Polymer Sci. 13 (1969) 29.
Idem, ibid. 14 (1970) 1121.
Idem, J. Adhesion 5 (1973) 81.
S. J. Bennett, K. L. Devries and M. L. Williams, Int. J. Fract. 10 (1974) 33.
G. P. Anderson, K. L. Devries and M. L. Williams, J. Coll. Interf. Sci. 47 (1974) 600.
G. P. Anderson, S. J. Bennett and K. L. Devries, “Analysis and Testing of Adhesive Bonds” (Academic Press, New York and London, 1977) p. 58.
E. Andrews and A. Stevenson, J. Mater. Sci. 13 (1978) 1680.
J. D. Burton, W. B. Jones and M. L. Williams, Trans. Soc. Rheol. 15 (1971) 39.
S. J. Bennett, G. P. Anderson and M. L. Williams, J. Appl. Polymer Sci. 14 (1970) 735.
M. L. Williams, K. L. Devries and R. R. Despain, J. Dent. Res. 52 (1973) 517.
G. P. Anderson, S. J. Bennett and K. L. Devries, “Analysis and Testing of Adhesive Bonds” (Academic Press, New York and London, 1977) p. 185.
M. L. Williams, J. Adhesion 3 (1972) 1.
T. Kunio and M. L. Williams, Proceedings of the International Symposium on the Science and Technology of Space, Tokyo, Japan, August 1969 (1970) p. 217.
K. L. Johnson, K. Kendall and A. D. Roberts, Proc. Roy. Soc. A324 (1971) 301.
D. Maugis and M. Barquins, J. Phys. D 11 (1978) 1989.
A. D. Roberts and A. G. Thomas, in “Adhesion-1” edited by K. W. Allen (Applied Science Publishers, London, 1977) p. 141.
K. N. G. Fuller and D. Tabor, Proc. Roy. Soc. A345 (1975) 327.
E. J. Ripling, S. Mostovoy and P. L. Patrick, Mat. Res. Stds 4 (1964) 129.
Idem, A.S. T.M., S. T.P. 360 (1964) 5.
S. Mostovoy and E. J. Ripling, J. Appl. Polymer Sci. 10 (1966) 1351.
S. Mostovoy, P. B. Crosley and E. J. Ripling, J. Mater. 2 (1965) 661.
S. Mostovoy and E. J. Ripling, Report Number N00019-75-C-0271, Naval Air Systems Command, Washington, U.S.A., 1975.
T. R. Brussat, S. T. Chin and S. Mostovoy, Report Number TR-77-162, Air Force Materials Laboratory, Dayton, U.S.A., 1977.
W. D. Bascom, J. L. Bitner, R. J. Moulton and A. R. Siebert, Composites 11 (1980) 9.
Y. W. Mai, J. Adhesion 7 (1975) 141.
E. H. Andrews and A. Stevenson, in “Adhesion-3” edited by K. W. Allen (Applied Science Publishers, London, 1979) p. 81.
E. H. Andrews and A. Stevenson, J. Adhesion 11 (1980) 17.
M. L. Williams, Int. J. Fract. Mechs. 10 (1974) 33.
W. D. Bascom, R. L. Cottington and C. O. Timmons, Appl. Polymer Symposium 32 (1977) 165.
D. R. Mulville, D. L. Hunston and P. W. Mast, J. Eng. Mat. Technol. 100 (1978) 25.
Y. W. Mai and A. S. Vipond, J. Mater. Sci. 13 (1978) 2280.
A. D. Jonath, in “Adhesion and Adsorption of Polymers” Part A, edited by L. H. Lee (Plenum Press, New York, 1980) p. 175.
W. D. Bascom, C. O. Timmons and R. L. Jones, J. Mater. Sci. 10 (1975) 1037.
W. D. Bascom and J. Oroshnik, ibid. 13 (1978) 1411.
R. A. Gledhill, A. J. Kinloch, S. Yamini and R. J. Young, Polymer 19 (1978) 574.
R. A. Gledhill and A. J. Kinloch, Polymer Eng. Sci. 19 (1979) 82.
W. D. Bascom, R. L. Cottington, R. L. Jones and P. Peyser, J. Appl. Polymer Sci. 19 (1975) 2545.
W. D. Bascom and R. L. Cottington, J. Adhesion 7 (1976) 333.
W. D. Bascom, R. L. Cottington and C. O. Timmons, Naval. Eng. J. 88 (1976) 73.
D. L. Hunston, J. L. Rushford, J. L. Bitner and J. Oroshnik, J. Elastomers Plast. 12 (1980) 133.
A. J. Kinloch and S. J. Shaw, J. Adhesion 12 (1981) 59.
D. L. Hunston, J. L. Bitner, W. S. Rose, J. L. Rushford and C. K. Riew, ibid. 13 (1981) to be published.
J. N. Sultan and F. J. McGarry, Polymer Eng. Sci. 13 (1973) 29.
R. Drake and A. Siebert, SAMPE Quart. 6(4) (1975) 11.
S. Mostovoy and E. J. Ripling, Appl. Polymer Symp. 19 (1972) 395.
M. Takashi, K. Ogawa, R. Katita and T. Kuno, Proceedings of the Japan Congress on Materials Research 16 (1973) 211.
R. A. Gledhill, A. J. Kinloch and S. J. Shaw, J. Mater. Sci. 14 (1979) 1769.
S. Mostovoy and E. J. Ripling, J. Appl. Polymer Sci. 13 (1979) 1083.
E. J. Ripling, S. Mostovoy and C. Bersch, J. Adhesion 3 (1971) 145.
A. J. Kinloch, R. A. Gledhill and W. A. Dukes, in “Adhesion, Science and Technology” edited by L. H. Lee (Plenum Press, New York, 1975) p. 597.
B. W. Cherry and K. W. Thomson, “Fracture Mechanics and Technology (Sijthoff and Nordoff, Netherlands, 1971) p. 723.
A. J. Kinloch, J. Adhesion 10 (1979) 193.
R. A. Gledhill, A. J. Kinloch and S. J. Shaw, ibid. 11 (1980) 3.
J. C. McMillan, in “Developments in Adhesives-2” edited by A. J. Kinloch (Applied Science Publishers, London, 1981) p. 243.
R. O. Embewle, B. H. River and J. A. Koutsky, Wood Fiber 11 (1979) 197.
Idem, ibid. 12 (1980) 40.
D. R. Mulville and R. Vaishnav, J. Adhesion 7 (1975) 215.
M. Takashi, K. Ogawa and T. Kumo, Proceedings of the Japan Congress on Materials Research, Vol. 17, 1974, p. 192.
R. L. Patrick, J. A. Brown, N. M. Cameron and W. G. Gehman, Appl. Polymer Sympos. 16 (1971) 87.
R. L. Patrick (ed), “Treatise on Adhesion and Adhesives” Vol. 4 (Marcel Dekker, New York, 1973) 163.
R. C. Wilcox and W. A. Jemain, Polymer Eng. Sci. 13 (1973) 40.
R. W. Bryant and W. A. Dukes, Aeronautic and Space Engineering and Manufacturing Meeting, Los Angeles, October 1967, Paper No. 670855 (SAE, New York, 1968).
H. P. Meissner and G. H. Baldauf, Trans. ASME 73 (1951) 697.
N. Bredzs and H. Schwartzbart, Welding J. (Welding Res. Suppl.) (1956) 610.
H. P. Meissner and E. W. Merrill, ASTM Bull. 151 (1948) 80.
S. W. Lososki and G. Kruas, J. Polymer Sci. 18 (1955) 359.
A. G. H. Dietz, ASTM, STP 194 (1957) 19.
J. J. Bikerman and C. R. Huang, Trans. Soc. Rheol. 3 (1959) 5.
J. J. Bikerman, “The Science of Adhesive Joints” (Academic Press, New York and London, 1968) p. 273.
W. A. Dukes and R. W. Bryant, J. Adhesion 1 (1969) 48.
W. C. Wake, in “Adhesion” edited by D. D. Eley (Oxford University Press, London, 1961) p. 191.
A. N. Gent, J. Polymer Sci. A2 (1974) 283.
P. D. Hilton and G. D. Gupta, “Design and Engineering Conference” Philadelphia, April 1973, Paper No. 73-De-21 (ASME, Philadelphia, 1973).
R. D. Adams and J. Coppendale, J. Adhesion 10 (1979) 49.
N. A. Debruyne, Aircraft Eng. 16 (1944) 115.
Idem, ibid. 16 (1944) 140.
K. Wellinger and U. Rembold, VDI Zeitschrift 100 (1958) 41.
A. N. Gent and G. R. Hamed, Polymer Eng. Sci. 17 (1977) 462.
J. Johnston, Adhesives Age 11(4) (1968) 20.
D. W. Aubrey, G. N. Welding and T. Wong, J. Appl. Polymer Sci. 13 (1969) 2193.
T. Igarashi, ibid. 19 (1975) 2129.
F. Yamamoto, S. Yamakawa and S. Tsuru, J. Polymer Sci. Polymer Phys. Ed. 18 (1980) 1847.
D. Satas and F. Egan, Adhesives Age 9(8) (1966) 22.
G. J. Lake and A. Stevenson, J. Adhesion 12 (1981) 13.
D. W. Aubrey, T. A. Jackson and J. D. Smith, J. Inst. Rubber. Ind. 3 (1969) 265.
K. Kendall, J. Phys. D. Appl. Phys. 11 (1978) 1519.
R. W. Atkins, A. J. Kinloch and S. J. Shaw, unpublished work, 1980.
D. H. Kaelble, J. Colloid Sci. 19 (1969) 102.
D. H. Kaelble and R. S. Reylek, J. Adhesion 1 (1969) 124.
A. N. Gent and R. P. Petrich, Proc. Roy. Soc. A310 (1969) 433.
D. W. Aubrey and M. Sherriff, J. Polymer Sci. Polymer Chem. Ed. 18 (1980) 2597.
R. Bates, J. Appl. Polymer Sci. 20 (1976) 2941.
M. L. Williams, R. F. Landel and J. D. Ferry, J. Amer. Chem. Soc. 77 (1955) 3701.
D. W. Aubrey, in “Adhesion-3” edited by K. W. Allen (Applied Science Publishers, London, 1979) p. 191.
J. L. Cotter, Revs. High Temp. Mat. 3(4) (1973) 277.
J. C. Bolger, in “Treatise on Adhesion and Adhesives” Vol. 3, edited by R. L. Patrick (Marcel Dekker, New York, 1973) p. 1.
R. E. Yaeger, Appl. Polymer Sympos. 3 (1969) 369.
S. R. Sandler and F. R. Berg, J. Appl. Polymer Sci. 9 (1965) 3909.
A. F. Lewis, R. A. Kinmonth and R. P. Kreahling, J. Adhesion 3 (1972) 249.
A. F. Lewis, Adhesives Age 15(6) (1972) 38.
K. W. Allen and M. E. R. Shanahan, J. Adhesion 7 (1975) 161.
Idem, ibid. 8 (1976) 43.
W. Spath, Adhäsion 17(10) (1973) 348.
V. Rayatskas and V. Pekarskas, J. Appl. Polymer Sci. 20 (1976) 1941.
J. P. Thomas, Appl. Polymer Sympos. 3 (1969) 109.
W. C. Wake, K. W. Allen and S. M. Dean, in “Elastomers: Criteria for Engineering Design” edited by C. Hepburn and R. J. W. Reynolds (Applied Science Publishers, London, 1979) p. 311.
R. A. Gledhill and A. J. Kinloch, Polymer 17 (1976) 727.
J. R. Romanko and W. G. Knauss, in “Developments in Adhesives-2” edited by A. J. Kinloch (Applied Science Publishers, London, 1981) p. 173.
J. R. Beatty and E. C. Dalguish, Rubb. Chem. Technol. 47 (1974) 188.
R. J. Kuhbander and T. J. Aponyi, Adhesives Age 19(9) (1976) 27.
J. A. Marceau, ibid. 21(4) (1978) 37.
J. Peterka, Adhäsion 17 (1973) 288.
W. Spath, ibid. 16 (1972) 416.
W. D. Bascom and S. Mostovoy, Amer. Chem. Soc., Organic Coatings Plastics Chem., Prepr. 38 (1978) 152.
A. J. Kinloch and J. G. Williams, J. Mater. Sci. 15 (1980) 987.
A. J. Kinloch, Metal Sci. 14 (1980) 305.
S. Mostovoy and E. J. Ripling, in “Adhesion, Science and Technology” Part B, edited by L. H. Lee (Plenum Press, New York, 1975) p. 513.
N. J. Delollis, Adhesives Age 20(9) (1977) 41.
J. D. Minford, ibid. 21(3) (1978) 17.
W. D. Bascom, ibid. 22(4) (1979) 28.
R. J. Schliekelmann (ed), “Bonded Joints and Preparation for Bonding” (NATO-AGARD, Lecture Series 102, 1979).
R. A. Gledhill and A. J. Kinloch, J. Adhesion 6 (1974) 315.
D. H. Kaelble, J. Appl. Polymer Sci. 18 (1974) 1869.
D. K. Owens, ibid. 14 (1970) 1725.
M. Gettings, F. S. Baker and A. J. Kinloch, ibid. 21 (1977) 2375.
A. N. Gent and J. Schultz, J. Adhesion 3 (1972) 281.
S. N. Zhurkov and E. E. Tomashevsky, “Physical Basis of Yield and Fracture” (Institute of Physics, London, 1966) p. 200.
S. N. Zhurkov and U. E. Korsukov, J. Polymer Sci. Polymer Phys. 12 (1974) 385.
D. W. Levi, R. F. Wegman, M. C. Ross and E. A. Garnis, SAMPE Quart. 7(3) (1971) 1.
W. D. Bascom, S. T. Gadomski, C. M. Henderson and R. L. Jones, J. Adhesion 8 (1977) 213.
F. J. Riel, SAMPE J. 7 (1971) 16.
J. L. Cotter, in “Developments in Adhesives-1” edited by W. C. Wake (Applied Science Publishers, London, 1977) p. 1.
R. W. Shannon and E. W. Thrall, J. Appl. Polymer Sci., Appl. Polymer Sympos. 32 (1977) 131.
J. S. Noland, “Adhesion, Science and Technology” edited by L. H. Lee (Plenum Press, New York, 1975) p. 413.
J. D. Venables, D. K. McNamara, T. S. Sun, B. Datchek and J. M. Chen, “Structural Adhesives and Bonding Technology” (Technical Conference Associates, El Segundo, California, 1979) p. 12.
T. S. Sun, J. M. Chen, J. D. Venables and R. Hopping, Appl. Surf. Sci. 1 (1978) 202.
A. J. Kinloch and N. J. Smart, J. Adhesion 12 (1981) 23.
J. D. Minford, Adhesives Age 17(7) (1974) 24.
J. A. Smith and W. E. Martinsen, Amer. Ceram. Soc. Bull. 52 (1973) 855.
J. C. Comyn, in “Developments in Adhesives-2” edited by A. J. Kinloch (Applied Science Publishers, London, 1981) p. 279.
D. M. Brewis, J. Comyn, B. C. Cope and A. C. Moloney, Polymer 21 (1980) 344.
J. Comyn, D. M. Brewis, R. J. A. Shalash and J. L. Tegg, in “Adhesion-3” edited by K. W. Allen (Applied Science Publishers, London, 1979) p. 13.
D. M. Brewis, J. Comyn and J. L. Tegg, Int. J. Adhes. Adhesives 1 (1980) 35.
D. M. Brewis, J. Comyn, B. C. Cope and A. C. Moloney, Polymer 21 (1980) 1477.
W. Althof, Nat. SAMPE Tec. Conf. 11 (1979) 309.
Idem, Aluminium 55 (1979) 600.
D. M. Brewis, J. Comyn, A. C. Moloney and J. L. Tegg, Eur. Polymer J. 17 (1981) 127.
B. W. Cherry and K. W. Thomson, “Fracture Mechanics and Technology” (Sijthoff and Nordoff, Netherlands, 1977) p. 723.
J. A. Barrie, in “Diffusion in Polymers” edited by J. Crank and G. S. Park (Academic Press, New York and London, 1968) p. 259.
M. Getting and A. J. Kinloch, J. Mater. Sci. 12 (1977) 2049.
Idem, Surf. Interface Anal. 1 (1980) 189.
J. C. Bolger and A. S. Michaels, in “Interface Conversion for Polymer Coatings” edited by P. Weiss and G. D. Cheever (Elsevier, Amsterdam, New York and Oxford, 1968) p. 3.
B. F. Lewis, W. M. Browser, J. L. Horn, T. Luu and W. H. Weinberg, J. Vac. Sci. Technol. 11 (1974) 262.
J. C. McMillan and J. T. Quinlivan, SAMPE Quart. 7(3) (1976) 13.
A. W. Bethune, SAMPE J. 11(4) 1975) 4.
J. D. Venables, D. K. McNamara, J. M. Chen, T. S. Sun and R. L. Hopping, Appl. Surf. Sci. 3 (1979) 88.
W. Brockman and H. Kollek, Proceedings of the 23rd National SAMPE Symposium, 1978 (SAMPE, San Francisco, 1978) p. 1119.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kinloch, A.J. The science of adhesion. J Mater Sci 17, 617–651 (1982). https://doi.org/10.1007/BF00540361
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00540361