Abstract
Metallic-glass layers were produced on metallic bulk material using laser or electron beam melting. The requisite composition (FeCr12)80(C,B)20 for steel and Ni x Nb(100−x ), (x = 30 to 60) for niobium was obtained by coating the substrate prior to melting. X-ray, scanning electron microscopy, transmission electron microscopy and calorimetric methods were used to demonstrate and investigate the amorphous nature of the surface layer.
Similar content being viewed by others
References
H. A. Davies, G. B. Lewis and J. W. Donald, Proceedings of the Conference on Rapid Solidification Processing, Reston, Virginia, 1977 (Claitor, Baton Rouge, 1978).
B. Cantor (ED), “Rapidly Quenched Metals III” (Metals Society, London, 1978).
H. F. Cline and T. R. Anthony, J. Appl. Phys. 48 (1977) 3888.
H. W. Bergmann, H. U. Fritsch and G. Hunger, J. Mater. Sci. 16 (1981), to be published.
H. W. Bergmann and B. L. Mordike, Z. Metallkde. 71 (1980) 658.
Idem, Proceedings of the Conference on Metallic Glasses, Science and Technology, Budapest, July 1980.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bergmann, H.W., Mordike, B.L. Laser and electron-beam melted amorphous layers. J Mater Sci 16, 863–869 (1981). https://doi.org/10.1007/BF00542728
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00542728