Abstract
Transparent Sb-doped SnO2 films were prepared at 600° C on glass substrates by thermal decomposition of tin 2-ethylhexanoate and antimony tributoxide. The films 100 to 300 nm thick, which are composed of fine particles, were very smooth. The films showed no preferred orientation. The minimum resistivity (2.1×10−2Ω cm) was attained at a concentration of 8 at% Sb on the substrate precoated with SiO2. The transmission of these films was about 80% over a wavelength range from 0.4 to 2.0 μm.
Similar content being viewed by others
References
J. L. Vossen, Phys. Thin Films 9 (1977) 1.
J. P. Marton and D. A. Lepic, J. Electrochem. Soc. 123 (1976) 234.
E. Shanthi, A. Banerjee and K. L. Chopra, Thin Solid Films 88 (1982) 93.
J. C. Manifacier, J. P. Fillard and J. M. Bind, ibid. 77 (1981) 67.
R. Muto and S. Furuuchi, Oyo Butsuri 41 (1972) 134.
J. Kane, H. P. Schweizer and W. Kern, J. Electrochem. Soc. 122 (1975) 1144.
Y. Katsube and S. Katsube, Shinku Kagaku 9 (1966) 443.
H. W. Lehmann and R. Widmer, Thin Solid Films 27 (1975) 359.
K. Suzuki and M. Mizuhashi, ibid. 97 (1982) 119.
T. Matsushita, T. Sekiya and I. Yamai, J. Jpn. Chem. Soc. 1972 (1982) 880.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tsunashima, A., Yoshimizu, H., Kodaira, K. et al. Preparation and properties of antimony-doped SnO2 films by thermal decomposition of tin 2-ethylhexanoate. J Mater Sci 21, 2731–2734 (1986). https://doi.org/10.1007/BF00551480
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00551480