Abstract
The weldability of aluminium-lithium alloys is reviewed with emphasis on alloys that are being commercialized: 2090, 8090 and Weldalite™ 049. These alloys are weldable, although hotcracking susceptibility has been reported for 2090 and 8090 when welded with certain conventional filler alloys. Mechanical property data from weldments made by several techniques are emphasized. Weld-zone porosity problems, discussed at length in a 1985 review in this journal, have largely been controlled by proper weld pretreatment and gas shielding. Interest in the weldability of aluminium-lithium alloys has taken on increased significance because of their potential to reduce the weight of space launch systems, whose fabrication most often involves welding.
Similar content being viewed by others
References
G. G. Wald, NASA Contractor Report 16576, NASA, Washington, DC (1981).
R. Grimes, T. Davis, H. J. Saxty andJ. E. Fearon, “Progress to Aluminum-Lithium Semi-Fabricated Products”, Journal de Physique, 4th International Aluminum Conference, 10–12 June 1987, Paris, France, edited by G. Champier, B. Dubost, D. Miannay, L. Sabetay (Les editions de Physique, Paris, 1987) pp. C3-11–C3-24.
P. E. Bretz, “Alithalite Development and Production”, Journal de Physique, 4th International Aluminum Conference, 10–12 June 1987, Paris, France, edited by G. Champier, B. Dubost, D. Miannay, L. Sabetay (Les editions de Physique, Paris, 1987) pp. C3-25–C3-31.
G. Leroy, R. Mace, D. Marchive, P. Meyer, R. Nossent andF. Schlecht, “Status Report on the Development of Aluminum-Lithium at Pechiney”. Journal de Physique, 4th International Aluminum Conference, 10–12 June 1987, Paris, France, edited by G. Champier, B. Dupost, D. Miannay, L. Sabetay (Les editions de Physique, Paris, 1987) pp. C3-33–C3-42.
J. R. Pickens, F. H. Heubaum, L. S. Kramer, T. J. Langan andK. S. Kumar, “Ultra-High Strength Weldable Al-Li Alloy Development by Martin Marietta Laboratories”, in Proceedings of M. L. Handbook 5 Meeting, 27 April 1988 (Industry City, California, 1988).
J. R. Pickens, F. H. Heubaum, L. S. Kramer, T. J. Langan andK. S. Kumar,Met. Trans. A., submitted.
Panel discussion on Al-Li alloys. AGARD Meeting. Mierlo. Netherlands, 3–5 October, 1988.
J. R. Pickens,J. Mater. Sci. 20 (1985) 4247.
I. N. Fridlyander. Brit. Pat. 1172736 (1967).
V. A. Vedoseev, V. I. Ryazansev, N. V. Shiryaesa andYu. P. Arbuzov,Welding Prod. 12 (1979) 19, translation ofSvar. Proizvod. (6) (1978) 15.
V. N. Mironenko, V. S. Evstifeev andS. A. Korshunkova,Welding Prod. 24 (12) (1977) 44.
G. E. Kainova andT. I. Malinkina,Met. Sci. Heat Treat. Met. (Metall. Oved. Termi, Obrab. Met.) (2) (1969) 22, translation 104.
J. R. Pickens, T. J. Langan andE. Barta, “The Weldability of Al-5Mg-2Li-0.1Zr Alloy 01420”,Aluminum-Lithium III, edited by C. Baker, P. J. Gregson, S. J. Harris, C. J. Peel, (Institute of Metals Pub., London, 1986) pp. 137–147.
J. W. Hackett, Martin Marietta Manned Space Systems, Michoud, Los Angeles, personal communication.
E. Cross, PhD thesis, Colorado School of Mines (1986).
K. Kamada, H. Kayano, Y. Baba, T. Uno, H. Yoshida andY. Shoji,J. Nucl. Mater. 133,134 (1985) 897.
K. Namba andH. Sano,Kei Kiuzo Ku Yosetsu (J. Light Metals Weld. Const.) 24 (1986) 243.
T. Saida andK. Matsumoto, Jpn. Pat. S59-255718, Patent J. No. S61-136651 (24) (1986) 313.
S. Kuo, “Welding Metallurgy and Weldability of High Strength Aluminum Alloys”, Welding Research Council Bulletin, No. 320, December, 1986.
I. N. Fridlyander andV. S. Sundler,Metallovedenie i termicheskaya abrabotka Metallov (MuTOM) 8 (1988) 74.
J. R. Pickens, F. H. Heubaum andL. S. Kramer, Martin Marietta Laboratories, Baltimore, Maryland, USA, unpublished research.
J. M. Brupbacher, L. Christodoulou andD. C. Nagle, US Pat. 4710348, December 1, 1987.
J. R. Pickens, J. S. Ahearn, R. O. England andD. C. Cooke, “High-Strength Weldable Aluminum Alloys made from Rapidly Solidified Powder”, in “High Strength Powder Metallurgy Aluminum Alloys II”, AIME-TMS Conference Proceedings, edited by G. J. Hildeman and M. J. Koczak, Toronto, 15–16 October, 1985 (AIME-TMS, 1985) pp. 371–393.
J. R. Pickens, J. S. Ahearn, R. O. England andD. C. Cooke, “Welding of Rapidly Solidified Powder Metallurgy Aluminum Alloys”, End-of-Year Report on Contract N00167-84-C-0099, Martin Marietta Laboratories, Baltimore, Maryland, December, 1985.
J. R. Pickens, J. S. Ahearn, R. O. England, D. C. Cooke, T. J. Langan andW. C. Moshier, “Welding of Rapidly Solidified Powder Metallurgy Aluminum Alloys”, Second End-of-Year Report on DARPA Contract N00167-84-C-0099, Martin Marietta Laboratories, Baltimore, Maryland, December, 1986.
K. G. Kent,Metall. Rev. 147 (1970) 135–6.
R. O. England andJ. R. Pickens, “Fabrication of Mark 50 Lightweight Torpedo Bodies Using Rapidly Solidified Powder Metallurgy Alloy MML 1. Martin Marietta Laboratories Report MML TR 87-87c, report on Navy Contract N00167-84-C-0099, December, 1987.
M. F. Gittos, “Gas Shielded Arc Welding of the Al-Li Alloy 8090”. Report 7944.01/87/556.2 (The Welding Institute, Abingdon, Cambridge, UK, May, 1987).
P. T. Houlcroft,Brit. Weld. J. 1 (1954) 468.
E. Wilner. Lockheed Missiles and Space Co., Sunnyvale, California, personal communication, April, 1988.
M. R. Edwards andV. E. Stoneham,J. de Phys. Coll. C3 (Suppl. au 48(a)) (1987) C3–293.
M. H. Skillingberg, “Fusion Welding of Al-Li-Cu-(Mg)-Zr Plate”, in “Aluminum Technology 86, Proceedings of the International Conference”, London, 11–13 March 1986 (1986) pp. 509–515.
R. P. Martukanitz, C. A. Natalie andJ. O. Knoefel,J. Met. 39 (1987) 38.
R. P. Martukanitz, R. H. Stevens andL. R. Johnson. “Microstructural and Microhardness Characterizations of a Gas Metal Arc Welded Aluminum Lithium Alloy”, in “Microstructural Science”, Vol. 14, edited by M. R. Louthan Jr, I. Lemay and G. F. Vander Voort (ASM International, 1987) pp. 53–64.
W. D. Gaw. Presentation at Westec '88, Los Angeles Convention Center, 24 March, 1988.
J. T. Abe, W. D. Gaw, J. E. Collipriest andJ. J. Martin. Air Force Avionics Laboratory Report AFAL TR-87-055, Contract F04611-85-C-0052, AD-B117 300, August. 1987.
M. J. Dvornak. MS thesis. Center for Welding Research. Colorado School of Mines, Golden, Colorado, 21 January, 1988.
T. Marsico andR. Kossowsky. “Feasibility of Laser Welding Aluminum-Copper-Lithium Alloy 2090 T8E41”, report from the Applied Research Laboratory, The Pennsylvania State University, 28 June, 1988.
J. R. Pickens, F. H. Heubaum, L. S. Kramer andK. S. Kumar. “Ultra High Strength Weldable Aluminum Lithium Alloys”, patent pending USA.
J. R. Pickens, F. H. Heubaum, T. J. Langan andL. S. Kramer, “Al-4.5 to 6.3Cu-1.3Li-0.4Ag-0.4Mg-0.14Zr Alloy WeldaliteTM 049”, in Proceedings of the Fifth International Aluminum-Lithium Conference, Williamsburg, Virginia, 27–31 March, 1989, edited by Edgar A. Starke Jr and T. H. Sanders (Materials and Components Engineering, Warley, UK, 1989) pp. 1397–1411.
L. S. Kramer, F. H. Heubaum andJ. R. Pickens, “The Weldability of High-Strength Al-Cu-Li Alloys”,ibid.in pp. 1415–1424.
W. T. Tack andL. W. Loechel, “WeldaliteTM 049: Applicability of a New High Strength, Weldable Al-Li-Cu Alloy”,ibid.in pp. 1457–1467.
J. C. Huang andA. J. Ardell,Acta Metall. 36 (1988) 2995.
J. C. Huang andA. J. Ardell, “Aluminum Technology '86”, edited by T. Sheppard (Institute of Metals, London, 1986) pp. 434.
J. W. Hackett andW. M. MacFarlane, Data contained in a presentation by J. W. Hackett and J. R. Pickens, Naval Air Development Center Conference on Aluminum Alloys, Valley Forge, Pennsylvania, 25 October, 1988.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Pickens, J.R. Recent developments in the weldability of lithium-containing aluminium alloys. J Mater Sci 25, 3035–3047 (1990). https://doi.org/10.1007/BF00587647
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00587647