Skip to main content
SpringerLink
Log in

Shaping of metal powders - A survey

  • Theory and Technology of the Component Formation Process
  • Published:
Soviet Powder Metallurgy and Metal Ceramics Aims and scope

Conclusions

  1. 1.

    The principles of a discrete contact theory of pressing have been formulated.

  2. 2.

    Extensive experimental data have been accumulated on standard pressing techniques (pressing in closed die sets, hydrostatic and hot pressing).

  3. 3.

    Special equipment has been built to meet the requirements of powder metallurgy; experience with its use has demonstrated, however, that the designs of the existing presses require modification.

  4. 4.

    Investigations of new shaping techniques (vibratory, impact, hydrodynamic, explosive) have laid foundations for their wide application in industry.

  5. 5.

    Too little attention is being paid to such shaping techniques as pressing with simultaneous spark sintering, ultrasonic pressing, hot casting, shaping in a magnetic field, etc. Work conducted with the aim of studying and employing such techniques will promote further technical progress in our country.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Literature cited

  1. A. N. Nikolaev, Poroshkovaya Met., No. 3, 3 (1962).

    Google Scholar 

  2. N. F. Kunin and B. D. Yurchenko, Poroshkovaya Met., No. 6, 3 (1963).

    Google Scholar 

  3. N. F. Kunin and B. D. Yurchenko, Poroshkovaya Met., No. 6, 1 (1964).

    Google Scholar 

  4. M. Yu. Bal'shin, Powder Metallurgy [in Russian], Mashgiz, Moscow (1948).

    Google Scholar 

  5. M. Yu. Bal'shin, Poroshkovaya Met., No. 12, 20 (1965).

    Google Scholar 

  6. M. Yu. Bal'shin, in: Powder Metallurgy and Metal Treatment, Transactions of a Scientific-Technical Seminar [in Russian], Erevan (1965), p. 50.

  7. G. M. Zhdanovich, Some Theoretical Aspects of the Pressing Process of Metal Powders and Their Mixtures [in Russian], Minsk (1960).

  8. O. V. Roman, Poroshkovaya Met., No. 10, 21 (1967).

    Google Scholar 

  9. V. A. Kuz'menko, Sonic and Ultrasonic Vibrations in the Dynamic Testing of Materials [in Russian], Izd-vo Naukova Dumka, Kiev (1965).

    Google Scholar 

  10. O. V. Roman and V. E. Perel'man, in: Powder Metallurgy, Transactions of the Ninth All-Union Conference on Powder Metallurgy [in Russian], Riga (1968).

  11. P. Duwez and L. Zwell, J. Metals, Trans.,1, No. 2, 137 (1949).

    Google Scholar 

  12. I. D. Radomysel'skii, G. G. Serdyuk, and Yu. V. Kovalev, Poroshkovaya Met., No. 9, 6 (1966).

    Google Scholar 

  13. E. B. Lozhechnikov and L. S. Boginskii, in: Powder Metallurgy, Transactions of the Ninth All-Union Conference on Powder Metallurgy [in Russian], Riga (1968), p. 342.

  14. L. S. Rabinovich, I. D. Radomysel'skii, V. N. Klimenko, and E. L. Pechentkovskii, Poroshkovaya Met., No. 2, 50 (1967).

    Google Scholar 

  15. Yu. N. Fadeev and N. Z. Pozdnyak, in: Powder Metallurgy, Transactions of the Ninth All-Union Conference on Powder Metallurgy [in Russian], Riga (1968), p. 96.

  16. B. A. Borok, V. I. Gavrilin, et al., Technology and Installations for Hydrostatic Pressing [in Russian], VINITI (1959).

  17. B. A. Borok, in: Powder Metallurgy [in Russian], Yaroslavl' (1956).

  18. G. A. Il'in and L. D. Gol'dman, in: Powder Metallurgy, Transactions of the Ninth All-Union Conference on Powder Metallurgy [in Russian], Riga (1968), p. 42.

  19. G. A. Meerson, S. S. Kiparisov, and Rifan Abdel' Khamid, Proceedings of the Second International Conference on Powder Metallurgy, Prague (1966).

  20. S. S. Kiparisov and Rifan Abdel' Khamid, in: Powder Metallurgy, A Collection of Papers [in Russian], Minsk (1966).

  21. G. A. Meerson, S. S. Kiparisov, and A. M. Umanskii, in: Powder Metallurgy, Transactions of the Ninth All-Union Conference on Powder Metallurgy [in Russian], Riga (1968), p. 262.

  22. “Improved shaping methods raise the quality of powder metallurgy parts,” Metalworking Production,5 (1967).

  23. I. G. Shatalova, I. S. Gorbunov, and V. I. Likhtman, Physicochemical Principles of the Vibratory Densification of Powder Materials [in Russian], Moscow (1965).

  24. V. V. Ivashchenko, Poroshkovaya Met., No. 2, 15 (1966).

    Google Scholar 

  25. É. I. Voloshin — Chelpan, in: Powder Metallurgy, Transactions of the Ninth All-Union Conference on Powder Metallurgy [in Russian], Riga (1968), p. 53.

  26. O. V. Roman and E. A. Doroshkevich, in: Powder Metallurgy, Transactions of the Ninth All-Union Conference on Powder Metallurgy [in Russian], Riga (1968), p. 68.

  27. O. V. Roman and E. A. Doroshkevich, Poroshkovaya Met., No. 6, 6 (1966).

    Google Scholar 

  28. O. V. Roman and E. A. Doroshkevich, in: Transactions of the Second International Conference on Powder Metallurgy, Prague (1966).

  29. G. A. Charest, in: Transactions of the Second International Conference on Powder Metallurgy, Vol. 1, Prague (1966).

  30. Yu. G. Dorofeev, D. I. Kritin, et al., Secondary Sintered Materials from Powder and Swarf [in Russian], Vol. 173, Novocherkassk (1967), p. 8.

  31. Yu. G. Dorofeev, Secondary Sintered Materials from Powder and Swarf [in Russian], Vol. 173, Novocherkassk (1967), p. 3.

  32. Yu. G. Dorofeev, in: Applications of the Dynamic Pressing Technique in Swarf and Powder Metallurgy [in Russian], Rostov (1966), p. 5.

  33. Yu. G. Dorofeev and N. T. Zherditskii, in: Applications of the Dynamic Pressing Technique in Swarf and Powder Metallurgy [in Russian], Rostov (1966), p. 77.

  34. L. N. Afanas'ev and O. V. Roman, Secondary Sintered Materials from Powder and Swarf [in Russian], Vol. 173, Novocherkassk (1967), p. 71.

  35. L. N. Afanas'ev, O. V. Roman, and P. A. Vityaz', in: Powder Metallurgy [in Russian], Minsk (1966).

  36. L. N. Afanas'ev and O. V. Roman, in: Powder Metallurgy, Transactions of the Ninth All-Union Conference on Powder Metallurgy [in Russian], Riga (1968), p. 118.

  37. A. P. Bogdanov and O. V. Roman, in: Powder Metallurgy [in Russian], Minsk (1966).

  38. A. P. Bogdanov, G. K. Karkavaya, and O. V. Roman, in: Powder Metallurgy, Transactions of the Ninth All-Union Conference on Powder Metallurgy [in Russian], Riga (1968), p. 63.

  39. A. G. Dobrovol'skii and É. Ya. Popichenko, Poroshkovaya Met., No. 9, 45 (1965).

    Google Scholar 

  40. A. G. Dobrovol'skii and N. V. Nazarchuk, Poroshkovaya Met., No. 5, 1 (1966).

    Google Scholar 

  41. V. V. Ivashchenko and T. M. Golubev, in: Powder Metallurgy [in Russian], Minsk (1966).

  42. V. V. Ivashechnko and T. M. Golubev, Poroshkovaya Met., No. 12, 13 (1965).

    Google Scholar 

  43. V. V. Ivashchenko, V. V. Skorokhod, et al., Poroshkovaya Met., No. 4 (1968).

Download references

Author information

Authors and Affiliations

  1. Institute of Materials Science, Academy of Sciences of the Ukrainian SSR, Ukraine

    I. D. Radomysel'skii & G. G. Serdyuk

Authors
  1. I. D. Radomysel'skii
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. G. G. Serdyuk
    View author publications

    You can also search for this author in PubMed Google Scholar

Additional information

Paper to the Ninth All-Union Conference on Powder Metallurgy, Riga.

Translated from Poroshkovaya Metallurgiya, No. 1 (85), pp. 10–20, January, 1970.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Radomysel'skii, I.D., Serdyuk, G.G. Shaping of metal powders - A survey. Powder Metall Met Ceram 9, 9–17 (1970). https://doi.org/10.1007/BF00796942

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00796942

Keywords

Search

Navigation